Question about Projection Televisions

1 Answer

Burglars stole my tv when i recovered it no picture just sound

There is no apparent physical damage, but when the screen is on the picture itself seems like it is a picture of a crack.

Posted by on

  • hellojenny24 Jan 03, 2009

    thanks alot! is the reflection mirror repairable if so is it expensive?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 899 Answers

The reflection mirror is probably cracked from someone jarring the tv about , you will need to look inside the set

Posted on Jan 03, 2009

  • jason Jan 04, 2009

    the mirror can be replaced fairly easily and should not be expensive , look inside the set to confirm the mirror has cracked and then contact the tv's manufacturer or look online to get the reflection mirror. hope this info is worth a fixya , and if you need any further assistance ,I will be happy to help

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My rca projection tv picture looks like it has shifted and is now very blurry, it has a red, green and blue lines across the top


Hey
I don't have much experience with RP-Tvs but i will give this a go.

First try all physical issues such as:
  • Damaged Cables
Next make sure the resolution and picture settings are working (Restore to defaults)

If all else fails it could be a damaged screen
This happens when:
  • Cleaned Improperly
  • Excess pressure is applied to the screen
  • Overheating
  • Basically any malicious damage

Hope this helps
-Ryan

Mar 07, 2011 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

I have a 60 inch mitsubishi flat screen n i someone shot an bullet thru my tv n i would lik to have a quote on how much would the repairs be?


Sorry tv not repairable,the picture screen panel is broken or damages.The tv picture screen panel are 90% important to the tv and it is limited in production by the tv corporations,no where u can buy tv picture screen panel except the tvs corporations themselves.By replacing the tv picture panel,will cost the same as a new tv,by replacing the picture screen panel alone,because of it limited production and important to the tv itself.Sorry this not worth as a whole tv anymore,now tv only as salvages tv for it electronic boards for parts only now.

Feb 02, 2011 | Mitsubishi WD-57733 57" HDTV

1 Answer

My screen 0n my 42 inc plasma tv is cracked without any physical damage done by us, there is no longer any picture and there is a buzzing sound comming from the tv. The tv is still under manufactures...


Talk to the tv compannies costumer service,think u out luck,they will not honor the warrety,because screen crack damage,the tv is worthless as whole tv,only now might basic inter salvage eclectronic circuits boards parts.

Dec 15, 2009 | Projection Televisions

1 Answer

No picture- no sound


hi
first of all u should check ur transistor connections.Check your Horizontal and vertical output transistors.You should also check the horizontal and vertical yoke connections as well as your low voltage regulators.... if any of these got damaged u should purchase a new one.. but try to purchase with the help of a tv service assistant...
thank u!!!
rate me

Jul 12, 2009 | Mitsubishi WD-65732 65" Projection HDTV

1 Answer

TV turned off itself


Can you still turn it on?
If so, does it stay on with sound?

If the sound is ok and the picture is blue (even when changing channels, inputs, etc.) the lamp may have gone out.

Can you see the TV menu when you press the menu button on the remote or TV?

Jan 07, 2009 | Sony KP-51HW40 51" Rear Projection...

2 Answers

Tv lcd screen damaged/cracked screen distorted


If the LCD panel itself is physically broken, it must be replaced. It can not be repaired. If you could post the make and model, I can try to get you the replacement part number and cost. Realize that this cost may exceed the cost to replace the entire set.

Dan

Sep 16, 2008 | Projection Televisions

1 Answer

Thin white lines running across the top 3 inches of my toshiba 32inch flat screen only 2 years old. They appeared one day for no apparent reason.


Check the connections at you TV and anything else you may experience this problem with. If the connections are good then it is quite possible it is the scan board inside the TV. If still under warranty send it in to have repaired. If not then I would speak to a rep about your situation and try to get this fixed by the manufacturer. If it is in good condition with no physical damage Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} that may have caused this.

Aug 18, 2008 | Projection Televisions

2 Answers

I bought a Sharp LC37DW99U at the end of November 2007. There is a one year warranty. The image developed a cluster of vertical lines on the left side of the screen in early February 2008. Brandsmart sent...


Im a HP LCD and Plasma TV technician and I know on HP tv's if theres vertical or horizontal lines, this can indicate a bad video controller board.

What i would do first is perform an alignment to see if that fixes the vertical lines. Your TV should have a feature for it to automatcially perform an alignment of the mirrors.

if the alignment doesnt work, I would say your video controller board is bad.

Mar 19, 2008 | Projection Televisions

1 Answer

Just bought a PANASONIC PT-47WX53G On ebay for what I thought was a steal. It was explained that somehow someone got into the service menu and messed something up with the convergence on the green gun....


You can try restoring to factory defaults, and you can try the manual convergence option. If the manual convergence fails to reset (as in, the crosshairs physically will not move), then the convergence board is bad, and will need to be replaced or repaired (if you are a good circuit solderer).

Mar 07, 2008 | Panasonic PT-47WX53 47" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...