Question about Computers & Internet

1 Answer

Hello. My acer aspire one laptop is locked up in a circle on acer erecovery management. I hit restore to factory default, it begins the process and then says partition fail to be formatted then it says cannot format object drive press ok to return so i hit ok and laptop restarts itself and starts the same process all over again. Plz help

Posted by on

  • 2 more comments 
  • max carson
    max carson Oct 29, 2012

    Unplug Remove batt. Replace batt. plug in. Try again. If fails start in safe mode. Question: are you trying to do a factory restore?

  • jimM Oct 29, 2012

    Are you using recover disk(s) or are you using a recovery partition?  Please tell me you are using recovery disk(s) because it shound like you need to replace the Hard Drive and reload.

  • Gwen Welch Oct 29, 2012

    um oh dear im gonna say recovery partition because there is no place on my laptop for a disk

  • Gwen Welch Oct 29, 2012

    max.....ive tried to remove/replace battery and it was no help. Yes im trying to perform a factory restore.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 7,627 Answers

Can you access the recovery mode using a F key, mine is F8 before it enters boot sequence. as in Cold Start and Tap, Tap, Tap. try this procedure:http://www.ehow.com/how_6920216_reset-aspire-one-factory-settings.html if you haven't.

Posted on Oct 29, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
xCAUSALITYx
  • 210 Answers

SOURCE: d2d recovery

Hi,

Unfortunately once your original HDD has been replaced you lose all e-recovery features and there is no-way this can be reversed.

If you could get hold of the image from your old drive you maybe able to write it to your new, its a bit messy though.

The main reason for the "factory default image backup" you have not working now is because a snapshot of the C: drive is stored on D: drive so when you replaced the drive itself you basically made that disc useless for eRecovery features.

Sorry its bad news.

Cheers

Posted on Jun 17, 2008

  • 11 Answers

SOURCE: Acer laptop restarts repeatedly to acer erecovery management environment

did you reformat the hard drive first?if not then you needed to ensure that you selected 'repair' first.

Posted on Jun 29, 2008

zohail
  • 1223 Answers

SOURCE: Acer eRecovery Wont Work

ok u can restore ur notebook to factory defaults without disk like this

Acer: When you first turn on the laptop and see the Acer logo screen, hold the ALT key and press the F10 key (you need to do this before the Acer logo disappears).


pls rate me FIXYA !! or ask for more help

Posted on Apr 04, 2009

joecomputer
  • 92 Answers

SOURCE: Black screen NTDLR Press any key to restart

It sound like your hard drive has crashed. There is no easy solution to your problem. Here are a couple solutions. You need to run a "chkdsk". It will scan and fix file problems on your HD. To do this you can either download a boot disk like "Ultimate boot disk" or you can take the HD out of your laptop and attach it to another computer. Neither of these are easy, for the boot disk you need to have software that can burn a "iso image" to a cd and to attach the HD to another computer you have to have the proper adapter. I would be happy to walk you through either one of these, just let me know. The easist thing to do would be to contact Acer and get recovery cds then go buy a new hard drive. I would take the old one to the store, to be sure I got the right replacement HD.

Posted on May 27, 2009

VinayT
  • 1884 Answers

SOURCE: I got an Aspire One netbook from Acer. I had

go tot Start->All Progs->Accessories->System Tools->restore. and restore the notebook to the earliest date (shown in bold numerals) possible.

Posted on Sep 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Restore aspire 5610


Hi Fentylfc,

  • Click "Start" menu.

  • Click "Programs."

  • Click "Acer Recovery Management."
  • Click the "Restore" button on the bottom of the dialog box that opens.
  • Click "Restore System to Factory Default."
  • Click "Yes" in the warning dialog box which asks if you wish to continue the recovery process.
  • Click "Start" to restore the computer to the default factory settings
  • If you are unable to access the Start menu, use the recovery CDs that came with the computer and always make a back-up CD before restoring a computer to factory defaults. Good Luck...

    Feb 15, 2011 | Acer Aspire 5610 Notebook

    2 Answers

    I have an acer aspire 5310 laptop and want to restore to factory settings can you help me please


    Hi Friend, Please try the following steps:
    Instructions
    Things You'll Need:
    Acer PC or laptop
    Step 1:
    Click "Start" menu.
    Step 2:
    Click "Programs."
    Step 3:
    Click "Acer Recovery Management."
    Step 4:
    Click the "Restore" button on the bottom of the dialog box that opens.
    Step 5:
    Click "Restore System to Factory Default."
    Step 6:
    Click "Yes" in the warning dialog box which asks if you wish to continue the recovery process.
    Step 7:
    Click "Start" to restore the computer to the default factory settings.


    NOTE: Please make sure to backup all the data from the system before resetting it to factory settings

    Please let me know if these steps were of any help

    Dec 09, 2010 | Acer Computers>Laptops Aspire 5610-2013 PC...

    2 Answers

    How can i make factory setting for Aspire 5610 without recovery disc and/or with recovery disc


    Hi,

    You do not have to make factory setting, infact you can restore the computer back to factory default,to do so, follow the below steps: Turn OFF the computer, now as soon as you hit the power button, keep on holding "Alt" key & keep on tapping "F10" key, i.e Alt+F10 (try both), it will open the recovery console, select full factory restore and follow onscreen instruction. NOTE: This will erase all the datas on the computer.

