It won't type only lights on is the end page and its flashing with the ribbon this is not in my manual what should I do

Try poping off the shift and shift lock key tops to see if the springsb are damaged or sticking down.

DickyO

You probably have the speed reminder set to 45mph. It chimes & flashes to let you know you are speeding. It will tell you how to adjust it in your owners manual. If you don't like it set it high eg: 100mph. then it won't happen.

this happened to me, it needs charging make sure the lead has the blackberry symbol facing up....

Put a multi part form in and type if it prints on the copies the ribbon is either bad, not lifting, installed wrong, not feeding or just old

either the ribbon is bad or the ribbon feed mechanism needs repair

Page 67 of the manual address this.

I don't understand these questions

Any dash light you get is a Vehicle System
Malfunction ( no owners manual)

They have been with us for 30 years now,
still hundreds of questions a night

Study OBD2 Systems on the internet

All check lights need immediate attention

Check for Codes
Diagnose
Repair

Do so in a few days of any light on dash,they
won't go away & won't pass inspection & eventually
will end in costly repairs

Check page 10 in the manual at this link:
http://h10032.www1.hp.com/ctg/Manual/bpd09384.pdf

If the "Resume" & "Power" buttons & lights are the ones you refer to, then here is a page explaining how to resolve this issue:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=71895&prodTypeId=18972&prodSeriesId=71895&objectID=c00681585