Question about Sewing Machines
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";}
all machines thread the same. TTN tension, take up,
Beginning with the spool, guide the thread through the thread guides to the tension assembly. Pull the thread through the tension assembly and test it to make sure the tension is working correctly.
(To do this test, adjust your tension setting to normal or medium or 5 or something in the middle. Raise the presser foot and pull the thread through the tension. It should pull easily!! Lower the presser foot and pull the thread. It should pull noticeably harder.) If it passes this test, continue up through the take up lever,then down through the thread guides to the needle. Make sure your needle is fully inserted and turned the correct way.( If you load your bobbin case from the left side,the needle rule is normally FLAT to the RIGHT is RIGHT. There are some exceptions. If you have a newer style drop in bobbin or your bobbin case loads in the front then the rule is FLAT to the BACK.
Posted on Jan 03, 2009
Tips for a great answer:
Apr 03, 2016 | Necchi Sewing Machines
Nov 25, 2015 | Necchi Sewing Machines
Jun 29, 2015 | Necchi Sewing Machines
Mar 20, 2015 | Necchi Sewing Machines
Aug 14, 2010 | Necchi Sewing Machines
Jun 09, 2009 | Necchi 3101 Mechanical Sewing Machine
May 01, 2009 | Necchi 3537 Mechanical Sewing Machine
Jan 10, 2009 | Necchi 3537 Mechanical Sewing Machine
Nov 20, 2008 | Necchi 3101 Mechanical Sewing Machine
Dec 03, 2016 | Brother Sewing Machines
240 people viewed this question
Usually answered in minutes!