Question about Drills
It doesn't have a swith to reverse the drill?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: how to change drill bit
Grab the end of the chuck in one hand, and the outer ring of the chuck nearer the motor, and twist the chuck end. try both directions until it loosens.
Posted on Jan 28, 2009
starting with the variable speed the switch part # is 2607200457 and list for 47.58, the gearbox part # is 2606200930 and lists for 75.90 and lastly the motor part # is 2607022865 and lists for 75.90, the grinding could be the motor bearing going out or the magnets cracked, if you want to tackle this I suggest going to Boschtools.com and on the left side towards the bottom type in your model number so you can look at a breakdown of this tool. Before I started spending that kind of money I would think about possibly replacing it. If I have helped you would you please rate my response accordingly and Thank you.
Posted on May 27, 2009
You can contact a Dewalt Service Center to see if they have the diagram. Black and Decker is Dewalts lower priced line. A quick search on their website did not reveal anything. They may not have the diagram. As far as I know there are no parts available for the chargers so you may have a hard time locating the diagram. Try giving Dewalt a call.
Posted on Sep 11, 2009
remove the chuck retaining screw LH thread, and then find a bent handle allen wrench about the chuck capacity and insert the shorter piece in the jaws and tighten, Shift the tool to the low position (if it has one) and the selector to drill only (if it has one) position the chuck on a block of wood at about a 30 degree angle so you can strike it counter clockwise and hit it with a hammer, it might take a couple times but it will come off. Reinstall in reverse order,
Posted on Oct 10, 2009
Tips for a great answer:
Dec 25, 2016 | Rotary Drills
May 29, 2012 | Office Equipment & Supplies
Feb 27, 2011 | Black & Decker 3/8" Variable Speed...
Apr 16, 2010 | Black & Decker 3/8" Variable Speed...
Jan 15, 2010 | Black & Decker 3/8" Variable Speed...
Oct 02, 2009 | Black & Decker 3/8" Variable Speed...
Sep 07, 2009 | Black & Decker 3/8" Variable Speed...
Jul 10, 2009 | Black & Decker 3/8" Variable Speed...
Oct 14, 2017 | Drills
57 people viewed this question
Usually answered in minutes!