Question about Intel Desktop Board D875PBZ (BOXD875PBZLK) Motherboard

1 Answer

Upgrade to an AGP Graphics card

I am running an intel D875PBZ motherboard with an intel pentium 4, HT, 3.0GB 800MHZ processor. I curently have a geforceFX5200 PCI card installed, and I want to get more performance by upgrading to an AGP graphics card.

my motherboard supports 1.5v or 0.8v, and either 8x, 4x, or 1x (AGP 3.0),
and I have a 450 w power supply.

I understand that this is older hardware, but I am hoping that I can still find a better graphics card that is compatible with my system.

Any help you can provide will be much appreciated.

Posted by on

  • hes61 Jan 06, 2009

    Hi Mike,

    Thank you very much for the push in the right direction.

    I really appreciated the info on ATI Radeon products, and the examples of the various AGP cards you provided.



    I am obviously a novice, and your help was tremendous!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,351 Answers

Hi hes61, have you ever been to TigrerDirect? Here is an AGP 8x 1.5v card.
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1892411&CatId=318
& this card
http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4297004&CatId=318
Here is the hole page of AGP cards from TigerDirect.
http://www.tigerdirect.com/applications/category/category_slc.asp?CatId=318&name=AGP&

The 3.0volt AGP cards are much older. All these voltages refer to the AGP slot. Many AGP cards support the 1.5v AGP slot & some AGP cards may need more power. The AGP cards that need more power to run will have a power port. Some use a power port just like a floppy disk drive & others will use a standard 4-pin power plug just like a hard disk drive. It varies between cards & some may not need the extra power.

Good luck hes61!
Thank you for using fixa.
Mike

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Specs on this cpu process


MicroStar International (Inc) Support > 865PE Neo2-P Platinum Edition (MSI MS-6728) Main Support page,

http://www.msi.com/product/mb/865PE-Neo2-P-Platinum-Edition.html

Click on Specification
(Overview / Specification / Download / Support / etc)

CPU (Processor) Support;

1) Intel Pentium 4 processors that have;

A) Use a Socket 478 processor socket,

http://en.wikipedia.org/wiki/Socket_478

B) Northwood Core, or Prescott Core

C) Front Side Bus (FSB) of 400MegaHertz (400MHz) for Intel Pentium 4 processors that are based on the Northwood Core.

D) FSB support of either 533MHz, or 800MHz, for Intel Pentium 4 processors based on the Prescott Core.

Processors that have an 800MHz FSB can be used, that have UP TO a 3.6GHz frequency rate. ('Speed')
Indication that higher 'speeds' can be supported. (Overclocking?)

Now let's look at Intel Pentium 4 processors, that are based on the Northwood Core, and fit a Socket 478 processor socket,

http://en.wikipedia.org/wiki/List_of_Intel_Pentium_4_microprocessors#Northwood_.28130.C2.A0nm.29

(Front Side Bus = FSB
The M/Ts listing means MegaTransfers per Second.
Believed to be a more accurate method of stating the FSB, than MHz.

MegaHertz
Mega = 1 Million
Hertz stands for Cycles per Second. Was named after a man with the last name Hertz.
Example; 400MHz = 400 Million Cycles per Second )

Intel Pentium 4 processors based on the Prescott Core, and utilizing the Socket 478 processor socket,

http://en.wikipedia.org/wiki/List_of_Intel_Pentium_4_microprocessors#Prescott_.2890.C2.A0nm.29_2

sSpec Number will be on the processor, as well as the Part Number.

http://www.cpu-world.com/CPUs/Pentium_4/index.html

Scroll down for photos.

CPU support can be attested to looking at the specs for the motherboard chipset, on your motherboard.

The motherboard chipset is an Intel 865PE chipset.
Intel 82865PE northbridge chip, and an Intel ICH5 southbridge chip.

http://en.wikipedia.org/wiki/List_of_Intel_chipsets#Pentium_4_chipsets

Scroll down to 865PE in the left column.

The part number on the Intel ICH5 southbridge chip, is Intel 82801EB,

http://en.wikipedia.org/wiki/List_of_Intel_chipsets#Southbridge_8xx_chipsets

The Northbridge chip of the motherboard chipset, handles the Faster capabilities of a computer.
Processor (CPU), Ram Memory, and HIGH-speed graphics.

HIGH-speed graphics is the AGP technology, or PCI Express technology.

Using a graphics card in a PCI slot, or using Integrated Graphics; is NOT high-speed graphics,

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

The Slower capabilities of a computer are handled by the Southbridge chip.

If this is a question of what CPU is on your motherboard at present, and the motherboard is in a working computer, suggest use the free tiny program CPU-Z from CPUID.com,

http://www.cpuid.com/softwares/cpu-z.html

Need to know how to download, install, and use CPU-Z, post back in a Comment.

Regards,
joecoolvette

Nov 11, 2012 | Micro Scooter MS-6728 Micro Microstar Msi...

1 Answer

Required Intel SL9CB Pentium, 3 GHz compatible motherboard


http://en.wikipedia.org/wiki/List_of_Intel_Pentium_4_microprocessors#Prescott_.2890.C2.A0nm.29

Pentium 4 HT, Model 531. sSpec number SL9CB.

