Question about Lexmark X83 All-In-One InkJet Printer

1 Answer

Printing out blank paper

I bought a new black cartridge and the printer prints out blank paper what is the problem.Do i need to also buy the color printer?

Posted by on

  • crazy cancer Jan 04, 2009

    yes i set it to black ink and its a x4270 all in one

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 201 Answers

Under your windows did you check at the printer settings.. maybe you set it to print with the color cartridge only and now its empty. Check and set it to use black cartridge.

Posted on Jan 04, 2009

  • Jonathan  van Rensburg
    Jonathan van Rensburg Jan 04, 2009

    Take a tissue or toilette paper press it under the cartridge where the ink sprays out if the ink don't transfer to the toilette paper ir tissue it means that your cartridge jets are blocked you can steam it over the Kettle to open it but will fail again after a while. In my experience the cartridge is either refilled or a Refurbished one and not a original one.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kodak esp 5210 wont print black


I figured it out. If you are low on (25%) on either colors or black, then it won't print. Even if you load a new black cartridge and it reads as 100% black, it won't print because it will only print when BOTH cartridges have been replaced and reads 100%.
Same thing happens reversed with color being replaced.
So basically, ALL printers short you 25% ink and FORCE you to buy their ink more often. Kodak is no exception.
I have 100% black and 25% color and a BW only needed text paper won't print. I been through this before. *facepalm*

Apr 16, 2012 | Kodak ESP 7250 All-in-One InkJet Printer

1 Answer

Do I need a color cartridge to print in black ink


the paper was black or blank? i think you mean blank, the ink will dry out over time replacing the cartridges will most likely solve the problem, or for the cost of the two cartridges u may want to consider a new cheap printer.

Apr 23, 2010 | Lexmark Z715 InkJet Printer

1 Answer

Kodax Eps-5 Printer want print with one cartridge


No you need functioning colour cart for black to work.

Apr 28, 2009 | Kodak ESP 5 Printer

1 Answer

My canon pixma ip1000 prints,but no image/letters/colors ...blank


buy new HP printer you will have no problem with nozzels

Feb 07, 2009 | Printers & Copiers

1 Answer

HP Laserjet 1500 Color, Print out Blank


Hi devi960:
Pages print, but all
colors do not print or
the pages are
completely blank.
One of the print cartridges might be
low or empty.
Run an engine test and see if all four colors print. If
not all colors print, replace one or more of the print cartridges. If the
engine test is successful, replace the formatter.
If the printed pages are completely
blank, the file might have blank
pages.
Check the file to make sure that it does not contain blank pages.
A print cartridge might be low or
empty.
Check the printer control panel for a Supplies Status message,
print a Supplies Status page, or use the embedded Web server
(HP color LaserJet 2500 series printers only) to see the levels
remaining in the print cartridges. Replace any print cartridges that
are low or empty. Messages are not created for non-HP print
cartridges.
If you are using non-HP print
cartridges, one or more print
cartridges are low or empty. The
control panel lights do not indicate
low or empty for non-HP print
cartridges.
Replace one or more of the print cartridges.
Font DIMM might be selected but the
font DIMM is not physically installed in
the printer. (This issue applies only to
HP color LaserJet 2500 series
printers using an Asian-language font
DIMM.)
In the settings for this printer, clear the Font DIMM check box on
the Configure tab if no font DIMM is installed in the printer. Select
the Font DIMM check box only if the font DIMM is physically
installed in the printer. If you think that the font DIMM is installed,
make sure that it is installed correctly.
The paper curls when
exiting the top output
bin.
The paper needs to print to the
straight-through paper path.
Open the rear output door to print to the straight-through paper
path. Remove each sheet as it exits the printer.
The stack was slightly curled when it
was placed in the tray.
Turn the stack over in the tray.
The paper does not meet
specifications.
See the user guide for information about print-media specifications.
If you are printing on light media, the
Type setting might not be correct.
Select Light in the Type is field in the printer driver.

Nov 13, 2008 | HP LaserJet 1500L Printer

1 Answer

Printing blank paper


try a few things, your printer maintenance my need to be adjusted, such as settings. i have one at work and i hate it, canon printers are so non-user friendly. do you have both a black and a color cartridge in it, if so you will have to tell it in the maintenance settings, if you only have one or the other installed you have to put both in it wont print with only one cartridge. if you just bought it and still have everything that it came with...take it back and buy a lexmark.

Jul 25, 2008 | Canon PIXMA MP470 All-in-One Printer

1 Answer

Can we print with other three Color ink cartridges when Black Ink cartridge is emptied?


hi,

as u have ran out of ink you cant print anymore... you have to replace a new ink cartridge.... this is because when u print something, the colors will get mixed to print the exact color.... even if u are printing only in black, some other colors wil get mixed to produce the black color on the paper... so u need to change the ink cartridge.... u cannot run with a blank filled ink cartridge.... and the selection of your printer is very good...

thanks and regards
agnel

Mar 19, 2008 | HP Officejet Pro L7580 All-In-One InkJet...

8 Answers

Dell 720 printer won't print


Our Dell AIO A940 stopped printing black ink. Tried so many things, and finally (a year later) got it to print by selecting:

PRINT, PROPERTIES, PAPER SETUP, SPECIALTY PAPER, PHOTO/GLOSSY

It's worth a try! Good luck!

Oct 23, 2007 | Dell Inkjet 720 Printer

1 Answer

Canon ip4200


Hi You can buy canon refile "InkTec Canon BCI-5/BCI-6 color" and fill Remove the empty and try to print,or you can buy canon refile "InkTec Canon BCI-5/BCI-6 color" and full it,it`s cheap instead to buy everytime a new cartidges. Good Luck

Aug 19, 2007 | Canon PIXMA iP4200 InkJet Photo Printer

Not finding what you are looking for?
Lexmark X83 All-In-One InkJet Printer Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...