Question about Kitchen Appliances - Others

Open Question

I have a JMB breadmaker model no. DBM 200H-1, unfortunately the numeric display does not work.

This problem occured as soon as i received the breadmaker, i have had the machine for a few yrs now but recently decided to persevere with it but have guess the times.????

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
ginko
  • 19396 Answers

SOURCE: I have a Regal KitchenPro

Hi.

Here is Regal parts website. Kitchen Pro is not listed among the product lines.

I suggest instead contacting Breadmaker Guru clicking here and asking if they have the part in stock.

Parts for this appliance are very difficult to find, here a forum on the same problem. I suggest also checking Ebay.

Posted on Aug 30, 2010

Ad
  • 1 Answer

SOURCE: need manual for jmb hb250

Using the JMB HB-250 Bread Maker
Those of you who have acquired the HB-250 bread-maker without a manual may require some advice on how to get started. I do not have a user or service manual but have used this machine for some time.

How to load the tin.
For this bread-maker to work flawlessly it is best to load the ingredients in the following order: A basic bread recipe is included as an example:

First Liquids. 300ml water
Second Flour. If you aerate it so much the better. 500grams
Third Ingredients in each corner:
salt / butter / milk powder (if desired) / sugar.
1 tps salt / 15 grms butter / 2 tps mik powder / 1.1/2 tps sugar
Fourth Yeast. Make an indentation in the centre of the flour and tip in the
contents of the sachet. Sachet is 7 grms.

You are ready to go. You can get loads of recipes by trawling the web.

Operation.
This is a very simple machine and it gets the job done without complications. It is what it is without all the bells and whistles. You must observe the cooking times because it is no good starting a whole-wheat loaf at 3:0pm hoping it will be ready for 5:0pm
There are six selections to choose from: Basic, W.Wheat, Sweet, French, Cake, and Dough. The approximate time cycles for each of the selections is as follows:

  • Basic 190min 3h 10m
  • W.Wheat 230min 3h 50m
  • Sweet 200min 3h 20m
  • French 210min 3h 30m
  • Cake 85min 1h 25m
  • Dough 75min 1h 15m
  1. Plug the unit into the wall socket and switch on. A long beep is heard and the green indicator above the ON/OFF switch is illuminated.
  2. Using the Select button press and choose the method for your bread. A green indicator will show you which selection you have made.
  3. Press the On/Off button to start the bread-maker. The chosen selection indicator will start flashing
Note: Once started the machine will continue to the end of the cycle.

Stopping the Bread-maker. To switch OFF or reset the operation press and hold the ON/OFF button until the machine resets and the selection indicator stop flashing. The machine is now in its OFF position. If required you can re-select a program or just switch off.

W. Wheat Selection - Using this selection the machine appears to do nothing when switched on. It will take 30 minutes before you hear the machine in operation. Do not assume it is not working it is. The heater slowly increases the working temperature required by the ingredients.

Once cooking starts - don't be tempted to lift the lid to see what is happening. Buy a high-powered LED torch and view the workings through the window on the top of the machine. Opening the lid destroys the internal temperature; this will cause your bread to deflate.

Adding extras: If you want to add fruits or olives etc to your loaf; wait until 8 beeps is heard then add. This will be approximately half way through the proving cycle

End of cycle: The Morse code for VICTORY (as 3 sets of dit dit dit dah.) is heard.

Posted on Nov 22, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the difference between GPON B+ and C+ GPON transceiver?


B+ Module C+ Module Type One-fiber bi-directional optical module, class B+ One-fiber bi-directional optical module, class C+ Operating Wavelength Tx: 1490 nm
Rx: 1310 nm Tx: 1490 nm
Rx: 1310 nm Encapsulation Type SFP SFP Port Rate Tx: 2.49 Gbit/s
Rx: 1.24 Gbit/s Tx: 2.49 Gbit/s
Rx: 1.24 Gbit/s Minimum Output Optical Power 1.50 dBm 3.00 dBm Maximum Output Optical Power 5.00 dBm 7.00 dBm Maximum Receiver Sensitivity -28.00 dBm -32.00 dBm Optical Connector Type SC/PC SC/PC Optical Fiber Type Single-mode Single-mode Reach 20.00 km 20.00 km Overload Optical Power -8.0 dBm -12.0 dBm Extinction Ratio Huawei GPBD Board Thunder link com

Nov 02, 2016 | Computers & Internet

1 Answer

My bread machice will not start.


