Question about Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

2 Answers

Troubleshoot Bissell Lift-Off Revolution Pet Vacuum Cleaner

Bissell Lift-Off Revolution Pet Vacuum Cleaner just shut off while I was using it. I tried a different plug. Is there a reset button or do you think the motor burned out? Fix or replace?

Posted by on

  • 1 more comment 
  • Anonymous Mar 24, 2009

    Loved my vac for the first 4 months...now I vacuum 1/2 of my living room and it shuts off. I have to wait an hour to use it again. Why is it doing this??? Try to fix or replace???? HELP

  • Anonymous Mar 25, 2009

    same problem with the 3760-1



  • Anonymous May 07, 2009

    Vacuum keeps overheating and shuts off. I have cleaned all the filters, etc and it still does it.

×

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Probably a hose clog. Check the hose on the back of the cannister. Most likely clogged where it attaches to allow debris into the cannister. If cannister is not filling up, that's a sure sign. To remove from top of back of cannister, just turn the ring on the end of the hose to release. Take it outside and push a long thin object through it to force out the clogged hair or debris. The motor is designed to shut off the vacuum cleaner for 30 minutes when this happens to avoid burning up your motor.

Posted on Jun 07, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,673 Answers

I assume you mean the vacuum motor isn't running, could be the switch, cord or the motor, If you are able, I would start with the switch.

Posted on Jan 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The brush is not working when I turn the power on and the belt appears to be on and intact. How do I fix it?



This is actually a bad design by Bissell. Remove the Lift-Off portion of your vacuum cleaner. Down at the bottom, where the Lift-Off portion was sitting, you should see a small electrical plug part. What usually happens is this plug arc's, which causes it to burn the plug, and stop the power nozzle from spinning. If you see any black, or burning around this plug, take your vacuum back into Bissell, they will fix this, or give you a new vacuum for free. They don't even sell us their warranty stations this plug piece, you can only exchange it for a new vacuum.

If this is not burned, check the reset button for the brush, it's either located near the plug, or on the side of the brush portion of the vacuum.

I hope this was helpful to you.

Chris Jones
goVacuum.com

Jan 08, 2011 | Bissell LiftOff Revolution Pet Vac 37602...

1 Answer

My Bissell liftoff Revolution won't turn on. Is


Vacuums are not usually fused, but may have a circuit breaker--look for a small protruding button that when pressed, resets the breaker. The plug on the end of the cord may have a wire broken within the plug--replace it with one from a hardware or home center. Another common problem is the power switch may have failed. Order a new one from an appliance parts house. Good luck!

Apr 13, 2010 | Bissell LiftOff Revolution Pet Vac 37602...

1 Answer

My liftoff revolution smell like it is burning after I use it


That means that the belt is worn and is starting to slip. You need to replace the belt. Here is the belt you need and a manual you can view with instructions:

Bissell Lift-Off Revolution Belt and Manual

Mar 13, 2010 | Bissell LiftOff Revolution Pet Vac 37602...

1 Answer

It won't pick up. I cleaned all of the filters. what next?


I would try changing the belt. A worn, stretched or broken belt can cause the vacuum to not pick up well. Here is a link to the belt you need and the manual which has instructions:

Bissell Lift-Off Revolution belts and manual

Nov 17, 2009 | Bissell LiftOff Revolution Pet Vac 37602...

1 Answer

I have a 3760 lift off bissell. Replace the torn


Did you get the right belt size? The belt you should have bought is this one:

Bissell 3760 Belt

Nov 08, 2009 | Bissell LiftOff Revolution Pet Vac 37602...

1 Answer

The brush is not working anymore


Your drive belt is probably broken. They usually need to be changed every 6 to 12 months. If you haven't replaced the belt recently I would try that. You can get the belts you need through this link and also view the manual which has step by step instructions on how to change the belt. hope this helps!

http://www.vacbelts.com/bissell-lift-off-revolution-pet-vacuum-belt-.htm

Oct 25, 2009 | Bissell LiftOff Revolution Pet Vac 37602...

1 Answer

I think my bissell proheat 2x is plugged up with pet hair.


Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
rrtjgh

Sep 05, 2008 | Bissell 9500 ProHeat 2X CleanShot Upright...

Not finding what you are looking for?
Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum Logo

1,545 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Brad Brown

Level 3 Expert

16981 Answers

Jim Parker
Jim Parker

Level 3 Expert

1041 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...