Question about Office Equipment & Supplies
THERE IS INK BUT WON'T PRINT
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you have carried out 4 to 5 head cleans, waited about 8 hours and done another 3 or head cleans doing nozzle checks after each clean (as recommended by the manual) and there is still no improvement then you will need a third party head cleaning solution such as this one:
Other makes & brands are available just google "inkjet head cleaning solution" Hope this helps.
Posted on Apr 03, 2009
first, make sure you the paper correctly to avoid paper jam.
Single Sheets 1. Open the paper support and raise the extension. 2. Place your paper short edge first against the right edge of the feeder, under the tab, with the printable (whiter or glossier) side up. If you are loading multiple sheets, fan the stack of paper before loading it to prevent paper jams. Note: Don’t load paper above the arrow mark inside the left edge guide. Some special papers can be loaded only one sheet at a time. Slide the left edge guide against the paper. Make sure it is snug, but not so tight that the paper is bent. (For letter- or A4-size paper, you may not need to move the edge guide over.) 4. Open the output tray and pull out the extension. You should also follow these guidelines: • Always load the short edge first, even when you’re printing landscape-oriented pictures. • When using special papers, check the paper package for additional instructions. Some papers require using a support sheet included in the package. Note: Always keep unused paper in the original package and store it flat to prevent curling.
if you loaded the paper, it jammed again, remove the paper and tried to print, still the same, its a hardware issue, alraedy, the printers roller is broken
Posted on Feb 13, 2010
Be sure you are using genuine epson ink. Epson printers are "smart" and will not allow generic ink to work properly. Even after you replace a generic with a genuine it may take several print outs and alignments to get it to print again.
Posted on May 05, 2011
your black ink cartridge got bad sprayer nozzles now you gotta replace it
and why the other color one is not bad yet cus printer as will known will depend on black ink far more so the black cartridge is heated up more times
Posted on May 27, 2011
SOURCE: I have to print a
here's a solution i came across when dealing with the same problem. apparently the printer expects all of the cartridges to be full and has a sensor to make sure they are even when only printing black. hope this helps!
Posted on Jul 13, 2011
Testimonial: "Thank you so so so so much!"
Tips for a great answer:
Jan 02, 2013 | Epson Stylus DX6050 All-In-One InkJet...
Sep 25, 2012 | Lexmark 90T6005 Prospect Pro205 All-in-One...
Sep 15, 2012 | Epson Expression Home XP-200 Wireless...
Apr 21, 2017 | Epson Computers & Internet
Feb 24, 2012 | Epson Workforce 520 Printer
Aug 24, 2011 | Apple Computers & Internet
May 16, 2011 | Epson Stylus Photo R340 InkJet Printer
May 05, 2011 | Epson TX300F Series
May 05, 2011 | Epson Stylus CX6000 All-In-One InkJet...
385 people viewed this question
Usually answered in minutes!