Addressing Power-up/Start-up Issues:


1. Unplug the breadmaker.

2. Confirm the power source your accessing is live using a blender, toaster, etc.

3. Plug the breadmaker in.

4. Confirm the breadmaker is receiving power:


    1. Some models have a built-in off/on switch. Turn it to the ON position.
    2. Some models make an audible tone when plugged in.
    3. Some models have a colored light and/or a lighted display screen that lights up.
    4. Some models require you press the Select button down until the unit powers up.
    5. Some models require you press the Start button down until the unit powers up.


3. Were you unable to confirm that your breadmaker is receiving power? Sorry to hear that. Attempt to have the breadmaker serviced by a small appliance repair facility or simply discard it.


4. Were you able to confirm that your breadmaker is receiving power? Fantastic! Now reset the breadmaker by pressing the Start button down until you notice a visible and/or audible confirmation, usually within 5 to 10 seconds.


That should fix it. Hope this helps!

Jun 24, 2011 | Sunbeam 5891 Bread Maker

1 Answer

I have a Breadman TR875 breadmaker. It will not do anything when I hit start. I've tried to unplug it, but didn't help.


I believe for this perticular model to power-up, you must press the Select button first to select a mode, then press the Start button.

Here's more on the subject...

Addressing Power-up/Start-up Issues:


1. Unplug the breadmaker.

2. Confirm the power source your accessing is live using a blender, toaster, etc.

3. Plug the breadmaker in.

4. Confirm the breadmaker is receiving power:


    1. Some models have a built-in off/on switch. Turn it to the ON position.
    2. Some models make an audible tone when plugged in.
    3. Some models have a colored light and/or a lighted display screen that lights up.
    4. Some models require you press the Select button down until the unit powers up.
    5. Some models require you press the Start button down until the unit powers up.
    6. Some models require you press the Select button first to select a mode, then press the Start button.


3. No, you were not able to confirm that your breadmaker is receiving power? Sorry to hear that. Attempt to have the breadmaker serviced by a small appliance repair facility or discard it.


4. Yes, you have confirmed that your breadmaker is receiving power? Fantastic! Now reset the breadmaker by pressing down on the Start button until you notice a visible and/or audible confirmation, usually within 5 to 10 seconds. Note: It bears mentioning again at this point that some models require you press the Select button first to select a mode, then press the Start button.

Jun 20, 2011 | Breadman Kitchen Appliances - Others

1 Answer

It has stopped-no current at all. Plugs seem to be OK.


Addressing Power-up/Start-up Issues:


1. Unplug the breadmaker.

2. Confirm the power source you're accessing is live using a blender, toaster, etc.

3. Plug the breadmaker in.

4. Confirm the breadmaker is receiving power:


    1. Some models have a built-in off/on switch. Turn it to the ON position.
    2. Some models make an audible tone when plugged in.
    3. Some models have a colored light and/or a lighted display screen that lights up.
    4. Some models require you press the Select button down until the unit powers up.
    5. Some models require you press the Start button down until the unit powers up.
    6. Some models require you press the Select button first to select a mode, then press the Start button.


3. No, you were not able to confirm that your breadmaker is receiving power? Sorry to hear that. Attempt to have the breadmaker serviced by a small appliance repair facility or simply discard it.


4. Yes, you have confirmed that your breadmaker is receiving power? Fantastic! Now reboot the breadmaker's electronics by pressing down continuously on the Start button until you notice a visible and/or audible confirmation, usually within 5 to 10 seconds. Beware: Some models require you press the Select button first to select a mode, then press and hold the Start button to reboot the system.

That should fix it. Hope this helps!

Special Note: Often the + and - Timer Delay buttons are pressed by mistake, delaying Start by up to 12 hours. If you suspect the Timer Delay feature has been engaged accidentally, you'll need to reboot the breadmaker's electronics. You can do this by pressing down on the Start button continuously until you notice a visible and/or audible confirmation, usually within 5 to 10 seconds. Beware: Some models require you press the Select button first to select a mode, then press and hold the Start button to reboot the system.

Jun 16, 2011 | Breadman Kitchen Appliances - Others

1 Answer

I have an Oster Bread Machine model 5839. The display and timer work but nothing else does.


