Question about Garden

2 Answers

How can i tell how old my remington model 1100 is

I am trying to find a recoil pad for it that fits

Posted by on


2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 5 Answers

Theres a couple nice ajustable butt pads on ebay biseley ones

Posted on Jul 30, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 7,482 Answers

Hi tommyw57
You will never find a recoil pad made just for the 1100 unless you buy one from a gun show that came off of an 1100.
Go to Walmart and pickup the recoil pad of your choice, install it on your 1100 and draw the outline of the stock on the oversized recoil pad.
Remove the pad from the gun and on a grinder, reduce the size of the recoil pad down to the size that fits the stock of the 1100 that you drew on the oversized recoil pad.
Please take time to rate me

Posted on Nov 02, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How can I get ahold of a remmington1100 Manuel

Do you mean a Remington 1100 shotgun? Remington has the owner's manual on the product page: . The direct link to the manual is currently . Note: the manual covers several models.

I hope this helps.

Cindy Wells

Dec 12, 2017 | Computers & Internet

1 Answer

How do I remove the centrifugal clutch so I can access to broken recoil on a Remington rm2599 gas pole saw

A lawnmower flywheel puller is the cheapest and easiest way to get it off, but if for some reason it doesn't fit, a two or three prong puller is the best way to remove the clutch. You can usually borrow one at your local chain auto parts store. The lawnmower puller threads into the bolt hole and the nut on the shaft is tightened until the clutch pops loose. I personally prefer this method since there is no chance of distorting the clutch housing.

Nov 03, 2014 | Garden

1 Answer

How to remove/replace the recoil pad from a Remington 700 CDL refile?

There are two slits in the pad over the two mounting screws. Most are phillips head screws so put a dab of grease on the screwdriver and simply take it off.

Oct 17, 2014 | Remington 700 CDL, .243 Win

1 Answer

The link keeps falling out causing feeding problems. Sometimes it will shoot all three shots sometime only two and on occasion only one shot. Usuall at that time the bolt locks up due to the link causing...

If you're talking about the bolt link, it means one of the two legs has jumped out of the dimple in the link plunger. Sometimes they jump out because its broken.

Oct 22, 2013 | Remington Model 1100/11-87 12Ga. ShurShot...

2 Answers

What year was my Remington 870 shotgun made? Serial number: D715856U

How can I tell how old my Remington firearm is? If you will call and provide us the serial number and model number we can determine the approximate age of your firearm.

Serial numbers were not required until 1968. For models without a serial number, we may be able to determine the age by the 2-3 letters that are stamped on the barrel.

Contact us through our Help Center by email or call us at 800-243-9700 Mon-Fri 9-5 EST.

Feb 14, 2010 | Remington Shotgun Mount 12Ga Lh, B Square...

2 Answers

Remington 1100 12 gage won't load a shell from the magazine

Are you shooting very light load?
Have you tried different ammo?

Light loads may not produce enough energy to work the action properly.

If different ammo doesn't help, make sure the two holes inside the barrel ring are clean and gas from the barrel can pass through. Next I would check the o-ring for cracks. If you shoot lots of shells (competition clays) the recoil springs inside the stock or over the magazine tube may have become weak and need replacing.

Jan 12, 2009 | Remington Shotgun Mount 12Ga Lh, B Square...

Not finding what you are looking for?
Garden Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2478 Answers


Level 3 Expert

630 Answers

john h

Level 3 Expert

12744 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides