Question about Kenmore Washer Door Latch W10404050
MY NEW WASH MACHINE THE BRAND IS WHILPOOL AND YOUR MODEL= WTW4950XW0 . THE MACHINE RECEIVE INLET WATER BUT NOT START TO WASH
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sounds like your pressure switch behind the control panel is stuck. Try unhooking the tube going to the switch and see if it breaks free. If not replace the switch.
Posted on Nov 19, 2008
You probably pinched the water fill hose that comes up from under the tub when you closed the cabinet. Also make sure it is free from trash in the bottom of the tub and that it is tightly connected to the water level switch.
Posted on Jan 06, 2009
most likely cuase would be the inlet valve
you would need the complete model number to make sure you get the right part for that unit.
Posted on Feb 24, 2009
You may have a defective cold water solenoid on the water inlet valve. There is a separate solenoid for hot and for cold. So, if you've confirmed the inlet screens are clear, more than likely you will need to replace the valve. If this is a Kenmore top loader, the following link explains how to replace a water inlet valve:
This is a very simple and inexpensive repair. The average cost is about $30-$35. A replacement can be purchased at any of the following websites:
If you need further assistance, please post back with your complete model number (located under the wash lid along the tub rim), so that I may be able to provide you with better service. I hope this helps you.
Posted on Oct 12, 2009
Tips for a great answer:
Mar 05, 2015 | Whirlpool Washing Machines
Jul 02, 2011 | Whirlpool WTW4950XW Washer
Jan 01, 2011 | Whirlpool Washing Machines
Aug 12, 2010 | Washing Machines
Apr 03, 2010 | Washing Machines
Oct 24, 2009 | Washing Machines
142 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: