Question about Kenmore 24032\24036 Top Load Washer

2 Answers

KENMORE WASHING MACHINE MODEL#110. 254872300 WONT SPIN

WILL NOT SPIN. WILL FILL UP AND DRAIN, AND AGITATE. IS NOT A DOOR LATCH PROBLEM.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 311 Answers

If your sure it will agitate?[because the pump is on the other side of the motor and will drain,but if coupler broken ,wont agitate or spin although it makes noise like its working.so if will truely agitate drive coupler fine and its going to be the clutch or that area unless somthing[clothing] is between the two tubs creating anough resistance to stop the tub from taking off.clutch pads will just slip on drive plate.hope that helps>God bless ,tom

Posted on Jan 04, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Tom are agitate will not turn but the motor sounds like it wants to run .what do you think. God bless you and thank you so much. Al \

Posted on Mar 28, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washing machine won't drain but it will spin.


sounds like a motor problem, the motor turns 1 way to agitate and the other way to drain and spin

Feb 16, 2010 | Kenmore Washing Machines

1 Answer

Won't spin


I replaced the door switch/latch assembly. It works!

Sep 03, 2009 | Kenmore 43142 Front Load Washer

2 Answers

Machine doesnot agitate or drain once filled with water


it sounds like a bad lid switch if it will not drain or spin,the switch controls that-mike

Apr 24, 2009 | Washing Machines

3 Answers

Kenmore washer 80 series 110 model not spinning.


unless your washer is over 20 years old, then it wont have a belt. the temperature of the water wont have anything to do with it spinning or not.
need to know if it agitates or drains and just wont spin.
if it agitates but no spin or drain, then you have a bad lid switch.
if it wont agitate or spin, but will drain, then you have a broken drive coupling.

Jan 08, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer 110 20912 990 will not spin or empty


sounds like perhaps you dissconnected the door latch assy,and never reconnected??? hte unit will not spin/drain with the door latch not making contact

Dec 13, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer model 110.49722990 it will not go into the drain or spin part of the cycle, just sits there and hums, won't do anything. It will fill with water and wash,but thats all it won't finish the...


Does it fill with "cold" water?Will it spin?Drain?If the machine will fill up with cold water,will the timer advance by itself to finish?Or if you place the timer in spin cycle will it spin?First off if your not getting "Cold" water to fill inside :Replace the water valve (because when the timer stops after the agitation cycle it wont advance because it cant fill up with cold water.

May 23, 2008 | Kenmore Washing Machines

3 Answers

Kenmore 70 series


Okay...I'm a little confused on your symptoms. You initially said it fills, but doesn't agitate or spin, but drains.

Then, you finished with the washer filling, no agitate or spin, but now doesn't drain.

Which one is it?

The symptoms you describe are usually associated with the following:

1. Fills, may or may not agitate, won't spin or drain - lid switch.
2. Fills, may or may not agitate, won't spin, but still drains - motor coupling.
3. Fills, may or may not agitate, won't spin or spins slow - gear case.
4. Fills, agitates, spins, but does not drain – water pump.

NOTE: These are the more common failure items with these symptoms.

Double check the lid switch by opening and closing the lid. You should hear a clicking noise to indicate the switch is working. The switch is located under the top panel along the wash tub rim on the right-hand side. If not, check to make sure the lid strike (small plastic piece on the lid itself) is in place. This activates the lid switch when the lid is closed. Also, check the mounting screws along the rim (there are two of them) to see if they are tight.

If the motor coupling were bad, the washer would still drain, but there would be a rattling sound as the washer tries to spin or agitate.

If you need replacement parts, go to searspartsdirect.com and type in your model number in the "Search by Model Number" window. The lid switch can be found under the "Top and Cabinet" heading as item number 11 (part #3949238). Instructions on how to replace are located at the following link:

http://www.fixya.com/support/r385199-replacing_lid_switch_whirlpool_top

If you wish to replace the motor coupling, the part can be found under the “Brake/Clutch/Gearcase/Motor/Pump” heading as item number 13 (part #285753A). If you need instructions on how to replace, just follow this link:

http://www.fixya.com/support/r385250-replacing_motor_coupling_kenmore_top

Now, there’s a couple of ways to drain the washer. If it’s a simple lid switch problem, you don’t need to drain the washer to replace the switch. With a broken switch repaired, the washer will run and drain by itself. However, if you wish to drain the tub you can use a shop vac to pull a vacuum on the drain hose. This may take a few times depending on the size of the shop vac. These wash tubs typically have about a 35 gallon capacity. If you do not own a shop vac, you can by-pass the lid switch by jumpering the two BLACK wires at the lid switch connector that is connected to the console. CAUTION: Make sure you UNPLUG the washer before jumpering, then plug back in.

I hope this information is helpful to you. If I’m wrong about the symptoms, please post back and update me on what the washer is or is not doing, so I can assist you further.

May 15, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 90 series that wont agitate or spin


Could be the door switch, do you hear a clicking sound when you close the lid?

Does the motor hum at all in drain/spin?

Mar 12, 2008 | Kenmore 45981 Washer

2 Answers

Kenmore Washine Machine does not drain


sounds like a bad lid switch, agitates but doenst advance to rinse, remains full of water?? if so lift the lid up and downa few times hear a "clicking" noise??machine doesnt think lid is closed so for safety reasnos wont spin/drain replace the door latch

Mar 10, 2008 | Washing Machines

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

876 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...