Question about Kenwood KAC-9102D Car Audio Amplifier
Hi i got the kac 9102d and at first i had a cap so i took it out then i changed form 8 gage wire to 4 but i need to buy some eye terminal so i went to audio shop to get some and he had some that looked to big to fit in the terminal on the amp so i placed one over the power of the amp and it just sparked a alittle but no power cable wanst hooked up to amp so i dont think its a short but then agian i dont know so i hooked it up with 4 gage and it wont turn on the i check for power and the fuses and its all good i also opeaned it up to see if anythin was burned but i could see anything got any ideas thanks my amps overheats to so far i ve been other people problems and everybody amps overheats these things suck i had a 600 watt kicker before this and that bumped hard and last longer than this maybe thats why it costed 2 as much but worth every penny
I just had the same problem and i took it apart and couldnt find any thing wrong so i took it to a place called turnbulls car audio repair and the just wacked my with a £60 bill to fix it never again will i buy kenwood. EVER!!!
Posted on Oct 16, 2007
HEY HEY HEY I GOT IT SOLVED ...WELL MOST OF IT....TAKE THE AMP APART ULL NEED A STAR AND A FLATHEAD....TINY ONE FOR FLATHEAD....MAKE SURE U TAKE THEM ALL OFF.....AND TAKE ALL THE SCREWS OFF THE INPUTS AND POWER AND GROUND AND WHATNOT AND LOOK AT THE CIRCUITRY BY THE PHONE CORD THING ( U SHOULD BE LOOKIN AT THE GREEN SIDE BY NOW ...NOT THE ORANGE BROWN) AND ULL SEE A SHORTED OUT PIECE OF THE BOARD OR SOMETIN???? ITS NOT CONNECTED N E WAYS BUT PUT FOIL OR SOME SOLDER IF YOU GOT SOME? OR TAKE IT TO A ELEC. EXP AND ASK HIM TO SOLDER IT......B/C I FOUND NO TRANSISTORS BURNT NOTHING.....I WAS JUSS HOOKING IT UP WHILE THE CAR WAS ON TOUCH MY POSITIVE TO THE POSITIVE AND IT SPARKED AND DIDNT PLAY N E MORE. BUT IF YOU GOT TIME AND NO MONEY THIS IS BEST TO DO!!!!
Posted on Oct 03, 2007
I had the same problem that you did... i cleaned my cables and when i put the cable on it sparked..... your amp and mine is blown... it is something inside that shorted out..
Posted on Aug 23, 2007
Your amp its not connected as it should be, moust schenge the conections
Posted on May 18, 2007
Tips for a great answer:
Sep 27, 2011 | Kenwood KAC-9102D Car Audio Amplifier
Feb 22, 2011 | Kenwood KAC-9102D Car Audio Amplifier
May 20, 2010 | Kenwood KAC-8104D Car Audio Amplifier
Apr 28, 2009 | Kenwood KAC-9102D Car Audio Amplifier
Sep 08, 2008 | Kenwood KAC-9102D Car Audio Amplifier
Jul 24, 2008 | Kenwood KAC-9102D Car Audio Amplifier
Jun 02, 2008 | Kenwood KAC-9102D Car Audio Amplifier
Feb 13, 2014 | Kenwood KAC-9102D Car Audio Amplifier
Apr 16, 2013 | Kenwood KAC-9102D Car Audio Amplifier
160 people viewed this question
Usually answered in minutes!