Question about Sony Ericsson Sony-Ericsson HBH608 bluetooth headset Headset

1 Answer

How do I connect my HBH-608 head set?

I have a HBH-608 headset and recently changed phones. I do not remember how to set it up on my new phone (LG Voyager). Can you help?


Posted by on

  • Anonymous Feb 03, 2009

    would not connect to my phone



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 1 Answer

Just turn on bluetooth in ur mobile and then turn on ur bluetooth headset by holding the power button for atleast 5 sec and if blinking green light show up it means that it is turned on,if it shows blinking red and green then it is ready to get paired with ur mobile phone so u can straight away connect the bluetooth by selecting handsfree and new device and in the list of divices select hbh608 and get it paired.if it shows a blinking green then hold the volume increase and decrease button at the same time for 5 sec and then the light turns blinking red and green and then u can go to handsfree and new device and select HBH608....its easy try doing workss....

Posted on Mar 02, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I cannot pair my Nokia N95 with HBH-608 Akono headset

Press and hold down the headset volume key in the centre. Hold it for about 5 sec. The led will now flash on/off in red. This is the pairing mode. Set your mobile phone to blue tooth discovery mode,until it finds the headset, key in the pass key, 0000. It should now work. You may need to set the phone to select the headset as an automatic connection so it connects whenever it is on and in range.

Jul 15, 2008 | Sony Ericsson HBH-PV705 Headset

1 Answer

I cannot pair my Nokia N95 with HBH-608 Akono headset

1)Turn on the blue tooth headset
2)Turn on bluetooth on your phone and search for devices.
3)When it finds the device select it and click connect.
Thats all.

Jul 14, 2008 | Sony Ericsson HBH-610a (Auto Pairing)...

1 Answer


try pressing the vol+ and vol- buttons at the same time
for 5-10 seconds. This resets the headset

May 28, 2008 | Sony Ericsson Akono HBH-608 Wireless...

1 Answer

Can't connect the HBH 608 bluetooth to my nokia 6288 or Xda Orbit

first of all pair the devices using bluetooth . then go to paired devices and select the device and set it as authorized

Dec 04, 2007 | Nokia 6288 Cellular Phone

2 Answers

Sony Ericsson W900i Pairing With HBH-608

turn the bluetooth on wait 10 seconds after the bluetooth has turned on. after it has turned on hold the (+) & (-) volume buttons at the same time for about 5 seconds. the light on the outside will then start to flash green and red, and it is ready to pair to your phone.

Oct 05, 2007 | Sony Ericsson HBH-610a (Auto Pairing)...

2 Answers

Accept code for a bluetooth headset

If this solution doesn't work hold down both the volume up and down buttons on the head set for about 5 seconds whilst searching for a new paired device with your phone then when asked enter the code 0000 and connect

Sep 17, 2007 | Nokia 6300 Cellular Phone

1 Answer

Replacement parts - my eat latch fell off!!

Try your local mobile phone shop
if your in Australia this would be Telstra, Leading edge
or any other mobile phone shop.
Also at the markets

Jul 29, 2007 | Sony Ericsson Akono HBH-608 Wireless...

2 Answers

Bluetooth ear piece

blinking red and green means the headset is in pairing mode and ready to be connected to your phone. This means it is either the first time you have paired the headset or you have depressed the volume +/- buttons simultaneously for more than 5 seconds. If your phone cannot find the headset, it may be a compatibility issue. Try pairing the headset with a friends phone, possibly a sony ericsson. Good luck.

Jul 15, 2007 | Sony Ericsson Akono HBH-608 Wireless...

2 Answers


Try to hold the volume command on - and + both It will recognize the device when searching for bluetooth headset.

Feb 15, 2007 | Sony Ericsson Akono HBH-608 Wireless...

Not finding what you are looking for?
Sony Ericsson Sony-Ericsson HBH608 bluetooth headset Headset Logo

1,026 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Ericsson Radio Communications Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

24726 Answers


Level 3 Expert

875 Answers

Are you a Sony Ericsson Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides