Question about Dell Inspiron 9300 Notebook
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Feb 28, 2017 | Amazon Computers & Internet
May 20, 2016 | Vizio Computers & Internet
When you set up a dial-up Internet service connection on your Windows computer, it comes automatically configured to disconnect itself after a predetermined period of inactivity.
This means that if you walk away from your computer and forget that you're online, your internet connection will automatically shut itself down.
If this feature isn't as helpful as you assumed it would be, you can turn it off using the Network and Sharing Center.
Click "Control Panel."
Click "Network and Sharing Center."
Click "Change Adapter Settings."
Right-click on your dial-up Internet service icon.
Clear the check box next to the "Auto Disconnect" listing on screen.
The auto disconnect on your computer Internet service connection is now turned off.
also if its running slow
Slow computers that persistently disconnect from Internet access may have issues with the wireless setup or if on a wired connection, there may be a problem with the Ethernet cable or port.
Troubleshooting connection and speed issues can save money rather than taking the computer to a technician or repair shop.
Additionally, some firewalls and security features can make it difficult to access certain types of websites.
Before spending money to have the computer diagnosed, try running through the most common, basic causes of connection issues.
Consider the type of site you are trying to access.
High-traffic sites such as gaming sites can sometimes be affected by high volumes of users accessing or attempting to access the site at once.
Test this by attempting to access the site at different times during the day and evening; peak hours for games that typically appeal to children may be during the afternoons on weekdays while games for older or more mature audiences will see high traffic at night.
Check your Internet connectivity and determine whether you are using a wired or wireless connection.
In the lower right side of the computer screen there should be an icon displaying the Internet or network connection.
Wireless connections are displayed with connection bars similar to those seen on cell phones while wired connections may show the end of a plug next to a monitor icon.
Reset the router if using a wireless connection.
For most home routers you simply unplug the power cord from the router box, wait a moment and plug it back in.
You may have to restart your computer to reestablish a secure connection.
Access the router through the computer and check for updates. Some routers offer firmware updates that fix some connectivity issues.
While updating the router, check for Internet browser updates as well as any critical updates for your computer's operating system.
Verify the computer uses the most up-to-date version of the Web browser available.
Try a different browser. Internet Explorer is the most commonly used Web browser, but not always the best for every site.
Try downloading another Web browser such as Firefox, Opera, or Google Chrome and test the sites there.
If the connections are still disconnected and the Internet speed seems slow, it may be an Internet issue.
Trace the Ethernet cable from the Internet modem to the computer if using a wired connection.
Unplug the end of the Ethernet cable and check that the plastic head is secure and that there is a click when you return the plug to the modem; do the same on the computer end.
Inspect the Ethernet cable carefully as it runs from the modem to the computer.
If the cable was tacked down with a staple gun or other attachment, check the cable to verify it wasn't accidentally pierced.
Additionally, check for bends, twists or worn areas along the cable.
Measure the length of the Ethernet cable.
In general, cables longer than 100 feet tend to receive poorer signal transmission.
If the cable is longer than 100 feet, replacing with a higher quality cable or moving the computer or Internet modem may resolve connection issues.
Hope this helps.
Nov 28, 2012 | Computers & Internet
The Linksys Wireless-N Router model displayed on the setup screen may
vary based on the Linksys Wireless-N Router model you have.
On the next window, please follow the on-screen instructions on how to connect your Linksys Wireless-N Router:
Plug one end of the power cable into your router and the other end into an electrical outlet.
NOTE: The Linksys E3000 features a power switch, located at the back-end of the unit, next to the power port. Please make sure that this switch is ON. Other Router models may not have this feature.
Plug the Internet cable into the yellow port in the back of your router labeled "Internet". Plug the other end into the modem.
QUICK TIP: Click Show me how for an illustrated guide on how to complete the above instructions.
After completing the above steps, click Next to continue.
Setup will now perform a series of tests to determine the optimum configurations for your network. You may notice your computer connecting and disconnecting to a wireless network several times. This is normal. Your wireless network is simply being secured.
NOTE: The setup process automatically generates a unique and secure Wireless Network Name (SSID) for your convenience.
The next part of the setup automatically detects your Internet connection type. If you are using a DSL connection, you may be requested to enter your account details. If this is the case, simply enter your Account name and Password in the allocated fields. Otherwise, you may skip ahead to Step 7.
NOTE: If you don't know your Account name and Password, your Internet Service Provider (ISP) will be able to provide these details.
QUICK TIP: Click Examples to see what your Account name should look like.
NOTE: Cable Internet users will not see the above screen.
Sit back and wait a moment as setup finalizes your Linksys Wireless-N Router settings, and re-establishes your Internet connection.
Once your Internet connection is up and running, a confirmation window similar to the screenshot below will appear on your screen. Your Linksys Wireless-N Router is now secure and connected to the Internet. This concludes the setup process. Click OK to continue.
You will now be taken to the main Cisco Connect window which lets you manage and further personalize your network settings. If you would like to learn more about the available features in Cisco Connect, please click here. Otherwise, you may click on the Close button to exit Cisco Connect, and begin surfing the Internet right away.
NOTE: To launch Cisco Connect again at later time, on a Windows computer, go to Start>All Programs>Cisco Connect. To launch Cisco Connect on a Mac computer, navigate to the Applications folder in Go, and then start Cisco Connect. For more help on this, please click here.
NOTE: Cisco Connect is automatically installed each time you use the Setup CD or Easy Setup Key to setup or connect to your Linksys Wireless-N Router.
Nov 02, 2010 | Linksys Wireless-G WRT54G Router
May 27, 2009 | eMachines D3123 Desktop Computer With AMD...
Jan 08, 2009 | Dell Inspiron 1501 Notebook
Aug 29, 2008 | Computers & Internet
Apr 11, 2008 | Zyxel Prestige 660H Router
Apr 02, 2008 | D-Link Wireless
Mar 05, 2008 | Computers & Internet
May 21, 2014 | Dell Inspiron 9300 Notebook
34 people viewed this question
Usually answered in minutes!