Question about Cycling
Apparently the pedal has to come off before you can replace the strap but there is very little room for a tool between the pedal and the pedal arm.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
If this is a bicycle computer you're talking about there's a little magnet that has to be installed on the spokes of the wheel. It passes within 1 millimetre of a receiver which should be placed on the bicycle forks. Everytime the wheel turns the magnet passes a signal through the receiver to the computer which operates the computer. If the magnet is not tight enough it will turn away from the receiver and will not work. If it passes more than 1 mm from the receiver it won't work.
Posted on Jul 17, 2010
Tips for a great answer:
Mar 09, 2015 | Kettler Sport & Outdoor - Others
Feb 25, 2014 | Kettler Ergo Racer GT Indoor Cycling Bike
Dec 13, 2013 | Tunturi Pedal, Set, 1/2"
Aug 08, 2013 | Life Fitness X7 Elliptical w/Advanced...
Feb 18, 2013 | Life Fitness Bike Pedal Straps for...
Jul 17, 2010 | Kettler Cycling
Aug 26, 2009 | Tunturi Cycling
Dec 22, 2008 | Tunturi Cycling
28 people viewed this question
Usually answered in minutes!