Question about Samsung Phone PDCSLCD12B

1 Answer

Help! Trying to change the time on my office phone and all i can find in the user guide is how to set an alarm, nothing bout how to change the time and date. any suggestions???

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers
Re: help!

CHANGING TELEPHONE SYSTEM TIME FROM EXT. 201 1.Press TRANSFER 800 4321 2.Press 1 3.Press SPEAKER 4.Press 505 5.Enter time as WMMDDYY:HHMM (W=day of week, 0=Sunday, 6=Saturday) 6.Press TRANSFER to store and exit 7.Lift handset to make sure to exit program mode.

Posted on May 31, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

Can't set date & time for Panasonic cordless phone GX-2711SAM

Still error ,handset registration fails although keep on trying step 1&2 in my kx-tg2360jxs panasonic cordless phone , what shall i do ? Shall i change handset batteries ? Really i got bored , is their any one facing my problem ? Help me please

Jan 05, 2014 | British Telecom Synergy 2110 Cordless...

2 Answers

Need an installation and setup guide for tmc soho m4810.

you have to assign an ext to the phone.Press Program and extension button to assign it to an extension.
all phones have to have different assigned ext (obviously)...

To cancel stored extension(to change) Press program, press PAGE twice, press mute.

I need the users guide!!! have quite a few install and set up guides - I just need the users guide!!! need to change time and other things!!!

Please help...will trade...

Jun 30, 2009 | TMC M4810 NON-KSU Corded Telephone

1 Answer

Samsung prostar 816 plus system ringing problem

sounds like your having a couple of problems at the same time. the lines only ringing at station 1 is the default setting of the system my guess is that the time and date are also way off if thats the case.
To change the ringing on a prostar 816 you first need to be at a display set (doesn't matter what the extension number is).
with the handset down enter #20 the screen should say MMC DISABLED
1) enter in 1 2 3 4 1 # (that enables programming)
2) enter in #62 the screen should say day ring assn
3) press the line you wish to program
4) press the buttons for the extensions that you wish to ring (the ones in the right next to the handset)
5) press # when finished with the line
6) repeat steps 2 through 5 for the remainder of the lines you wish to change
press #when finished.

next, the problem with the cordless not working has to do with the port programming, in default it assigns all ports as multiline sets.
To assign a SLT(single line telephone) port to the system while still in program mode dial #38 the screen should say slt dial type and then 16 0's.
0 = keyset 1=slt set
enter in all 16 digits followed by the # i.e.if your cordless is on port 7 it would look like 0000001000000000 #
lastly the phone that can no lnger recieve calls sounds like the do not disturb or DND has been pressed to stop the alarm from ringing. press the mute/dnd button (light should be off). to cancel an alarm press the ALM/SD button twice and then the hold button.
hope that helps out.

Mar 05, 2009 | Samsung Prostar 816 Phone

1 Answer

Phone will not ring

It's RINGING now! I followed the Set Programming instruction in our manual. It's in Configuration 3-21. It's a very old old Operator guide.
I am trying to find it online. In the mean time you can use the M7208 Phone Adminitration Overlay over the keys and program your phone by pressing Feature **266344
Here is a link to the overlay
Good Luck.

Nov 19, 2008 | NorStar M7208 Corded Phone

1 Answer

Norstar Phone System - How do I change the time?

press feature **time
enter the time.

Press Feature **date
enter the date

Nov 05, 2007 | NorStar M7324 Telephone

1 Answer

How do I change the time on Avanti 3020 telephone?

For the Avanti 3015 phone you have to
  1. push the feature button
  2. enter the number 82
  3. enter the time as follows
  4. Enter four digits for the current time (00 to 23 for hours and 00 to 59 for minutes).
    Enter two digits for the date (01-31)
    Enter two digits for the month (01-12)
    Enter two digits for the year (00-99)
    - The display shows the digits as you enter them - Press {SAVE}
    - The new time and date are displayed

Sep 28, 2007 | Phones

1 Answer

AT&T cordless/answering machine: 4695

From the user manual, you need to use the MENU, CHANGE and TIME/SET keys Set the Clock 1 With answering system on, press MENU until the system announces,?Change clock.? 2 Press CHANGE until the system announces the correct day, then press TIME/SET. 3 Press CHANGE until the system announces the correct hour, then press TIME/SET. 4 Press CHANGE until the system announces the correct minutes, then press TIME/SET. The system announces the current clock setting. 5 Press an MBOX/STOP button to exit programming. Hope this helps

Aug 06, 2007 | AT&T 1480 Phone

Not finding what you are looking for?
Phones Logo

Related Topics:

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Phones Experts

Yoav Shilon
Yoav Shilon

Level 2 Expert

101 Answers


Level 1 Expert

23 Answers

Lawrence Oravetz

Level 3 Expert

7053 Answers

Are you a Samsung Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides