Question about Lasko Heating & Cooling
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Instruction Manual for HZ-705
HZ 709 This model# is the closet we'll are gonna get unless I can find my manual and get it scanned. Scroll down to page 4.These instructions will give you a basic idea how this heater works. Good Luck :-) http://www.honeywellcentral.com/ssi/pdf/honeywell-commercial/oil-filled-heaters.pdf
Posted on Nov 22, 2008
The screws are "Tamper-Proof Torx" head, it takes a special T15H tool bit to remove the screws. I just disassembled one of these non-working units and the problem with this unit is a open diode on the heater element board. Not sure the purpose of the diode, but no voltage is going through it. I doubt if parts are available as I see no link for parts on the www.kaz.com website. This unit has been quite hot inside as the plastic mounting peg for the heater element board is melted near the diode area.
Posted on Nov 18, 2009
There is a bottom element and a top element so the elements could be dead.
More likey, there could be no power coming from the wall - there are switches on the front that need to light up or the thermostat could be set to off.
Posted on Dec 07, 2009
when most ceramic room heaters stop working, the blower is clogged with lint and dust from floor use . get an air compressor, or a can of air. take unit outside using a small head philips driver remove screws while laying on an old sheet .disassemble cover carefully and blow dust away from you and clean blade without bending with a toothbrush in vinegar water not gettting any liquid on the electrical parts. reassemble. thanks karl
Posted on Dec 14, 2009
SOURCE: how do you set heater to work?
That is the manual you need. Hope it helps. If you need anything else, let me know.
Posted on Feb 20, 2010
Tips for a great answer:
Nov 24, 2013 | Honeywell HZ-709 Oil Filled Radiator...
Feb 03, 2013 | Honeywell HZ514 Baseboard Heater
Kaz, Incorporated • Consumer Relations Department
250 Turnpike Road, Southborough, MA 01772
Toll Free: 1-800-477-0457 • E-mail: email@example.com
And see if they even offer replacement parts for the Kaz - Honeywell Model HZ-690.
I do not know of any other source except a trial and error CASTER hunt at the local LOWES, MENARDS, or HOME DEPOT
Jan 20, 2011 | Honeywell HZ-690 Oil Filled Radiator...
Sep 23, 2010 | Honeywell /KAZ HOME ENVIRONME HZ-705 7Fin...
Jan 08, 2010 | Honeywell HZ-709 Oil Filled Radiator...
Dec 29, 2009 | Honeywell HZ-709 Oil Filled Radiator...
Nov 19, 2009 | Honeywell HZ-709 Oil Filled Radiator...
Jan 02, 2008 | Honeywell /KAZ HOME ENVIRONME HZ-705 7Fin...
Nov 03, 2006 | Honeywell /KAZ HOME ENVIRONME HZ-705 7Fin...
55 people viewed this question
Usually answered in minutes!