Question about Biostar P4M800 Pro-M7 Socket 775 mATX MB w/Video Audio (ETKMBB-P4M8P-M7) Motherboard

1 Answer

I need vga driver of p4m800 pro-m7

I have a p4m800 pro-m7 mother board. i have alraedy install windows 7. then i wnat install vga driver.still i cannot find this driver.can you this problem plaese help me

Posted by on

  • harif Nov 02, 2012

    i add vga card. now is ok

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Biostar Master
  • 3,606 Answers

Hello the homepage is here:

http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=94#dl

But the driver for win 7 is not there.
It will not help to download the xp driver
My advise is to buy a graphic card that supports win 7
The mainboard have an AGP 8X Slot for extenal graphic card

If you are in doubt adding a graphic card
let a expert do it for you.

Good luck

Posted on Oct 30, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

RescueTechLA
  • 2653 Answers

SOURCE: i need a biostar p4 m800 pro m7 on board vga

There are two versions of your board.

Look under the 775 section for specific model.

http://www.biostar-usa.com/downloadmain.asp


Posted on Feb 21, 2009

  • 832 Answers

SOURCE: i have a biostar k8m800 mother board but i have no

VGA driver software for win7 can be downloaded at the
internet. Just type at the search engine (Download for
VGA driver software for Win7), and click on it. Just follow
the steps instructed to get your download, and install it
in your PC.

Posted on Dec 09, 2009

SOURCE: motherboard driver

http://www.biostar.com.tw/app/en-us/mb/driver.php?S_ID=268

Posted on Oct 28, 2007

graemevm
  • 519 Answers

SOURCE: Cannot set resolution 1640x1050

Hi,
To answer your question in short: If your video card and monitor drivers are installed correctly and you are able to adjust the resolution to 1640x1050 in your settings then your card and monitor are able to handle that resolution.
Remember that at higher resolutions your display card performance might become very slow.]
This is due to your BIOS shared memory being only 64Mb.
To get better performance you will have to upgrade your display card to one with more memory. ie. 256Mb. or more.
Best of luck.
Regards,
Graemevm

Posted on Apr 22, 2009

venexcsd
  • 1185 Answers

SOURCE: my biostar P4M800 Pro-M7 only shows 1gig of ram, but i have 2gig... Wat could be the problem?

Are both chips identical ? if so

Take out the ram and replace it one stick at a time in the socket 0 or 1

If both sets of Ram work then check your instruction book on the motherboard and see what is the maximum ram it will take .

Get a copy of Memtest86+ from www.memtest.org
and run it on both chips , that will show if there is any errors on them.

Posted on Jun 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P4m800 m7 REV:3.1


xp driver can support vga to window xp

Jan 28, 2014 | Computers & Internet

1 Answer

I can't instal windows xp on this bord msi p4m800-m7 rev:3.1


Did you install the motherboard drivers first?

http://www.biostar.com.tw/app/en/mb/driver.php?S_ID=95

Did you also go into BIOS Setup, and in Boot Options, set the first boot device to CDROM?

Regards,
joecoolvette

Jul 17, 2011 | Biostar P4M800 Pro-M7 (P4M8PROM7)...

1 Answer

Get sound drivers


Hello DJ Shenon!
Biostar has all the drivers for your P4M800 Pro-M7 motherboard available for download on their website. The link for your motherboard is P4M800 Pro-M7

Nov 22, 2010 | Biostar P4M800 Pro-M7 Socket 775 mATX MB...

2 Answers

I want drivers for gf7050v-m7 se mother board for windows 7


download windows vista driver for your support driver windows 7

biostar mother board GF7050V-M7 Ver. 6.x
biostar mother board GF7050V-M7 SE Ver. 6.x

Nvidia support driver Click here
or you can select option 2 on the page that appears to automatically detect product nvdia

gud luck

Oct 19, 2010 | Biostar GF7050V-M7 nVIDIA GeFORCE 7050...

1 Answer

I need P4M800-M7 mother board driver


go to intel web page and type in your product in the search bar and you should be able to find your drivers.

Feb 24, 2010 | EliteGroup P4M800-M7 Motherboard

1 Answer

I need a biostar p4 m800 pro m7 on board vga driver


There are two versions of your board.

Look under the 775 section for specific model.

http://www.biostar-usa.com/downloadmain.asp


Feb 21, 2009 | Biostar P4M800 Pro-M7 (P4M8PROM7)...

1 Answer

PLEASE HELP ME


hi
this is web with graphics drv.

http://www.drivers-software-download.org/tag/video-via-p4m800-m7-driver
and here are the rest of drivers

http://www.drivers-software-download.org/tag/via-p4m800-m7

Sep 18, 2008 | Computers & Internet

Not finding what you are looking for?
Biostar P4M800 Pro-M7 Socket 775 mATX MB w/Video Audio (ETKMBB-P4M8P-M7) Motherboard Logo

1,132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Biostar Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Jerry Umali

Level 3 Expert

979 Answers

Are you a Biostar Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...