Question about Plantronics 510 Voyager Headset - PLN-510 Headset

1 Answer

No voice command on headset.

I have somehow turned off the voice command option on my Voyager 510 telling me to "say a command" when I was trying to change the accent from English to American. How do I switch that back on and change the accent?

Posted by on

  • Glenn Jan 04, 2009

    Hey Nick, I'm confused? Where is the control panel on my Bluetooth device? It has a power (on/off) switch, a volume up and down button and a silver button adjacent to your ear hole. If you could help me with the sequence to re-activate it, that would be greatly appreciated. Cheers!.

  • Glenn Jan 04, 2009

    Mate,

    Thanks so much for trying, but I only have the headset and nothing I can see on those instructions suggests how you can change the accent.

    I appreciate your perseverance.


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 45 Answers

Control Panel -> Speech -> Speech Recognition

Hope this helps.

Posted on Jan 04, 2009

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i connect my plantronics 510 voyager headset to my blackberry


Once you make your BlackBerry discoverable, then put the Plantronics Voyager 510 into pairing mode by holding the call control and volume up buttons at the same time until the headset flashes red and blue. Here is the link below for the 510 pairing instructions.

Plantronics Voyager 510 Pairing Instructions

Good luck from Headsets Direct!

Oct 19, 2011 | Plantronics 510 Voyager Headset - PLN-510...

1 Answer

Syncing it to my 3g I-phone without a manual


This link should help you pair your voyager 510 to your iPhone:

http://www.headsetsdirect.com/plantronics-voyager-510-bluetooth-pairing-instructions

Good luck from Headsets Direct - 800-914-7996.

Aug 22, 2011 | Plantronics 510 Voyager Headset - PLN-510...

1 Answer

Can't hear my pc to head set..can u help


Hearing a Plantronics Voyager 510 headset through a computer:

To use a Plantronics Voyager 510 headset through your computer, you either need a USB Bluetooth adapter or you must have Bluetooth built in to your computer. Once the Voyager 510 headset is "connected" to your pc (by one of the mentioned ways), you may need to go into the control panel on the computer or the specific software program being used to set the Plantronics Voyager 510 headset as the "default device". Keep in mind that the headset has to be powered on and to also have to activate the headset to connect to the Bluetooth adapter or computer.

Good luck from Headsets Direct - 800-914-7996.

Aug 20, 2011 | Plantronics 510 Voyager Headset - PLN-510...

1 Answer

When trying to pair my plantronics voyager 50 to my iphone, i am attempting to get the blue and red light to flash by pushing the up volume and the call button. but no flashes occur, even after 60 seconds...


  1. Turn on Bluetooth within your phone. Put phone into pairing mode.Put headset into pairing mode - With headset on, press and hold call button and the volume up simultaneously until the headset begins to flash red and blue.
  2. Pick the headset for Plantronics when prompted. Enter "0000" (four zeros)
  3. you should now have a continuous blue light blinking.
  4. Choose "Yes" if your phones asks if you want to bond to the Voyager 510 bluetooth headset.
Good luck from Headsets Direct - 800-914-7996.

Aug 13, 2011 | Plantronics 510 Voyager Headset - PLN-510...

1 Answer

How do I put the unit in discover mode


Putting the Plantronics Voyager 510 into pairing mode:

With headset on, press and hold the call button and the volume up simultaneously until the headset begins to flash red and blue.

Select the Plantronics 510 headset in your phone when prompted and enter 0000 (4 zeros) as the PIN/passcode if prompted. When paired, the Voyager 510 headset should now have a continuous blinking blue light. Here is a link below for the step by step pairing instructions.

http://www.headsetsdirect.com/plantronics-voyager-510-bluetooth-pairing-instructions

Good luck from Headsets Direct - 800-914-7996.

Aug 12, 2011 | Plantronics 510 Voyager Headset - PLN-510...

1 Answer

How do you sync a plantronics 510?


allanrecht

The steps below will show you how to put your Voyager 510 into pairing mode.

To put the headset into pairing mode:
1 - Start with the headset powered on (the headset will have a blue blinking light).
2 - Press in and hold the + side of the volume button (long, thin and silver) and the Call Control Button (on the
microphone boom, oval shaped) until the headset flashes red, blue, red, blue.
3 - Tell your phone to "Find the new Bluetooth device" (see the User Guide or call a local phone store).
4 - If the phone asks for a User Code or passkey, enter 0000 (four zeros).


Issken

Jan 25, 2010 | Plantronics 510 Voyager Headset - PLN-510...

2 Answers

How do i put my 510 earpiece in the pairing mode


Press and hold the switch for about 30sec ...after that it will be in pairing mode ...and enter 0000 as passkey

Oct 20, 2009 | Plantronics 510 Voyager Headset - PLN-510...

3 Answers

My Plantronics Voyager 510 will not go into pairing mode.


i actually got this to work with my iphone 3G S. i pressed the little black button then saw a blue light flash, and then i pressed and held the + volume button and the call control button until it started blinking blue and red and my iphone picked it up instantly. it did take a couple of times to get the headset to go into pairing though

Jan 16, 2009 | Plantronics 510 Voyager Headset - PLN-510...

4 Answers

Plantronics Voyager 510 & Blackberry Curve


 Plantronics Support Phone Number: 1-800-544-4660 
Do not use the power button to sync.
To sync device, Press + button (volume) and Silver button (on boom) at simultaneously. LED Light will blink RED & BLUE.  Device ID should appear on your screen.

Jan 14, 2008 | Plantronics 510 Voyager Headset - PLN-510...

2 Answers

Blue tooth pass code


Typical pairing code for PLT Voyager 510 is 0000

Dec 19, 2007 | Plantronics 510 Voyager Headset - PLN-510...

Not finding what you are looking for?
Plantronics 510 Voyager Headset - PLN-510 Headset Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plantronics Headsets Experts

sonic boom...
sonic boom...

Level 3 Expert

1557 Answers

Nataly Roberts
Nataly Roberts

Level 2 Expert

30 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Plantronics Headset Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...