Question about Samsung Washing Machines

Open Question

Samsung sensor quick P801 wash barrale loose

Barrel loosing

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: error codes

just fixed mine
i cleaned the filters inside the water lines. disconnect lines where they go into washer use needle nose pliers to pull out screens clean with water and put them back.
this wasn,t the problem with my washer .
mine i took the cover off and found the clear hose from the drum to the water senser had disconnected reattached it with difficulty as i have big hands works fine now

Posted on May 06, 2009

Ad
  • 4 Answers

SOURCE: When my Samsung Sensor Quick P801 800 washing

The machine can't balance the weight of the cloths.

Posted on Dec 18, 2009

mrfixit3667
  • 262 Answers

SOURCE: Where do you get parts for Samsung p801 washing

Any repair company on here answering queston for samsung appliances could help you in some way

give one of them a call or do a search in your local area.

example : go to google or yahoo and type samsung washer parts (((( your area )))) (((( your state )))

Posted on May 24, 2010

blueextc3221
  • 15935 Answers

SOURCE: washer not spinning correctly

4E - WATER SUPPLY ERROR

Water Supply Error occurs when water level frequency does not show changes more than 100Hz or water is not supplied up to the preset water level after 10 Minutes or more at the time of initial water supply. The error status can be cleared by turning the POWER switch OFF and back ON.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 15, 2010

  • 3 Answers

SOURCE: washing machine does not finish complete cycle

I had the same problem. I ended up paying $300 ($100 part $200 labour) for an authorized technician to replace the control board and that fixed the problem.

Posted on Sep 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I buy a belt for my Samsung washing machine p801


Ebay, RepairClinic.com, appliancepartspros.com, etc

Mar 07, 2015 | Samsung Washing Machines

1 Answer

Samsung sensor quick P801 can't close the door. The main front door can not be close easily. I take me 6 to 7 try to close it. Sometime I need to slap the door firmly. The Door seem to be close but just...


you should not be able to open or close the door with the washer ON. You must first shut off machine before closing the door, then turn the machine ON, this should lock the door closed. to open the door, you must shut the machine OFF, then the door should open easily. Follow the directions in the manual... you can Download the owners manual here, in your language of choice; Follow the link below. just copy and paste it into you browsers window.
http://www.usersmanualguide.com/samsung/washing_machine__drum_type/p801

Don't forget to rate the answer.

Jan 24, 2011 | Samsung Washing Machines

1 Answer

I have a samsung sensor quick P801 800 front loading washing machine. It is giving me error code E6. Is this an easy fix?


I had the same problem. I ended up paying $300 ($100 part $200 labour) for an authorized technician to replace the control board and that fixed the problem.

Sep 14, 2010 | Samsung Washing Machines

1 Answer

Model p801 frontload, it walk all over when in


sounds like your machine is unlevel have you taken a level to the machine and the floor and checked both , they should never walk unless they are unlevel

Dec 30, 2009 | Washing Machines

1 Answer

Washing machine does not finish complete cycle


I had the same problem. I ended up paying $300 ($100 part $200 labour) for an authorized technician to replace the control board and that fixed the problem.

Jul 06, 2009 | Samsung WF203ANW Front Load Washer

1 Answer

Washer not spinning correctly


4E - WATER SUPPLY ERROR

Water Supply Error occurs when water level frequency does not show changes more than 100Hz or water is not supplied up to the preset water level after 10 Minutes or more at the time of initial water supply. The error status can be cleared by turning the POWER switch OFF and back ON.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 04, 2009 | Washing Machines

1 Answer

Error codes


just fixed mine
i cleaned the filters inside the water lines. disconnect lines where they go into washer use needle nose pliers to pull out screens clean with water and put them back.
this wasn,t the problem with my washer .
mine i took the cover off and found the clear hose from the drum to the water senser had disconnected reattached it with difficulty as i have big hands works fine now

Nov 06, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Washing Machines Experts

Jaime Hernandez

Level 3 Expert

2326 Answers

shaun taylor

Level 3 Expert

1525 Answers

The Knight
The Knight

Level 3 Expert

74666 Answers

Are you a Samsung Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...