Question about Daisy Toys

1 Answer

I lose presser when I pump up the airrifle? - Daisy Toys

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has answered 1,000 questions.

  • Master
  • 1,212 Answers

If it has not been oiled, try oiling it first with pellet gun oil, or a non-detergent oil like Labelle light oil.

What oil have you used to oil it if you have oiled it before? If motor oil, 3 in 1, or WD 40, the problem is the pressure cartridge needs replacement. Motor oil detergents disolve the plastic seals, and the other 2 listed will leave residue that can glue things together.or the residue can clump and interfere with sealing.

The only oils to use are pellet gun specific oil, Labelle light weight oil, or pneumatic tool oil

Posted on Oct 30, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I want a pellet clip for a power line.22pump air rifle can you help me.

contact the manufacturer FIXYA does not sell any products

Feb 14, 2017 | Optics

1 Answer

Need a Airsporter Breech Plug Lever Part No. 16-2414 Part Number: 16-2414 Product InformationDeliveryReturns Product Information BSA Airsporter Breech Plug Lever Alloy.

Where are you as I need to know to send you the information of a possible supplier of the firearm parts even though it is an airrifle it is classed as a firearm in certain countries

Jan 21, 2017 | Optics

2 Answers

Was told try not adjust clutch but I'm thinking now it's a hydraulic. Should I bleed it then?

fluid level? do you pump the pedal just to make it work? then bleeding may help.

Oct 10, 2015 | Cars & Trucks

1 Answer

I have a break barrel BSA air rifle with a 6623serial no ho w can I find what model it is

Take a look at the chambers gunspares site airrifles BSA and click on each model and look at the parts diagram for each model until the closest match is found

Feb 18, 2015 | BSA Optics

1 Answer

I have a diana 177 airrifle that keep going out of sight really quickly. how do i fix it?

Possible that the alignment or the settings are off the scale.
Please post this to the relevant link in Fixya.

Jan 17, 2013 | Washing Machines

1 Answer

I change the presser, for a walking foot, and the nedlee started to stucked, and then I change for the presser again and now doesn't sew at all, now only sew a few stitches and then the tread loses both...

This sounds like you have one of two things going on:

1. the tension, probably upper, is too tight or the thread is looping or catching along the way threading isn't right


2. the needle is bent.

Try rethreading and check the tensions and then also make sure and try a different new needle. Make sure the stitch type is set right for the presser foot too! :)

May 04, 2011 | Brother Sewing Machines

1 Answer

We are having a fuel problem. is the pump in the tank or a inline pump. We can get it running by putting fuel into the carb but wont stay running.

Remove all fuel pumps.Buy a LOW PRESSER inline electric fuel pump attach it between fuel tank & carb Most smaller portables I've worked with have this problem. The mechanical & electric stock pumps wair out fast. You should be able to purchase one at any welding supply house High presser pumps will give you fooding problems with carb.

Jan 04, 2011 | Miller Trailblazer 302 Welder Generator...

1 Answer

Presser foot

I figured it out! Yay me! There is a very small hex screw on the side.. i just loosened it, scooted the rod down and tighetned it! Thanks so much for your help! Much appreciated!

Jan 15, 2008 | Sewing Machines

Not finding what you are looking for?
Toys Logo

Related Topics:

774 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daisy Toys Experts

Tom Chichester

Level 3 Expert

35668 Answers

David Ellis Rhea

Level 3 Expert

2477 Answers


Level 3 Expert

76649 Answers

Are you a Daisy Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides