Question about NewCon Optik NZT 22 Goggles

1 Answer

NZT-22 Infrared night vision goggles do not work

Faded over about one year.  Can you help fix??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,090 Answers

Fixing of this problem is rather expensive and almost impractical in cost

By fading I am presuming the display deteriorated to give vision like one imagins a cataract causes.If so:-

My question would be , have you kept the unit closed from daylight and avoided exposure to bright light, even at night ( car headlights, Neon etc) You dont have to be wearing them to have them affected by light, carrying them withe protection shields off will still damage them.

The quality of the internal battery, can also affect the quality of night vision being delivered. Have you rreplaced the batteries and tested the unit for improvement?

\Finally... moisture can also affect the visuals, they should be kept in their pocket and stored with silicon crystals to ensure no moisture gets into the lenses or anywhere else.

There are several places on the Internet that specialize in the selling and repair of these units. I would suggest you arrange for an inspection with onje of them to determine what the fault is. Optical damage, battery, moisture.

Thanks for using FIXYA

Posted on Oct 13, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Cyclops-1 night vision owners manual

If there is one available, these folks should have it or one similar.

The complete name is

Kalinka Cyclop 1-V NZT-1M2 Monocular

Jan 13, 2012 | Night Vision & Thermal Optics

1 Answer

I left my Night Owl NZT-1c in my garage for about a year, changed the batteries and it doesn't work. When I push the button, I hear the "clicking sound it always made, but there in no visible ligth...

Was the battery in it for a year? If so, look at the battery terminal and see if there are corroded. If they are clean them until the are cleaned of the corrosive substance. Then try it with a new battery that is the correct size. stewbison

Mar 23, 2011 | Night Owl Optics NZT-1C

1 Answer

Unit simply does nothing when its turned on. the IR assist still works. (AN/PVS-7B/D

Letto, This PVS-7B has a generation II image intensifier tube in it. The image tube is manufactured by ITT liton company. The only way to fix this wonderful NV devise is to send to ITT Night Vision Company. They are listed in the internet. Unless you can find someone to work on it, but the really need to know what they are doing. stewbison

Mar 01, 2011 | US Night Vision Ultra PVS-7B Goggles

1 Answer

I recently accuired a pair of an/pvs-7b night vision goggles. When trying them out they didnt work. I checked the batteries already in them, there was no old crusty battery acid. I replaced them and still...

Hello, there two things that can bad. One is the oscilator with voltage multiplier or the image intensifier tube. Send to Morrison Optics Co. GB....stewbison

Nov 22, 2010 | US Night Vision Ultra PVS-7B Goggles

1 Answer

It wont power on?

It's probably the capacitor, or the pushbutton energizer.

It's really easy to dis-assemble this unit, and it works really well for a $100 night vision scope.

You can replace the pushbutton with a toggle switch from Radio Shack.

Dec 01, 2009 | Kalinka Cyclop 1-V (NZT-1M2) Wide Angle...

1 Answer

I need fix night vision goggles

Check l that the HV is present at tube. If it is, suspect tube. If not, check the HV circuit - these vary, but most competent electronics trained technicans should be able to fault find on these.

Nov 27, 2008 | Night Vision & Thermal Optics

1 Answer

Night vision

go to google then click on shopping it is the best way to get items hope this helps.

Feb 21, 2008 | NewCon Optik NZT 22 Goggles

Not finding what you are looking for?
NewCon Optik NZT 22 Goggles Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top NewCon Optik Night Vision & Thermal Optics Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers


Level 3 Expert

60792 Answers


Level 3 Expert

2042 Answers

Are you a NewCon Optik Night Vision and Thermal Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides