KM443. What does error code tc41 mean? - Miele Cooktops

The error code you posted is not listed anywhere. There is the error code "Error" for the oven which means oven overheating. If that's true then the problem is a bad oven power relay board.

This part has been discontinued. Bosch probably replaced it with a different part but I was not able to find the correct part number. You can talk to APP CSR and they will help you to locate the correct part.

When an "F" and a number appear in the display and the cooktop beeps you have a function error code.
Touch the CONTROL LOCK pad.
Disconnect power to the cooktop and then reconnect.
If an F-code appears again, call for service.

Hi,

If you have an illuminated red key symbol on the cooktop, press down where the illuminated red key is, for about 5 seconds. This method works on many Schott Ceran / Miele cooktops including the KM443 listed above.

If this doesn't work, please let me know the correct model number.

Hope this helps.

Regards,
BElectric

Sorry to read about your problem, I hope this helps you out.

try to reset, by turning off and on your circuit breaker, if that does not help, you have a defective main control card. contact http://mieleusa.com/

I tried to help you. Please help me and Rate/Vote on my response. We take the time to answer your question's. take the time to rate us.Thanks and good luck

4 Thumbs - Very Helpful
3 Thumbs - Helpful

its very expensive...much better to but a new one...ceramic hob with knob control not the touch control...

It could be the switch. I have a handy video that shows what to check: HERE

60 amps and 220 volts

as far i know it is normal if u put at high control after a sec,the sencor control is turn off then a sec again it open coz of the sensor, design the sensor for not overheating the hob.it is normal try to position the control in in not a max position.or the pot u use is exactly in the circle or bigger dont put a small one in the bigger hole of ur elctric hob.tnx

seeming like you forget how to lock off.
keep the lock icon pressed stronger and longer,until will hear a beep,then turn it on

I have the same problem. i've been on the phone with Miele tech support. i'll let you know if i have any luck.