Question about Washing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Selector switch
it is telling you, your machine has a problem you need to tell me what program are you putting it on. if you put it on a spin only and it keep going round What you need to do is turn the machine of and open the door leave the door open and put the machine back on set the program to the spin only and then shut the door press start do touch the machine till its finished that should help Its called a reset. if you have the same problem get back to me and i will help you ok.
Posted on Jan 05, 2008
According to the instruction book - it appears the machine has been stopped mid cycle then re-started.
Switch machine off, turn control knob to a solid circle symbol (they are after every set cycle). Switch machine back on and lights will flash and program is reset. You can then select wash cycle as normal.
Posted on Jan 23, 2010
From the front of the washer, spin the drum by hand, and if it feels rough, or is noisy, or rumbling, then the main drum bearings have failed..
If no noise, then problem is elsewhwere.
Hope this helps.
Posted on Jan 27, 2010
Tips for a great answer:
Jun 24, 2014 | Washing Machines
Jun 20, 2014 | Washing Machines
Jul 14, 2017 | Ariston Technologies Ariston AWD12 Front...
Jan 22, 2010 | Ariston Technologies AW125NA 13 lbs. Load...
Dec 20, 2009 | Ariston Technologies Ariston AWD12 Front...
Jul 29, 2007 | Ariston Technologies AW149NA Washer
Sep 26, 2017 | Maytag Washing Machines
27 people viewed this question
Usually answered in minutes!