Question about Kenwood KDC-MP228 CD Player

1 Answer

4 digit security code reset

I've forgotten my 4 digit security code. Does anybody know if there's a "master reset" or am I stuck sending it to a Kenwood dealer?

Posted by on

  • alex wiese May 16, 2007

    Thanks Noggin! I'd been looking all over the internet for help, and this site was easiest to get help from. I'm pacific coast time, and will try the solutions I found and let you know if any work. That's what these sites are all about, helpin' each other. Thanks again

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Here is the link for the user manual if you need it; http://inform2.kenwoodusa.com/manuals/KDCMP228.pdf Page 5 shows the reset button, page 19 shows all the security code procedures which have to be followed even after a reset. This site has a few partial methods which might be worth trying for your player but unfortunately no complete solution; http://forum.ecoustics.com/bbs/messages/4/312069.html Sorry but I think it has to be a dealer - if it was so easy there would be no point having security codes at all - Kenwood says; "How do I reset my security code? If you do not know the security code for your unit, you will need to take the unit to a Kenwood authorized service center to have it decoded. The code feature can only be activated when the code has been entered twice, so it isn't accidentally activated. The service center will often require you to provide a proof of purchase as this feature is designed for theft prevention and the proof of purchase will ensure you are the rightful owner of the product. You can locate the nearest service center in your area here, or by calling (800) KENWOOD. Though we try to locate service facilities in local areas for our customers, at times consumers may be required to ship their product to the facility for repair. Once you have had your code reset, please make a note of the code and keep it in a safe place away from your vehicle." Hope this helps - sorry if bad news :)

Posted on May 16, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I use master reset code?


You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Dec 30, 2012 | Nokia 1112 Cellular Phone

2 Answers

I forgot my security code for my Nokia 5130


If you have forgotten the security code for your Nokia 5130, you can do a master reset to your mobile phone. This would restore your phone with default factory settings. You can get the free master reset code for a Nokia 5130 from http://www.unlock-free.com/nokia-master/nokia-5130.html All the best mate.

Dec 12, 2012 | Nokia 5310 Cellular Phone

1 Answer

NOKIA 6300


Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Master Default Security code:1122
Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will Solved

Dec 06, 2012 | Nokia 6300 Cellular Phone

2 Answers

I forgot security passwerd


You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Sep 17, 2012 | Nokia 1100

2 Answers

Unlock nokia mobile


ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000


Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Aug 04, 2012 | Nokia 2310 Cellular Phone

1 Answer

Ive forgotten my sony ericsson's phonelock code is there a master reset or master overide code ?? x thanx xx


ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000 Default 6 Digit Security code: 123456 or 000000 Default 6 Digit Security code: 000999 or 1122 Type *#06# at the mobile screen to know IMEI no of your mobile. send the IMEI no to me and i will reply you with unlocking code. IF Problem not Solved So Please New Software install in the Phone Problem will Solved OR: If For puk & pin cod problem So Please Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator Enter The Puk code and Yes Enter The pin code and Yes So Puk code Open and Problem will Quickly Solved

Aug 22, 2011 | Cell Phones

1 Answer

I've lost my imei and i've forgotten my security code dont know what should i do?


If you forget the security code means get the master reset code for that one, master unlock code is a code that completely resets your phone, removing any security locks , get the code from this site Onlinegsmunlock.com, it has the best services for the master reset code for your Nokia 3110 model mobile.....I hope that it may helpful to you....

Aug 03, 2011 | Nokia 3110 Cellular Phone

3 Answers

Hey i have a nokia 6500 classic and my imei is :358666017120771 ,i have forgotten the security code can anybody help me plz plz


Welcome to FixYa!

So you don't know or you have forgotten your Nokia Security code? No data cable needed with this new solution.

So what is a master code?
Well lets assume you have forgotten your security code. The master code is a 10 digit number that will always be accepted as if it were your actual security code.

You can then use the master code to change your security code back to what ever you like. When your Nokia handset asks you for the security code simply enter the master code.

download here
password: theologaster (for file that you downloaded )


download and follow the instructions step by step .
this only works for DCT4 generation, like:
3100(b), 3108, 3120, 3200(b), 3220, 3230, 3300, 3360, 3510(i), 3530, 3590, 3595, 3600, 3650, 3660, 5100, 5140(i), 6020, 6021, 6100, 6101, 6108, 6200, 6220, 6230(i), 6260, 6310(i), 6500, 6510, 6590, 6600, 6610(i), 6620, 6650, 6800, 6810, 6820, 6822, 7200, 7210, 7250(i), 7260, 7270, 7280, 7600, 7610, 7650, 7700, 7710, 8310, 8390, 8800, 8910(i), 9300(i), 9500, N-Gage

Do comment if it helps you in any manner , and i wish that it can be helpful to you

Apr 23, 2011 | Cell Phones

2 Answers

Master reset code for a w208 can anybody help ta


Hi redevil,
For resetting code, u need to bypass the security code.
To pass the security code, follow this step :
1) when it asks for security code, press and hold menu button(the top button above the direction keys) for 3-4 secs.
2) then the gap for inserting security changes from 4 to 6 lettered.
3) type 000000 (six zero) and bypass the security code.
4) Use same process while changing or reseting ur security code. OK!
================================================
Send me feedback and rate my solution.
Be sure to post a clarification request for ur problem after it is solved.
SAJAN (sajwhat_2003@yahoo.com/sajwhat@hotmail.com)

May 02, 2008 | Motorola Mobility SLVR L7 Cellular Phone

1 Answer

Forgotten Security code


im not sure but try the last four digits of the cell number

Dec 01, 2007 | LG VX9800 Cellular Phone

Not finding what you are looking for?
Kenwood KDC-MP228 CD Player Logo

2,088 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4981 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...