    Thanks and regards,
    Anil.B.R

    Aug 18, 2010 | Acer Aspire 5610 Notebook

    1 Answer

    Restore to factory default


    Unlike other laptops, Acer notebook/laptops integrate a computer management utility called 'Acer eRecovery Management' to create backup of hard drive data, create restore point, reinstall applications & drivers, and reset Acer Aspire 4315 to factory setting.

    Step 1: Before starting your Acer Aspire 4315 laptop, ensure that there is no external storage device attached to it. Now start your laptop.

    Step 2: Press 'Alt + F10' when the laptop starts booting, and wait for a moment while Windows loads the reset files.

    Step 3: When 'Acer eRecovery Management' window appears, select 'Restore System from factory default' and click 'Next' to continue.

    Step 4: Again click 'Next' to reset your Acer laptop. This process will erase all data from your hard disk and reset your Acer one to original factory settings.

    Step 5: Click 'OK' in the notification window to begin the the resetting operation. Now wait while your Acer Aspire 4315 is reset to factory settings.

    Tips: You can also create a backup copy of your notebook data before factory reset. Simply click 'Backup' in 'Acer eRecovery Management' window.

    If you face any issue with your Acer Aspire 4315 Notebook/Laptops/Desktop, feel free to get expert technical assistance at
    http://www.vtechsquad.com/acer-support/

    Jul 26, 2010 | Acer Aspire 4315 Notebook

    3 Answers

    Restore factory settings to acer aspire laptop


    Restore and recovery
    The restore and recovery features allow you to restore or recover the system
    from a factory default image, from a user created image, or from previously
    created CD and DVD backups. You can also reinstall applications and drivers for
    your Acer system.
    1 Press <Alt> + <F10> or select Acer eRecovery Management from the
    Empowering Technology toolbar to start Acer eRecovery Management.
    2 Switch to the restore and recovery page by selecting the Restore button.
    3 Select the backup point you would like to restore from. You can also
    choose to recover the system from a factory default image, recover from a
    previously created CD/DVD or reinstall applications and drivers.
    4 Follow the instructions on screen to complete the process

    Jul 15, 2010 | Acer Aspire 5050-3242 Notebook

    2 Answers

    How do you restore an acer 5738 to its factory settings


    Unlike other laptops, Acer laptops integrate a computer management utility called 'Acer eRecovery Management' to create backup of hard drive data, create restore point, reinstall applications & drivers, and reset Acer laptop to factory setting.

    Step 1: Before starting your Acer laptop, ensure that there is no external storage device attached to it. Now start your laptop.

    Step 2: Press 'Alt + F10' when the laptop starts booting, and wait for a moment while Windows loads the reset files.

    Step 3: When 'Acer eRecovery Management' window appears, select 'Restore System from factory default' and click 'Next' to continue.

    Step 4: Again click 'Next' to reset your Acer laptop. This process will erase all data from your hard disk and reset your Acer laptop to original factory settings.

    Step 5: Click 'OK' in the notification window to begin the the resetting operation. Now wait while your Acer laptop is reset to factory settings.

    Tips: You can also create a backup copy of your laptop data before factory reset. Simply click 'Backup' in 'Acer eRecovery Management' window.

    If you have any other issue with your Acer laptop/desktop/Notebook, fget technical assistance at
    http://www.vtechsquad.com/acer-support/

    Feb 23, 2010 | Acer Aspire 5720 Notebook

    2 Answers

    How can i restore a acer aspire one d150


    Hi , maybe this might work for your acer,
    Go to acer recovery.This can be done by hitting Alt & F10 together as soon as the computer starts.
    Hit hard disc recovery.
    Follow the instructions and this will format the drive and reinstall the factory settings. hope this helps

    Dec 03, 2009 | Acer Aspire One D150-1587 Netbook

    2 Answers

    Restore Acer Aspire One AOA110-1588 PC


    There are two way's you can restore your laptop,

    When you power on your laptop the acer splash screen pop's up, at that time press the -Alt- key and F10 key at the same time,
    at the eRecovery Management menu it should ask you how you want to restore, click on the restore option, or

    From the window's desktop click on start, then all program's, then acer Empowering Technology, click on Acer eRecovery Management, create a password, click on restore, then click on restore system to factroy default.

    Apr 14, 2009 | Acer Aspire One AOA110-1588 Notebook

    3 Answers

    Acer laptop restore factory settings?


    If windows is running you can start it by going to Programs, Acer Empowering Technology and run the Acer eRecovery Management. Note that on the bottom of the eRecovery Management window are 3 choices, Backup, Burn Disk and Restore. Click on Restore. Here you have the choice of select Restore System to Factory Default.

    If windows is not working but the system boots -
    Reboot the system and when the Acer logo appears, hold down the ALT key and press F10. This starts the recovery process, just follow the instructions.

    Oct 19, 2008 | Acer Aspire 5050-3242 Notebook

    Not finding what you are looking for?
    Computers & Internet Logo

    Related Topics:

    47 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Computers & Internet Experts

    Doctor PC
    Doctor PC

    Level 3 Expert

    7733 Answers

    kakima

    Level 3 Expert

    102366 Answers

    David Payne
    David Payne

    Level 3 Expert

    14161 Answers

    Are you a Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...