Question about Kenmore Washing Machines
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Unless your front loader is set firmly on concrete
and leveled to perfection, the force of a heavy wash load spinning in
excess of 1000rpm will create a bit of vibration and noise.A firm footing is your best defense against to much movement.
Also due to the earlier movements during the spin cycle, the shocks that are used to dampen the spin cycle might have been broken or damaged.
If the problem persists inspite of proper levelling, please do check for the shocks or might have them replaced them for good.
Posted on Dec 14, 2008
Sounds like you have a broken motor coupler. They are inexpensive. Can be a little tough to replace but I can walk you through it. You can purchase a coupler here.
Posted on Dec 19, 2008
Make sure all springs are still in their place tilt the machine back and look under it and you can see them. 2nd all legs must be level as well as the floor.
Posted on Dec 30, 2008
Tips for a great answer:
Dec 26, 2012 | Kenmore Washing Machines
Feb 22, 2010 | Kenmore HE2 Plus Front Load Washer
Feb 13, 2010 | Kenmore Washing Machines
Jan 07, 2010 | Kenmore Washing Machines
Sep 11, 2009 | Kenmore 3.8 cu. ft. HE3t Front Load Washer
Jul 23, 2009 | Washing Machines
Jan 03, 2009 | Kenmore 24032\24036 Top Load Washer
17 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: