Question about Kenmore Elite Oasis 27052 Top Load Washer
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sound like the rps kit is required and is time comsuming will have to remove the back and console includes harness and new rps sensor and inset for sensor if not sure if you can perform it would be better to call service tech....must remove from the bottom of the motor location(main drive d/c motor)
Posted on Aug 19, 2009
See the following Whirlpool Service Manual for their Cabrio washer. It's the same machine as the Kenmore Oasis,
Posted on May 11, 2010
Simply attach both wires from the switch to jumper.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
Posted on Sep 11, 2010
Disconnect your Kenmore Oasis washing machine from its power source. Make sure that your washer is unplugged before beginning to disassemble it.
Remove the screws that hold the control console to the top of your Oasis washer. In some Kenmore Oasis models, the two screws may be covered by plastic end caps. After removing the screws, set them aside until you are ready to replace them.
Flip the console up, back and out of the way.
Locate the cabinet clips on the top of your Kenmore Oasis washer. These clips are located toward the back of the washer top and would be hidden by the console if it were not currently flipped up.
Slide your screwdriver underneath the metal cabinet clips. Wiggle the screwdriver back and forth to gently pry the cabinet clips free.
Disconnect the group of colored wires that plug into the top of the washer from the control console. These wires control the lid switch on your Kenmore washing machine. To disconnect, grasp the white plastic clip and pull gently.
Remove the washing machine cabinet. Tilt the cabinet towards you, and then lift the entire cabinet up and off of its platform.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question
Posted on Sep 30, 2010
Hello, Welcome to FixYa.
Hopefully the info below will supply you with the assistance to get the top up (and more) on the Oasis washer.
The first thing I'd do is this...
**unplug the washer...most important and safety first**
1) this is best done with a puddy knife or something similar to depress the clips on both sides, i.e. (these tops are quiet heavy and the lid has heavy springs so be careful...leave the top in the "up" position until you can rest the entire top against a wall or something to allow you to work un-impeded as shown below as well )
Lean it back if possible...watch that lid again, those springs are heavy duty.
Once to this position you should be free to investigate or perform whatever service you had hoped to perform.
Let me know if you have any questions or if anything is not clear and I'll see what I can do. Good luck.
Thank you for choosing fixYa today, please take a moment to rate the info and the assistance you received here at FixYa today.
Posted on Oct 29, 2011
Tips for a great answer:
Aug 25, 2016 | Kenmore Elite Oasis 27052 Top Load Washer
Sep 17, 2011 | Kenmore Elite Oasis 27052 Top Load Washer
Aug 22, 2011 | Kenmore Elite Oasis 27052 Top Load Washer
Jun 23, 2010 | Kenmore Elite Oasis 27052 Top Load Washer
Jun 16, 2010 | Kenmore Elite Oasis 27052 Top Load Washer
Jun 11, 2010 | Kenmore Elite Oasis 27052 Top Load Washer
Apr 24, 2010 | Kenmore Elite Oasis 27052 Top Load Washer
Aug 03, 2009 | Kenmore Elite Oasis ST 6806 Electric Dryer
May 17, 2009 | Kenmore Elite Oasis 27052 Top Load Washer
May 11, 2009 | Kenmore 24032\24036 Top Load Washer
105 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: