Question about PC Desktops

1 Answer

TOCA Race Driver 3 for Windows Problem!The game starts loading the first track and then when its about to begin - it sends me back to windows.

Posted by on

  • mi37 Jan 05, 2009

    Here goes:NVIDIA GeForceFX5200 128MB
    CPU IntelCeleron 1300MHz
    RAM 256MB
    I guess it's because the game needs 1.4 processor at least, but I have played the demo version on the same computer and I thought it would handle the game as well...


  • Dick
    Dick May 11, 2010

    Post what computer and video card you are using. To find out what video card you have if you are running Windows XP press Start, All Programs, Accessories, System Tools, System Information. When that comes up expand the Components section by clicking the + sign next to the word components, then click Display. Your video card is shown on the line Adapter Description.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 733 Answers

This is video card error,please check if your system in compatible to run this game search specification of the game .

Posted on Nov 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had presently refreshed my gateway desktop cumputer windows 8. Everysince my PCH. Games start to load nut then there is nothing. They don't finish loading


First try to uninstall and reinstall the games, otherwise uninstall them all the do the windows refresh over, then get all windows updates before installing your games.

Jun 03, 2014 | PC Desktops

1 Answer

I cannot play all the games on legends of darkness


More than Likely the problem lies in your graphics card.... It may not meet minimum req for the game or your having driver issues. I would check your device manager to see if there are any issues. if running windows 7 just hit the start menu type in the search " Device Manager" Open it up and look at your display adapter and chip-set if it shows a yellow triangle there are issues. also if your display adapter says " Standard Windows adapter " then you need an up date. Please send me the model number of your computer and I will send you the link to download and install the correct driver. this should solve your issue.

Dec 27, 2013 | PC Desktops

1 Answer

Windows failed to start


This usually happen sometimes because of the installation you do you can to try and resolve the problem:
1.insert the windows installation disc
2.make show you press the key which opens the boot menu on windows xp it's usually F9( it appears at the beginning when booting)
3.let the disc load and select install copy then repair or if you see repair select it.and continue from the.

Mar 26, 2012 | E-Machines eMachines Desktop PC

2 Answers

How do i reboot my computer my self.


Click the "Start" button from the taskbar. Select the "Turn off computer" option if you are running a Windows operating system before Windows Vista, or select the right arrow in Vista. Select the "Restart" option. 2.)Press and hold the Ctrl+Alt+Del keys simultaneously. Do it again. This will reboot the computer. 3.) Shut down the computer. Sometimes the computer will not respond to a reboot. Maybe the keys are temporarily disabled or the system has chosen to completely ignore you. In these rare cases, it may be better to shut the computer off using the power button. If you do shut off the computer, press and hold the power button for 3 to 5 seconds. Then be sure to wait a minimum of 45 seconds before turning it back on. This allows the capacitors in the computer time to discharge, which allows the memory (not the hard drive) to do a full dump of data. This allows a cleaner restart when you turn the computer back on. 4.)Disconnect the power cord. Do this as a last resort. Unsaved data may not be retrievable with this option, but sometimes it is the only option. Reconnect the power cord. Turn the computer on. else Insert the CD then reboot. While the system is booting, hit the F12 key to access the boot menu (this could be a different key depending on your system. If you have a problem with your hardware configuration or your computer's display drivers that prevents Windows from loading normally, you may be able to resolve the problem by booting into Safe Mode and changing the relevant settings. To enter Safe Mode in Windows 7, Vista, XP, or 2000:
Note: If you have more than one partition installed, you may need to select an operating system and press Enter before entering Safe Mode.
Turn on or restart your computer.
After the memory test, the words "Starting Windows" will appear on a black background. When this happens, press and hold the F8 key. This will present a screen with the following options to choose from. The exact moment that F8 is pressed will determine the contents of the list, and the list may vary from computer to computer. For example, your computer may not do a memory test or it may have a SCSI BIOS to load in addition to the motherboard's BIOS. If you have trouble getting the list below to appear, restart the computer and then press F8 repeatedly while the computer is starting.
Safe Mode: Boots Windows with only the basic drivers needed to load the operating system. Uses basic drivers for mouse, keyboard, display (VGA), mass storage, and default system services and drivers, with no network components. In Windows 2000, a log file will be created to track the progress of the system boot, which is located in the Windows 2000 folder.
Safe Mode with Networking: Loads the Safe Mode configuration, but also enables network devices and services. In Windows 2000, a log file will be created to track the progress of the system boot, which is located in the Windows 2000 folder.
Safe Mode with Command Prompt: Loads Windows in Safe Mode, and, after logging in, opens a command prompt instead of the normal desktop. In Windows 2000, a log file will be created to track the progress of the system boot, which is located in the Windows 2000 folder. Note: You should try booting to the command prompt only if you feel comfortable operating within the DOS environment.
Enable Boot Logging: Boots Windows with all of the normal files and drivers, but writes their status to a log file at each step. In Windows 2000, this log file is located in the Windows 2000 folder and is named ntbtlog.txt.
Enable VGA Mode: Boots Windows using a plain VGA 16-color 640x480 display driver for the highest level of compatibility with video cards. In Windows 7 and Vista, this mode is called Enable Low-Resolution Video. It is otherwise identical.
Last Known Good Configuration: Boots Windows using the last registry configuration that is known to work. This is a way of undoing problems created by installing incorrect drivers or possibly by registry corruption. It will not, however, fix problems caused by corrupted or missing files.
Use the arrow keys to move up or down this menu to make your selection, and then press Enter. If you need to update software or access the Internet while in Safe Mode, select "Safe Mode with Networking".
All the Best!

Sep 15, 2010 | PC Desktops

1 Answer

My PC have a problem, Every times I turn it on , it always apearing message . that is .. window need to Install SM-bus controller


Try this.

Restart your computer in safe mode. To start in "Safe Mode", power on your computer and immediately after the BIOS loads, begin tapping the F8 key on your keyboard. Do so until the Windows Advanced Options menu appears. If you begin tapping the F8 key too soon, you may get a "keyboard error" message. If this happens, restart the computer and try again waiting a few seconds longer to begin tapping the F8 key. When you get the Advanced Options Menu, use the arrow keys on the keyboard, select Safe mode and then press Enter.

After Windows loads in safe mode your screen will be different and it will say "safe mode" in each corner.

Put your original eMachines Recovery CD in the drive.

Click "start" and then open the "control panel".

Double click the "system" icon (looks like a little computer and is usually near the bottom) and then select the "hardware" tab at the top. Click on the button that says "Device Manager", scroll down if necessary until you find "system devices". Click on the "plus" sign to expand the list and look for a yellow exclamation point. Right click that entry and select "update driver" from the dropdown list.

When the Hardware Update Wizard loads, highlight the selection that reads "Install from a list or specific location (Advanced)" and click Next. The next page should default to "Search for the best driver in these locations" and a check mark should be in the box that says "Search removable media (floppy, CD-ROM....)". Make sure these are checked and click Next. Windows should then find the appropriate driver. Doubleclick the driver name and then click Finish.

Now shutdown and restart your computer normally. If this does not work, your computer most likely has faulty hardware and you will need to take it back to your dealer for repair or replacement.

Jan 02, 2009 | E-Machines T5082 PC Desktop

2 Answers

I have an Extensa 5620...I was installing Blackberry Phone software on the laptop...upon completing the install, I needed to restart...While the computer was beginning to shut down, I accidentally ejected...


Try rebooting it with the cd you ejected back in, to see if the installation finishes. If this does not work, take the disk back out and try booting with the option Last Good Configuration.

Nov 28, 2008 | Acer PC Desktops

2 Answers

Intermitten issue of no sound while playing NSF: MW


Uninstalled and reinstalled the game.
Everything worked fine after that.
Cheers!

Nov 12, 2008 | HP Media Center PC 873n (P9875A#ABA) PC...

1 Answer

Blank monitor


Hi,
To resolve the problem,do the following step,
1. Power on the system
2. At dell logo screen before windows xp starts to load tap on the F8 key slowly 5 to 8 times
3. Select safe mode
4 Hit enter on the next screen and logon using the administrator or your name
5. Do the system restore, when you have logged on, this would return your system back to the date when it was working fine
6. To system restore
click start>all programs>accessories>system tools >system restore



Thanks
proton

Oct 11, 2008 | Dell Dimension 2400 PC Desktop

4 Answers

My computer continuously restart


ok....first off
1. Is your computer a laptop or desktop
2. Which operating system are you running
3. When did this start happening and what were you doing last?


Please let me know so that I can further help you..

Thanks

~~Jasta~~

Mar 21, 2008 | PC Desktops

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...