Question about Hamilton Beach 63221 Stand Mixer

1 Answer

Trying to take apart the hamilton beach stand mixer to fix it

Hi - i can't figure out how to take this apart to get at the motor to fix it.....

Posted by on

  • chelby502 Jan 04, 2009

    Thank you - I followed your suggestion and I was able to remove the top and took the head off the base. I could not figure out how to open the body. I removed the screws from the body but it would not come apart.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,976 Answers

There should be a few screws on the underside that will allow you to remove the top. You may have to take the head off the base to do this.

Posted on Jan 04, 2009

  • David Shaub Jan 04, 2009

    Look for a pop in sort of plate, normally in the front with a logo on it. There are screws under this, if your particular model has one.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kitchenaid frozen bearing


Hi Thaddeus, What model is it? If you have taken it apart and checked the worm gear surely you would have stumbled on the frozen bearing if one exists. When you split the gear cases you are in a position to turn everything by hand so any frozen part is going to be pretty obvious.
Cheers Ross

Apr 24, 2016 | KitchenAid Food Mixers

2 Answers

Hamilton beach 950 cover removal


just press in two sides and remove it

Jun 11, 2008 | Hamilton Beach 950 Stand Mixer

1 Answer

Hamilton Beach Stand Mixer leaking grease


That would normally signify that that particular part is getting hot. Try and get inside that head and clean the old grease off and replace with High Melting Point Grease. This is the sort used on car wheel bearings.

Feb 05, 2016 | Hamilton Beach 800 Watts CPM700 Commercial...

1 Answer

Kitchenaid mixer motor noise at lowest speed


Hi,have you set you speed of your rotations,maybe it's set to slow.you have to Adjust the screws in the backof the mixer,so the rotation of the motor is a second apart on the speed setting three.i quite sure that's the right speed number,I have it written down somewhere,if I can find it and it's different il let you know.ty hopethatworks.

May 16, 2014 | KitchenAid K5SS Heavy Duty Commercial...

1 Answer

Broken gear


Refer this problem directly to Hamilton Beach as the primary source of the parts.

Dec 12, 2013 | Hamilton Beach Eclectrics All-Metal Stand...

2 Answers

The bushing in my kitchenaid KSM 90 cracked in half, how do I get it out of the hole?


Try tipping the mixer on it's side. the brush holder is a solid brass piece that goes all the way to the armature. You might also try fishing with a hat needle or a dental pick. If it truly is stuck in there and will not come out you are into a complete motor tear down to remove the brush holder to get at the culprit..

Sep 02, 2012 | KitchenAid Food Mixers

1 Answer

Need a manual for Classic Hamilton Beach Drink Master, is there on on line


The Use and Care Guide for the Hamilton Beach 727W DrinkMaster Classic Hand/Stand Mixer can be found online here:

http://useandcares.hamiltonbeach.com/files/840119400.pdf

Sorry someone has not responded sooner. Thank you for using FixYa!

Jun 29, 2011 | Hamilton Beach DrinkMaster Classic...

Not finding what you are looking for?
Hamilton Beach 63221 Stand Mixer Logo

Related Topics:

436 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hamilton Beach Food Mixers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

20318 Answers

Ruth summersides

Level 3 Expert

1046 Answers

Are you a Hamilton Beach Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...