Addressing Power-up/Start-up Issues:


1. Unplug the breadmaker.

2. Confirm the power source you're accessing is live using a blender, toaster, etc.

3. Plug the breadmaker in.

4. Confirm the breadmaker is receiving power:


    1. Some models have a built-in off/on switch. Turn it to the ON position.
    2. Some models make an audible tone when plugged in.
    3. Some models have a colored light and/or a lighted display screen that lights up.
    4. Some models require you press the Select button down until the unit powers up.
    5. Some models require you press the Start button down until the unit powers up.
    6. Some models require you press the Select button first to select a mode, then press the Start button.


3. No, you were not able to confirm that your breadmaker is receiving power? Sorry to hear that. Attempt to have the breadmaker serviced by a small appliance repair facility or simply discard it.


4. Yes, you have confirmed that your breadmaker is receiving power? Fantastic! Now reboot the breadmaker's electronics by pressing down continuously on the Start button until you notice a visible and/or audible confirmation, usually within 5 to 10 seconds. Beware: Some models require you press the Select button first to select a mode, then press and hold the Start button to reboot the system.

Often the + and - Timer Delay buttons are pressed by mistake, delaying Start by up to 12 hours. If you suspect the Timer Delay feature has been engaged accidentally, you'll need to reboot the breadmaker's electronics. You can do this by pressing down on the Start button continuously until you notice a visible and/or audible confirmation, usually within 5 to 10 seconds. Beware: Some models require you press the Select button first to select a mode, then press and hold the Start button to reboot the system.


All breadmaker use a belt and pulley system. If your breadmaker powers-up but the mixer won't turn when it's supposed to, your belt is probably broken. You

Jun 15, 2011 | Oster Kitchen Appliances - Others

1 Answer

I have a convection bread maker. I made one loaf of bread tonight and i unplugged the machine. 30 minutes later, I tried to make a second loaf ant the menu select wouldn't work but the start and mix in...


Cuisinart has many different bread machine models. Next time you ask a question, please include a model number. Thank you.

Here's my generic best advice for you dear:

Addressing Power-up/Start-up Issues:


1. Unplug the breadmaker.

2. Confirm the power source you're accessing is live using a blender, toaster, etc.

3. Plug the breadmaker in.

4. Confirm the breadmaker is receiving power:


    1. Some models have a built-in off/on toggle power switch. Turn it to the ON position.
    2. Some models confirm power by making and audible tone when plugged in.
    3. Some models have a colored light and/or a lighted display screen that lights up.
    4. Some models require you press and hold the Select button down until the unit powers up.
    5. Some models require you press and hold the Start button down until the unit powers up.
    6. Some models require you select a mode first by pressing the Select button.
    7. Some models require you press and hold the Stop button down until the unit powers up.


Were you able to confirm that your breadmaker is receiving power?


No. Sorry to hear that. Attempt to have the breadmaker serviced by a small appliance repair facility or simply discard it.


Yes, Fantastic! Now reboot the breadmaker's electronics by pressing and holding down the Stop button down until you receive a visible and/or audible confirmation, usually within 1 to 5 seconds. Note: Some models require you press and hold the Start button. Others require you press and hold the Select button.

Often the + and - Timer Delay buttons are pressed by mistake, delaying Start by up to 12 hours. If you suspect the Timer Delay feature has been engaged accidentally, you'll need to reboot the breadmaker's electronics.


All breadmaker use a belt and pulley system. If your breadmaker powers-up but the mixer won't turn when it's supposed to, your belt is probably broken. You'll need to disassemble the breadmaker to visually confirm.

Jun 13, 2011 | Cuisinart Kitchen Appliances - Others

1 Answer

Breadman Pro TR875 is stuck & will not start up to knead the dough. Timer is hi-lighted & shouldn't be. No pushing of any buttons will not clear & start over


Addressing Power-up/Start-up Issues:


  1. Unplug the breadmaker.
  2. Confirm the power source you're drawing from is live using a blender, toaster, etc.
  3. Plug the breadmaker in, unplug it, then plug it in a second time.


    1. Some models have a built-in off/on toggle power switch. Turn it to the ON position.
    2. Some models confirm power by making and audible tone when plugged in.
    3. Some models have a colored light and/or a lighted display screen that lights up.
    4. Some models require you press down on the Stop button until the unit powers up.

E. Some models require you press down on the Start button until the unit powers up.

F. Some models require you press down on the Select button until the unit powers up.

G. Some models require you press the Select button first before pressing the Start button.


In the end, were you able to confirm that your breadmaker is receiving power?


No. Sorry to hear that. Have the breadmaker serviced by a small appliance repair shop or simply discard it.


Yes. Fantastic! Now reboot the breadmaker's electronics by pressing down on the Stop button until you receive a visible and/or audible confirmation, usually within 1 to 5 seconds. Note: Some models require you press down on the Start button instead. And yet a few others require you press down on the Select button instead.

Often the + and - Delay Timer buttons are pressed by mistake, delaying Start by up to 12 hours. If you suspect this handy feature has been engaged accidentally, you'll need to reboot the breadmaker's electronics.


Note: All breadmakers use a belt and pulley system. If your breadmaker powers-up but the mixer won't turn during the kneading cycles, your timing belt is probably broken. You'll need to disassemble the breadmaker to visually confirm. The belt and pulley assemblies are located at the bottom of your breadmaker.


Did this answer help? Hope so. Please rate it as soon as you can. Thank you. r53w6t

Jun 07, 2011 | Breadman TR900S Bread Maker

1 Answer

West Bend Bread Maker model 41056 does not start. When machine is plugged in, LED displays a time but buttons do not work and red light does not go on. (Pan was in machine and anchored.)


Power-Up/Start-Up Issues:


  1. Unplug the breadmaker.
  2. Confirm the power source you're drawing from is live using a blender, toaster, etc.
  3. Plug the breadmaker in, unplug it, then plug it in a second time.


    1. Some models have a built-in off/on toggle power switch. Be sure it's turned on.
    2. Most models confirm power by making an audible beep when plugged in.
    3. Most models have a colored light and/or a lighted display screen that lights up.
    4. Most models require you press down on the Stop button until the unit powers up.

E. Some models require you press down on the Start button until the unit powers up.

F. Some models require you press down on the Select button until the unit powers up.

G. Many models require you select a baking mode by pressing the Select button before the pressing the Start button.


Q: In the end, were you able to confirm your breadmaker is receiving power?


No. Sorry to hear that. Have it serviced by a small appliance repair shop or simply discard it.


Yes. Fantastic! Now reboot the electronics by pressing down on the Stop button for 1 to 5 seconds. Note: A few models require you press down on the Start button instead. And even fewer require you press down on the Select button instead.

Often the + and - Delay Timer buttons are pressed by mistake, delaying Start by up to 12 hours. If you suspect this handy feature has been engaged accidentally, you'll need to reboot the breadmaker's electronics. See reboot directions above.


Note: All breadmakers use a belt and pulley system. If your breadmaker powers-up but the mixer won't turn during the kneading cycles, your timing belt is probably broken. You'll need to disassemble the breadmaker to visually confirm. The belt and pulley assemblies are located at the bottom of your breadmaker.


Did this answer help? Hope so. Please rate it as soon as you can. Thank you. 465ygbea

Jun 07, 2011 | West Bend 41053 Bread & Dough Maker

1 Answer

1) Contacts details entry - how do you enter uk postal codes which are alpha numeric, when the zip code field only permits numerics via a pop up entry number pad, other tah entering in the city field, eg...


1. In your Input method, under Settings>Locale and Text, you probably are using Samsung Keypad.
- There is a 4th column on the numeric keypad. Press the [?#+] key until it displays the alphabet characters.

2. Unfortunately, at the moment, there are only two available display options - Firstname and Lastname.

Hope this helps.

May 06, 2011 | Samsung Galaxy Tab Tablet PC

1 Answer

What is the range of blootooth in meter.


The range of a Bluetooth device depends on the Radio Class. I am not sure what the Class on a BlackBerry Curve is, but here are the options:

Class Maximum Permitted Power mW (dBm) Range (approximate)
Class 1 100 mW (20 dBm) ~100 meters
Class 2 2.5 mW (4 dBm) ~10 meters
Class 3 1 mW (0 dBm) ~1 meter

Jan 22, 2009 | RIM BlackBerry Curve 8310 Smartphone

Not finding what you are looking for?
Kitchen Appliances - Others Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Appliances - Others Experts

Angel Joseph Jr.
Angel Joseph Jr.

Level 2 Expert

683 Answers

kakima

Level 3 Expert

102366 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...