Question about Sewing Machines

Open Question

Threading 925 DCX Elna serger - Sewing Machines

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Michaelle
  • 65 Answers

SOURCE: Replacing needle on Elna Pro 905 DCX serger

Try and loosen the screw, and use a magnet to pullout the broken piece. It likely slightly bent in there so you may need a pair of tweezers as well
Good luck!






Posted on Jan 24, 2009

isaiahpro
  • 35 Answers

SOURCE: Elna serger 925 presser foot lift lever broke off.

Purchased an Elna Pro 925 DCX and it was missing the sewing cover to do sewing without using the blades. This is a plastic cover piece that snaps on to the machine when coverstiching. Where can I fing this part?

Posted on Aug 19, 2010

bargainbox
  • 1388 Answers

SOURCE: Can someone help me with threading my Elna Serger?

A model number would be helpful
Follow the Colour Threading guide on the machine....
Basically......Start with the Loopers (from Right side) finish with needles (Left side)

So....4,3,2,1 in sequence .....1 is first then work to the left

Posted on Oct 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I thread the elna 344D overlocker the picture doesn't explain where the cotton goes


Search for:

Make Model threading

Even if it is not your specific model, most overlockers (especially within the same brand and like models) will thread the same or very similarly. Just be sure to ALWAYS RAISE the presser foot when threading. Also, thread each thread IN THE ORDER specified. Threading the threads out of order will cause havoc AND intense frustration!

Overview Elna Serger Overlock Sewing Machine FREE SAMPLE

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&uact=8&ved=0ahUKEwjXx7O89-zSAhVir1QKHQenCVkQFggkMAE&url=http%3A%2F%2Fwww.elnausa.com%2Fen-us%2Fdownloads.php%3Ftype%3D3%26id%3D114&usg=AFQjCNH7ZupnKmzXfRfG8nvInQllxRjg0Q

Mar 23, 2017 | Elna Sewing Machines

1 Answer

Can someone help me with threading my Elna Serger?


A model number would be helpful
Follow the Colour Threading guide on the machine....
Basically......Start with the Loopers (from Right side) finish with needles (Left side)

So....4,3,2,1 in sequence .....1 is first then work to the left

Oct 19, 2011 | Sewing Machines

1 Answer

How do you thread a elna L-5 sewing machine


I found two sites with a manual for this model. Both are around $15.00 - sew4less and sewusa.

If you open the front of the serger, there should be a threading guide printed on the serger or on the inside of the door.

Raise the thread antenna to it's highest position.

Set the tensions to zero and raise the presser foot.

Turn the handwheel until the loopers are at their highest position - the handwheel may have a mark on it that aligns with one on the side of the serger to help with this.

Starting at the right, thread the upper looper first.

After threading, reset the tensions back to approximately mid-range.

Lower the presser foot and stitch a chain of thread to make sure the serger is stitching as it should.

May 01, 2010 | Sewing Machines

1 Answer

I need a manuel for an Elna 411 serger


I could not find a manual for this model, but did find a fairly universal guide at Singer - http://www.singerco.com/pdf/14SH654_threading.pdf

A very good book for sergers from threading to maintenance is Nancy Zieman's Serge With Confidence.

Raise the antenna to it's highest position.

Raise the presser foot and set the tensions (if not auto tension) to zero.

Thread in the order indicated in the download or on the front of the serger/inside serger door.

Mar 19, 2010 | Elna Sewing Machines

2 Answers

Elna serger 925 presser foot lift lever broke off.


Here are 2 dillers that will repair it for you.

Sew Pros Inc 393 Broadway
El Cajon, CA 92021 (619) 442-3100 4.61 mi Burdick's Chula Vista Sew 278 Third Ave
Chula Vista, CA 91910 (619) 422-5325 10.56 mi


Good luck and please rate

Sep 16, 2009 | Elna Sewing Machines

1 Answer

Replacing needle on Elna Pro 905 DCX serger


Try and loosen the screw, and use a magnet to pullout the broken piece. It likely slightly bent in there so you may need a pair of tweezers as well
Good luck!






Jan 23, 2009 | Sewing Machines

1 Answer

Threading elna lock pro 4 DE green knob


My lower looper thread keep breaking, what is the problem.

Feb 17, 2008 | Baby Lock Eclipse Serger

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

155 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Chris Wetmore

Level 2 Expert

185 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...