Question about Nu Mark Numark Cdx Table Top CD Player CD Player

3 Answers

My Numark Cdx won't read cds. It just ejects them.

Where can I send it to be repaired?

Posted by on

  • barnes200000 Jan 27, 2009

    it is a very common problem with cdx players.
    I had my deck four times repaired.
    Motherboard replacement, cable trick ,... etc etc
    After a while the problem occurs again.
    Sales represantive said me cdx is a problem machine.



    I will sell it. Its simply to untable.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

GO ONTO YOUTUBE. TYPE IN NUMARK CDX FIX. Follow the video as instructed and this will be fixed.

Posted on Mar 31, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

I fixed mine by ordering a new laser pick up kss 213c the oem sony versions fail quickly I only paid $7.99 for mine from electronix.
Note you have to de solder a solder bridge on the new pic ups not hard to do.

Posted on Mar 17, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After looking at the insides of the cdx I discovered the ribbon cable problem can be fixed by using a parallel printer cable and soldering it to the board. This is a permanent fix and it eliminates multiple unnecessary connections. If you are good at soldering it can be done. The centronix end plugs into the cd drive and after removing the ribboncable and the adapter on the back of the cd drive you solder the wires to the mainboard. I will upload my pin layout for anyone that wants to try this fix.My Numark Cdx won't read cds. It just ejects them. - 5fce075.jpg

Posted on Aug 28, 2010

  • djmadness72
    djmadness72 Aug 09, 2012

    Could you send a clearer pin layout for this fix. I can't see the pin numbers on your photo. Thanks.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My cdx sounds really terrible


hello
faced the same pb only with MP3s audio tunes burnt on cds (crackles..pops ect ) - no prob with normal cds

Nov 23, 2009 | Nu Mark Numark Cdx Table Top CD Player CD...

1 Answer

CDX keeps ejecting CDs some seconds after insertion


Replace the drive!!! I have six and this is the ONLY problem I see with these units!

Oct 08, 2009 | Nu Mark Numark Cdx Table Top CD Player CD...

1 Answer

My Numark Cdx and Numark Cdn90 are frozen


Hi Mitchdias,
Have you tried downloading the most recent rom update for the CDN-90? All you need to do is download it from here http://www.numark.com/contentmgr/showdetails.php/id/1493/tt/5 , then burn the download to disc. Once that's done, put the disc into the player, switch the player off and wait 10 seconds, then switch it back on again. the player will read the disc and flash the ROM. this should reset the player for you. Before you ask, you can out the disc into either side of the player. Full instructions are given with the download.

Jan 05, 2009 | Nu Mark Numark Cdx Table Top CD Player CD...

1 Answer

Numark CDX Search (for fast forward and rewind) not working.


Possible switch fault or servo problem,if you havent had it repaired you can send it to us.

Regards.

http://www.audiovisualservices.info/

Nov 15, 2008 | Nu Mark Numark Cdx Table Top CD Player CD...

1 Answer

Numark cdn95 left player skip even with new cds


CDN95 uses the same CD transport as a CDX, aka....junk. Its mostly likely defective, replace left CD drive.

Oct 13, 2008 | Numark CDN95 2-Disc CD Player

1 Answer

Drive wont read


Hi, in most cases a new laser drive will fix it but these players tend to have some servo problems,if you havent had it repaired you can send it to us.

Regards.

http://www.audiovisualservices.info/

Sep 23, 2008 | Nu Mark Numark Cdx Table Top CD Player CD...

1 Answer

TWO CDX DECKS TWO DIFFERENT PROBLEMS


Fault 1: sounds like a servo or laser pick-up fault.
Fault 2: sounds like a broking track on the pcb or dry joint at the phono output stage.

If you havent had it repaired you can send it to us.

Regards.

http://www.audiovisualservices.info/

Aug 13, 2008 | Nu Mark Numark Cdx Table Top CD Player CD...

1 Answer

Problem w / no reading


Sounds like a laser pick-up fault or servo problem,if you havent had it repaired then you can send it to us.

Regards.

http://www.audiovisualservices.info/

Aug 11, 2008 | Nu Mark Numark Cdx Table Top CD Player CD...

1 Answer

CDPops Out *EDITED*


Does it pop out immediately? If not, listen carefully to the drive after you insert the disc. Can you hear the disc spinning? Any activity from the laser? If the disc is not spinning but you can hear the faint whirring and clicking of the laser transport, it could be that the laser itself has failed - it's the laser that detects if a CD is present. If it doesn't detect anything (due to being knackered!), the disc will not spin and will eject.

Oct 31, 2006 | Nu Mark Numark Cdx Table Top CD Player CD...

Not finding what you are looking for?
Nu Mark Numark Cdx Table Top CD Player CD Player Logo

Related Topics:

1,651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nu Mark CD Players Experts

Custom Exchange
Custom Exchange

Level 3 Expert

397 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

The Knight
The Knight

Level 3 Expert

68408 Answers

Are you a Nu Mark CD Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...