Question about Haier 42EP24S 42 in. EDTV-Ready Plasma Television

Open Question

Haier P42LV6-T1 Plasma TV

I've owned a Haier "Blackart" Plasma TV for about 2 years, the model number is P42LV6-T1. Upon power up, the power indicator light flashes orange fives times, the Haier logo comes up on the screen and then the unit shuts off.

Posted by on

2 Suggested Answers

  • 5 Answers

SOURCE: Haier Plasma TV problem

My experience with a Haier Plasma 42EP24S is that they have weak software chip that goes bad and can cause a number of symptoms from picture with no sound, will not recognize video inputs, or my current problem tv turns on and off irratically.  This is the second time i have replace this chip, which is the socketed chip on the vga/component/dvi input circuit card.  Last time i had this problem i ended up fixing it myself because sears took over 3 weeks and still could not figure out the problem.  I am working on obtaining this chip, probally get about a dozen so if anyone thinks this may fix there problem as well i my have some for sale.  michael@malobicky.com of Malobicky Digital Systems.

Posted on Oct 15, 2007

  • 1 Answer

SOURCE: Hi, i have a haier blackart model p42Lv6-t1 and

We had this problem and the repairman had to put a new kit with all the boards in it.Was under warranty at the time so forget the cost.

Posted on Jul 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

INPUT and MENU do not work


Your main pcb assy has shorted out. Replace it and it will fix your problem. part #tv-5210-173

May 31, 2009 | Haier HP50B 50 in. Plasma Television

1 Answer

Haier plasma tv model 42EP24S 48"


Part number for Power supply of 42EP24S is TV-5210-36
HP50B is TV-5210-195

Good Luck
Dals123

Oct 07, 2008 | Haier HP50B 50 in. Plasma Television

1 Answer

Plasma tv picture went black


I would say you dont need to repalce Servcie kit.kit is only for 42EP24S units.
examine your unit What is the problem?Is the blue indicator on?If indicator on you will have audio.
In this case I would check first Y-sus board or Z-sus board.

Good luck
Dals123

Sep 28, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

42 ' PLASMA TV MODEL NUMBER P42LV6-T1


Haier for sure recognizes the model. It's been a problem since produced. To correct the problem you'll need an upgrade kit. I'll attach the upgrade instructions and part number for the kit. Try resetting back to factory specs as noted at the bottom of instructions. Follow the procedure to a "T" when you see two menus pop up use the one on the right. Good luck! http://service.haieramerica.com/documents/SB-TV-0003.pdf

May 28, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Haier P42LV6-T1 picture


when TV overheats white lines come across the screen

May 15, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Black screen


Had the same problem. Purchased Haier 42" model 42EP24S from Sears and it broke in 1 1/2 years. Couldn't find anyone to fix it so I ordered part Service Kit: TV-3940-01 from www.searspartsdirect.com the cost was $150.00. If your warranty is up and you're okay with doing your own work. :-)

Replaced 3 boards (instruction included) and my tv is back in action.

May 09, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Haier Plasma


Had the same problem. Purchased Haier 42" model 42EP24S from Sears and it broke in 1 1/2 years. Couldn't find anyone to fix it so I ordered part Service Kit: TV-3940-01 from www.searspartsdirect.com the cost was $150.00. If your warranty is up and you're okay with doing your own work. :-)

Replaced 3 boards (instruction included) and my tv is back in action.

May 05, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

2 Answers

Haier Plasma TV problem


My experience with a Haier Plasma 42EP24S is that they have weak software chip that goes bad and can cause a number of symptoms from picture with no sound, will not recognize video inputs, or my current problem tv turns on and off irratically.  This is the second time i have replace this chip, which is the socketed chip on the vga/component/dvi input circuit card.  Last time i had this problem i ended up fixing it myself because sears took over 3 weeks and still could not figure out the problem.  I am working on obtaining this chip, probally get about a dozen so if anyone thinks this may fix there problem as well i my have some for sale.  michael@malobicky.com of Malobicky Digital Systems.

Oct 07, 2007 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Haier 42EP24S 42 in. EDTV-Ready Plasma Television Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Haier Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...