Question about Python Vehicle Parts & Accessories

1 Answer

Python 476p my remote will not engage the starter....everything else operates correctly

Posted by Anonymous on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

May depend how it was programmed. My Python 476P was setup with Lock and Unlock pressed to get it to remote start. Then, get in the vehicle, put the key in the "on" position and press lock / unlock to get it to end the remote start cycle. Then Drive off ...

I got a second remote, followed some directions via YouTube to program. Key in the on position, then hit the valet button once, then press and hold. One chirp, hit lock on remote. Let go of valet button . Press, then press and hold, two chirps. Hit unlock. Continue for 3 (aux) and 4 (panic). End result was Lock would also unlock. Unlock did nothing. And Aux started the remote start sequence.

Having bought a vehicle used, then no manual made this a bit difficult. I will continue to test alternate programming to try to match the original remote so accidentally firing up the rig doesn't happen. My suspicion is I have to maybe do Lock, Aux, Lock/Unlock, panic instead. Good luck.

Posted on Dec 03, 2013

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 53 Answers

SOURCE: I bought a 2002 jeep

the lock button should arm the alarm, the unlock should dis arm the alarm. aux on this vehicle should not do anything and the red button should set off the alarm for panic button. You cang et a copy of the owners manual at Directed Electronics website

Posted on Jul 14, 2009

str8gooods
  • 13 Answers

SOURCE: one of my remotes will no longer operate my Python

This is a common problem on these and the equivalent viper models. We sent all our units back to viper and they have now re-released the units. We had installed these units into customers vehicles and about 50% had the same issue your having. Even after they were reprogrammed, many returned with the problem again. My advice is to contact python and have the unit replaced.

Posted on Mar 08, 2010

  • 132 Answers

SOURCE: python car starter 951

unlock car via remote Push and hold F button for about 8 seconds until it says setup remote on the screen Use the aux and remote start buttons to scroll to CLOCK and then use the F button to access menu.

Posted on Apr 06, 2010

slick42371
  • 42 Answers

SOURCE: Python 1600 XP Remote Starter my

You have the 24 hr timer on and you just have to press the lock and remote start buttons at the same time.

Posted on Feb 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Python car starter


Can you remove the python box without removing the wiring? That'd be a pretty definitive way of determining if the relays inside the python box are bad. On another note, this sounds like an ignition switch issue, the python box could just be coincidental.

Sorry, not much help... but see if you can eliminate the python box. That's the diagnostic process with electrical is to remove possible causes and record the results. Next, you might consider unplugging the wire harness from the ignition switch... or remove the wire harness that leads up the steering column.

Oct 16, 2013 | Vehicle Parts & Accessories

1 Answer

How can I find a users guide for a Python 473P remote starter?


473P is the part number of the remote. 473P is the original remote for a Python1200XP alarm. I have the users guide.

Aug 14, 2012 | 473P 3-Button TX Remote

1 Answer

I recently installed a python 872 on my 2002 maxima. Now everytime i use the remote start and open the trunk the car shuts off and restarts in about 10 seconds. I had other dei alarms and never had that...


It's possible that the installer has the engine monitoring option programmed for voltage and, the unit sees a drop in voltage when operating the trunk...causing the remote starter to shut down. If so, try programming the unit for tachless instead or, hook up the tach wire.

Jun 10, 2011 | 872 Responder LE Security Remote Start

1 Answer

Python 1600 XP Remote Starter my car starts at 1 pm daily automatically. How do I remove this timer on this remote starter


You have the 24 hr timer on and you just have to press the lock and remote start buttons at the same time.

Dec 23, 2010 | 1600XP Security/Remote Start System

1 Answer

Python ce0890 FCC ID EZSDET474P RPN 473P 266 CODES. How do i reset this devise? The battery is good


While our Dodge ram truck sits - the horn starts blowing. We think it has to do with the remote and the security. We have the Python CE0890 remote starter - it is a few years old.

Dec 06, 2010 | 426P 460HP Security System - 426P

1 Answer

One of my remotes will no longer operate my Python


This is a common problem on these and the equivalent viper models. We sent all our units back to viper and they have now re-released the units. We had installed these units into customers vehicles and about 50% had the same issue your having. Even after they were reprogrammed, many returned with the problem again. My advice is to contact python and have the unit replaced.

Mar 08, 2010 | 1401 Remote Start System With Dual...

1 Answer

I bought a 2002 jeep wrangler with a Python vehicle security system, the owners guid was not in the car and I am wondering what all this remote will do. This is all I know about the remote: FCC ID:...


the lock button should arm the alarm, the unlock should dis arm the alarm. aux on this vehicle should not do anything and the red button should set off the alarm for panic button. You cang et a copy of the owners manual at Directed Electronics website

May 04, 2009 | Vehicle Parts & Accessories

Not finding what you are looking for?
Vehicle Parts & Accessories Logo

Related Topics:

359 people viewed this question

Ask a Question

Usually answered in minutes!

Top Python Vehicle Parts & Accessories Experts

rjivaro

Level 2 Expert

153 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

AzVip

Level 2 Expert

114 Answers

Are you a Python Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...