Question about Cyber Acoustics CA-5001 Computer Speakers

1 Answer

Forced 2.1 sorround sound on 5.1 surround sound

I just recently got a Cyber Acoustics Speaker set model: CA5001 Sound Card: Dynex DX-SC5.1 I have everything installed correctly on my speaker but it seems that the speaker is seemed to be forced to play on a 2.1 surround. I tried reinstalling the sound card but it did not change anything. One thing I did noticed howeever was that the center and Left Front input on the subwoofer are reversed in color. All I did for now. Any suggestions would be much appreciated and thank you for your time.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 2,985 Answers

Swap the inputs around see what happens Whether or not the out put is 2.1 or 5.1 has to be the nature of the signal going into the master unit So have you got the sound card set up right- check sound card software. Also check the Computer MoBo manual is there a BIOS setting that needs changing? Also contact the makers website Tech Help if the manual is of no help. take a look here

Posted on May 18, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The right main speaker has no sound but the left side and subwoofer work just fine

if the speaker has been at all moved the wire could have broken i currently have a cyber accoustics ca-4400 set and the wires are very flimsy looking and i previously owned a ca-3001 set and the sub wire on the 3001 broke after a simple move up from my basement and i went through like 4 power supplys on it until i just bought a non cyber acoustics supply so cyber acoustics cords are VERY flimsy and that may be why you are getting no sound from your right speaker

Mar 03, 2013 | Cyber Acoustics CA-3001 Computer Speakers

1 Answer

My surround sound works when it is a dvd movie. How can this output when cable is on?

The program from cable system, must be surround sound in order TV set works as surround sound system

May 11, 2011 | Dynex DX-L32-10A 32" LCD HDTV

1 Answer

Have a 32" dynex..... Sound is horrible... What

1. Find the volume control icon on the bottom right portion of your screen 2. Right click the icon 3. Select change default 4. Cycle through the options until you see the logitech speakers as an option 5. Select this new option 6. If you still do not see the logitech speakers then you need to reinstall them with the provided software. If you do not have software, download it for free from

Jan 21, 2011 | Dynex DX-LCD37 TV

1 Answer

One of my speaker channels has no sound

reinstall the speakers driver or your sound card driver. doing that select what kinda speakers do you have (5.1 , 2.1, 2).

Apr 06, 2010 | Cyber Acoustics A5640 Computer Speakers

1 Answer

No sound from Surround speakers of my onkyo reciever

Check speaker wireing make sure all positive and negative connections are correct. What cable are you running from tv or DVD player.check to see that wireing is correct on receiver for sorround speakers. Run audysee sound calibrator set up. Make sure correct settings for sorround sound in bluray player/DVD player

Sep 13, 2009 | Onkyo HT-S990THX System

1 Answer

Cyber acoustics ac-201 and it doesn't work!!

Hi itsonlyerin,

This has to be rather general as it's a bit hard to give you specific advise without knowing a bit more about your operating system and sound card.

Try checking the following:
(1) Headphone problem
First, I would try to determine if there is a problem with the microphone itself. Do you have another pair or a different model that you could try? If yes, then give them a go and see if the other ones work. If they do then take your ac201's back to the store and get a replacement. If you haven't got another pair then try them in another computer and see if you get a different result. If they work in a different computer then the phones are OK and we need to look into the computer hardware and software.

(2) Software Setup problem.
Have you made sure that on the recording controls that the microphone volume is turned up?

(3) Sound Card setup problem.
Some sound cards have multipurpose jack that for example can be switched between line input and microphone. Check with the card's documentation and especially check that the jack you are using is set to microphone and that you are plugged into the right one.

(4) Software problem - do you have the right drivers for your sound card loaded?

(5) Faulty Sound Card - try a different one.

Good Luck

Jul 06, 2009 | Cyber Acoustics AC-201 Consumer Headset

1 Answer

Only got sound threw 1 speaker, everything is connected correctly.

were did u get the drivers from my mate as i am in the same sh..

May 27, 2009 | Cyber Acoustics CA-5150 Computer Speakers

2 Answers


I installed the DX-SC51 software speaker is working but MIC not working and I couldn't find the way to turn it on

Aug 23, 2008 | Dynex DX-SC5.1 Sound Card

1 Answer

I can't seem to get my cyberacoustics to work (Speakers)

Hi, Perhaps the beeping sound you hear at start up is the internal speaker directly connected to the motherboard. If you Device Manager or your Control Panel/Sound & Audio Devices Properties/Audio tells you that nu such device is installed, what you need to do is re-install the necessary drivers. To confirm if the sound card is there/working but need drivers, go to your Device Manager, a yellow marked "!" will indicate that that component need drivers/re-installing. Post back with your motherboard brand/model that we may look for drivers or use the original motherboard CD installers. Good luck and kind regards.

Aug 22, 2007 | Cyber Acoustics CA-2012 Computer Speakers

Not finding what you are looking for?
Cyber Acoustics CA-5001 Computer Speakers Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cyber Acoustics Audio Players & Recorders Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Carlos L. Burgos
Carlos L. Burgos

Level 2 Expert

620 Answers


Level 3 Expert

77978 Answers

Are you a Cyber Acoustics Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides