Question about Frigidaire ATF6000ES Front Load Washer

1 Answer

My Frigidaire affinity washer leaks water into the washer stand. Whenever I open the drawer after washing a couple of loads there's water in the drawer.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

That's what I thought was wrong with mine to I had 1.75 in change and a piece of a wash clothe in the screen. I toke all that out and it still leaked. Took it apart further and found a piece of the weight that is made out of cement broke of and rubbed through the drum. That sounds like junk to me!!!

Posted on Nov 06, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Frigidaire Affinity Washer beeps & won't spin

The drain filter is clogged. I had the same problem. There is a filter inside the "drain boot" (black) that comes from the drum to the drain pump. Mine was completely clogged with money, lint, etc..

Posted on Oct 19, 2008

  • 156 Answers

SOURCE: leaking frigidaire top load washer

yes there a seal under the tub ring make sure tub ring has all the snaps in place

Posted on Mar 03, 2008

onthejob5130
  • 640 Answers

SOURCE: Frigidaire Affinity Atf7000e...Does not load up water.

clean your inlet screen...onthejob...take hose off and take screens out of inlet water vavle and clean then replace..onthejob

Posted on Jan 31, 2009

  • 2 Answers

SOURCE: My Affinity Front load washer, Model #ATF7000ES1

I am having this same exact issue, have you figured out what the was?

Posted on Sep 11, 2010

  • 396 Answers

SOURCE: I'm having a problem with my frigidaire front

If water remains in the drum the unit will not go into the final spin. There may be a couple of reasons which I have experienced resulting in your problem. If water remains in the tub the unit will not go into the high speed spin.

1.) A coin or other foreign object is blocking the drain hose. Check the drain hose for foreign objects impeding the exit of the water. Shake the hose and listen for coins or a small object this unit will pass items through the pump into the hose causing blockage.

2.) The Drain hose is not raised above the machine outlet to create a siphon effect. See your manual for proper hose positioning. The hose needs to have a loop in it to work correctly.

3.) The pump is a third possibility which you should hear the impeller spinning during the drain cycle. There is a coin catch after the diaphragm of the pump that looks like a rubber boot that should be inspected for objects if you remove the pump. The pump is about $60.00 and is accessible after removing the front panel under the door. It is easy access from the front and the hose clamps will be the most difficult problem. I have a ratcheting hose clamp tool designed for this type of clamp but channel lock pliers will work.

Posted on Jan 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error code DDo ON A FRIDGEDAIRE FRONT LOAD WASHER


Hello geraldinerid - Typically DDO indicates that the washer has detected a problem with the dispenser drawer. Either the drawer is open and will not close properly or a further diagnosis is recommended to have a professional check the reed switch.

Apr 12, 2013 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

I have a frigidaire affinity front load washer and it's leaking out the back at the top right corner. Do you know what could be causing this?


Hi ajdean01 - I see that your tub appears to be leaking. Here are a few troubleshooting tips that may help you get to the root cause:



· First, be sure that your tub is not overloaded. Sometimes when overfilled, water can and will slosh outside of the unit.

· If the tub is not overfilled, check your hoses and other connections. Like most laundry units, there is always some vibration associated with the functionality of the machine. As the appliance is used over time, hoses and other connections can loosen and begin to leak. Be sure to secure any loose connections.

· If the above items did not assist you in resolving the issue, it could be a number of other underlying causes - primarily an electronic pressure sensor, switch, thermistor or the unit's main control board. These parts are commonly replaced by experienced service technicians.

Apr 11, 2013 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Problem with water in tub of front load washer


Two possibilities here - bad valve, not closing completely when off or you have a bad control that is sending residual voltage to the valve when it is off. Contact a service technician.

Aug 11, 2012 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

How do you remove display panel from frigidaire affinity washer


Pull out the detergent drawer, pressing the catch button in the rear of the drawer. There are a couple phillips screws through the panel around the drawer. Take those out. The display panel (including the entire plastic piece) is attached by plastic clips. Unsnap them by applying firm, controlled pressure along the top and sides of the plastic panel. Should come right out for you.

Feb 20, 2011 | Frigidaire Affinity ATF7000ES Front Load...

1 Answer

Why does my detergent drawer always hold water in the fabric softner and Bleach drawers


pull the drawer out and give it a good cleaning in warm water/also take a look into the hole you pulled it out off and make sure it not blocked with mould etc.adrian.;;;;;;

Nov 11, 2009 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

My washer is giving error code e10 and im not sure what to do my washer is a frigidaire front load


I have an error code chart that came with mine and it says a few different things for E10. 1st says water not entering washer. 2nd says water leaks. 3rd soap dispenser drawer is open. In another post there was something about a magnet needed in the drawer too. But I would suggest checking your hoses and making sure you have water and the drawer is completly closed.

Jan 18, 2009 | Frigidaire ATF6000ES Front Load Washer

1 Answer

(front load ATF6000ES) is constantly leaking detergent


the loose vane cant affect leaking first open the drawer look on the back Left side of the drawer push down on the tab and remove the drawer take it apart and clean it well top and bottom clean the inside of the drawer hsg and look for cracks on the top panel remove the two screws at the back and remove the panel reassemble the drawer assembly put detergent in it start the washer take a flashlight and look for leaks

Mar 13, 2008 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Affinity front load washer


my front load washer won't spin water out

Jan 21, 2008 | Frigidaire ATF6000ES Front Load Washer

Not finding what you are looking for?
Frigidaire ATF6000ES Front Load Washer Logo

254 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1467 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...