LOST MANUAL I just need to know what channel do I put my TV on so that I can use the DVD player I have the GPX D1816

I check GPX D1816 - DVD player Specifications but didn't see an Ethernet or wireless connection(so you can stream down video). If it did then you can use RCA/HDMI cable to connect this to a TV.

Hi,
You are trying to work out how to watch a DVD movie on your TV
The DVD should be connected to your TV with Audio Video cables.
And it will most likely be connected to AV1 on your TV
The easiest way to find out would be to

• Put a DVD in the Player and press play
• Now the TV is probably in channel mode, so find the button on the TV remote that says TV/AV
• now press this button TV/AV and it will scroll from TV channel to AV1, AV2 etc until you see the DVD picture.

I hope this helps you.
If so please leave a vote or comment.

Have a great day
MobileJB

yup

if you have a picture on the tv from normal channels and/or cable, then i would suspect the scart lead may have a bent pin at one end or both or is not inserted fully.

Hello, Please get the code here : www.dvdoverseas.com/dvd.htm
www.regionfreedvd.net/

Regards, Jay__98uhy

This is very simple
First on the back of your dvd player there should be the holes with the same colors as the cable you have, yellow (video in) in the yellow, red (left audio) in the red e.t.c.
Then either on the side or the back of your tv there should be the same sorta thing, depends if you have a HD TV or a regular freeview/analog tv. With hd there should be green blue red white and yellow, just the same as the DVD player, plug the cables into the right colors as i said,
Same goes for the regular TV, just do exactly the same as you have done with the dvd player,
Switch your channel to dvi or av1/2/3 and your dvd player should be working
Regards

No Theres Not You'll Need The Brand Check Inside The Battery Compartment Look For Any Numbers Or Anything That Could Be Helpful.

I figured out the code, it's printed incorrectly many places.

1 - Turn on DVD Player
2 - Press Open/Close button - open tray
3 - Press "8888"
4 - Put a DVD in the tray (from outside your region)
5 - Press Open/Close button - close tray
6 - Voila! It plays!

Works on mine!

Easy, just match up color codes from tv to dvd player. If you only have red, yellow and white, they should coincide wih the TV as some TV's dont have the 5 color jacks R/W/G/B/Y inputs. If they do, use the colorstream or "comp" input on the TV

I need to program a universal remote with my GPX DVD player
does anyone know the 3 digit code?