Question about GE 25865 Cordless Phone

1 Answer

New Voice mail flashing on phone but no new messages

The base and handsets all have "new voice mail" flashing but I have no new voice mails. What does this mean and how to I get rid of it? I currently use a phone service to retrieve messages but when I call from each phone or the base it says no messages....How do I get rid of the flashing "new voice message" when I have no messages?

Posted by on

  • RichardFerro Feb 14, 2009

    i have s new phone it is flashing new voice message

    but i can not retrieve the message from the phone I up arrowed and it

    showed who called but when i pressed for the messages it said no message each person stated they left a message

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 57 Answers

Have someone call you and leave you a message. then listen to the message and that might reset it.If that dont work call the manufacturer and they will walk you through it and should not charge you for it.

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I forgot how to clear the stored voice mails


Les,

If you want to delete the actual voice mails, you have to go through your phone company (using their keypad commands) since voice mail is only accessible through your phone (but the voice mail messages are stored through your phone company provider).

Info from the Uniden DECT 6.0 6035 Manual:

Using the Voice Mail Service If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. The new message LED on the handset ?ashes and VM appears in the handset display whenever you have messages waiting in yourvoice mailbox. When you subscribe to the service, your voice mail provider provides you with the access number and the required voice mail signaling tone. You can use your phonebook to store the access number.

Resetting the Voice Message Waiting Indicator

When you receive a new voice mail message, the new message LED on the top of the handset ?ashes and
appears in the handset display. In the event your message alert tone gets out of sync with your phone company's voice messaging system, you can reset back to its original "no messages waiting" state. To reset, press and hold [?nd hs] on the base for ?ve seconds. A beep sounds and the message alert tone is reset.

Here is the manual:
Uniden 6035 1 Owner Manual

Nov 01, 2015 | Uniden DECT 6.0 Cordless Telephone...

1 Answer

How do I retrieve voice mail messages from my uniden dect 6.0?


If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. The new message
LED on the handset flashes and appears in the handset display whenever you have messages waiting in your
voice mailbox. When you subscribe to the service, your voice mail provider provides you with the access number
and the required voice mail signaling tone. You can use your phonebook to store the access number

Feb 13, 2013 | Uniden DECT 6.0 Cordless Telephone...

2 Answers

Cannot clear message on handset that says I have a voice message.


I resolved the problem but I'm not 100% sure of how I did it. If it happens again I'll try it again. I left the answering machine OFF so the Voice Mail would take any messages. A friend phoned and left a message in the VOICE MAIL, I knew this because of the broken dial tone when I went to make a call. When I erased his message the 'New Voice Message' displayed on the handset disappeared. I figure a previous caller hung up just after the voice mail picked up. It was not long enough so it did not register in the voice mail but somehow registered on the GE phone. Since there wasn't anything registered in the VOICE MAIL to erase the message was 'stuck' on the handset display. As soon as there was a message registered in the VOICE MAIL that could be erased it also cleared the message on the handset.

As i mentioned, if it happens again I'll try it to see if it works, until then I am not going to tempt fate.

Dec 24, 2009 | Uniden Cordless Phone

1 Answer

My handset displays "New Voice Mail" and the base displays 00.


This is the problem, thebase charge light flashes continuously,It says that I have a new voise mail and the the base says (00)

Mar 04, 2009 | Uniden Cordless Phone

1 Answer

Model 28118


the same as above the voice mail light keeps flashing when there are no messages

Oct 12, 2008 | Uniden Cordless Phone

3 Answers

CD445


i still have flashing red light and the message now reads phillips
new message

how do i get this message
what number do i use to set up voice mail since i do not subscribe to voice mail? When i activate voice mail i get the operator

i still have faith that we can solve this problem

peace

robert barnes

Jul 04, 2008 | Philips CD4451S/05 Phone

5 Answers

New Voice Mail flashing light


press "mute" key to access menu, press the up or down arrow key labeled "caller ID- volume" until you get to "handset setup", press the "mute" key again, press the down or up arrow until you have "defaultsetting" selected, press "mute" key, press "1", then press "mute" once more. At this point your handset will reset clearing the indicator for all the handsets. I've had to do this twice on my phones and it worked every time.

May 10, 2008 | Uniden Cordless Phone

2 Answers

New Voice Mail flashing light


What worked for me was to call my phone from another phone and leave myself a voicemail. I then went in and retrieved and deleted that voicemail. Once I hung up from my voicemail service my handsets reset about 10 seconds later.

I hope this helps!

Apr 05, 2008 | Uniden Cordless Phone

7 Answers

Displays new voice mail and VMWI constantly blinking when no voice mail


Subscriber is T-Mobile@Home. First, cleared all messages from T-Mobile voicemail.

Now to fix your GE phone:


Push the program key. Select Handset Setup Push the program key Select Default Settings Push the program key Select 1 Yes. Push the program key
Hope this helps.

Mar 06, 2008 | Uniden Cordless Phone

Not finding what you are looking for?
GE 25865 Cordless Phone Logo

Related Topics:

539 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts

kakima

Level 3 Expert

96576 Answers

Cindy Wells

Level 3 Expert

4758 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...