OK. So far I know you need a motherboard that has an LGA 775 processor socket; needs to support Intel processors that are Single-Core, and with an 800MegaHertz Front Side Bus.
(800MHz FSB)

Ram Memory? Dunno. K
Do know the rule of thumb is, that the Ram Memory typically operates at Half of the processor's FSB.
Therefore can only assume the ram memory is DDR Sdram, and operates at 400MHz. (PC-3200)

You haven't stated the motherboard chipset that was used, OR what computer manufacturer, and model number; this mobo came out of.
(MOtherBOard)

Also didn't state if you are using a graphics card, and what kind it is.
(PCI, AGP, or PCI Express)

This isn't a 'guess-ti-mate'. Exact specifications are required in order to replace the motherboard.
Otherwise you may not be able to reuse the Ram Memory, or graphics card. (IF used)

Awaiting needed information. Post back in a Comment.

Regards,
joecoolvette

Oct 30, 2012 | Intel SL9CB Pentium, 3 GHz

1 Answer

Dell dimention 2350 socket 478 I upgrade celeron 2.0Ghz to pentium 4 3.0Ghz 530 The Bios show me the speed 1.5Ghz. Bios A02


The Dell Dimension 2350 Desktop PC motherboard, has an Intel 845GL motherboard chipset,
mounted to it. (System Information),

http://support.dell.com/support/edocs/systems/dim2350/specs.htm#1101572

Here we see that the Intel 845GL chipset supports processors, with a -> maximum <- Front Side Bus of 400MegaHertz, (FSB = 400MHz max.),

http://en.wikipedia.org/wiki/List_of_intel_chipsets#Pentium_4_chipsets

The Intel Pentium 4 model 530 (3.0GHz. Also has Hyper-threading Technology. HT), operates with a FSB of 800MegaHertz, (FSB = 800MHz),

http://en.wikipedia.org/wiki/List_of_Intel_Pentium_4_microprocessors#Prescott_.2890.C2.A0nm.29_2

(Scroll down. Pentium 4 HT 530 )

You can't make the Intel 845GL chipset support a processor with an 800MHz FSB.
BIOS update or not, the voltage range will be too low. Therefore the FSB is low. Changing just the Multiplier will not do the trick either.

(BIOS Setup, Advanced Chipset Setup. Doubt the options of changing the FSB, and/or Voltage, and/or Multiplier, is available with that BIOS program))

Note your 3.0GHz processor is operating at 1.5GHz?

Max FSB supported is 400MHz, and your Model 530 needs 800MHz? (For max operation)

Post additional questions in a Comment.

Regards,
joecoolvette


[ Chip and Chipset are shortened terms for I.C.
Integrated Circuit,

http://en.wikipedia.org/wiki/Integrated_circuit

The motherboard chipset technology used for your computer, has a Northbridge chip, and a Southbridge chip.

(Does not apply to motherboards that support the Intel Core i3, Core i5, Core i7, and Core i9 processors )

The Northbridge chip handles the faster capabilities of a computer.
Processor, Ram Memory, and High-speed graphics.

[ The AGP technology, and the PCI-Express technology, is High-speed graphics.
Using a graphics card in a PCI slot, or using Integrated Graphics, is NOT High-speed graphics ]

The Southbridge chip handles the slower capabilities of a computer.
Anything connected to the PCI bus, (Such as a PCI graphics card)
IDE (PATA)
SATA
USB
Ethernet
Audio (Sound)

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

[ CPU stands for Central Processing Unit. Another term used is Microprocessor, or Processor for short ]

So it is first up to the Northbridge chip, of the motherboard chipset, whether it will support a certain processor, THEN if a BIOS update will help.

Nov 12, 2011 | Dell Dimension 2350 PC Desktop

2 Answers

What processor can use to upgrade my Pentium 4 2GHz in my HP M1270


HP Media Center M1270n desktop PC?

Here are the Product Specifications,

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00280666&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&lang=en&product=443756

Here is the Motherboard Specifications,

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00297771&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&lang=en&product=443756

The Asus PTGD1-LA motherboard, is a Proprietary motherboard, made Especially for HP.
HP's name is PufferM-UL8E

You won't find it on the Asus Support website.

Fortunately, HP listed basic information for CPU (Processor) Support.

When you look to the right of the CPU/Processor heading, you can see it states -
A) Socket LGA 775 (Processor socket)

Looks like this,

http://en.wikipedia.org/wiki/LGA_775

Processors that fit this processor socket, have the socket holes.
775 of them.
The LGA 775 processor socket, has the pins that go up into the socket holes of the Processor.
775 of them.

[The Socket 478 processor socket, that was before the Land Grid Array 775 processor socket, has the socket holes (478), and the processors that fit this processor socket, has the pins. {478 of them]

B) Supports processors with up to a 3.8GigaHertz frequency rate.
3.8GHz.

['Speed' is a slang term for Frequency Rate.
Giga = Approximately 1 Billion
Hertz stands for Cycles per Second.

3.8 Billion Cycles per Second.
Can also be stated as 3800 MegaHertz.
Mega = approximately 1 Million ]

C) Can support Intel Pentium 4 processors with HT.
Hyperthreading Technology.

D) Looking to the right of the Front-side bus (FSB) heading, you will see it states -
800MHz.

This means the Asus PTGD1-LA motherboard will support Pentium 4 processors with,
1) HT
2) UP TO a 3.8GHz frequency rate
3) Up to a FSB frequency rate of 800Megahertz.
4) Use an LGA 775 processor socket.

Now let's look at one example, of a chart of Pentium 4's with HT, that fits these specifications,

http://en.wikipedia.org/wiki/List_of_Intel_Pentium_4_microprocessors#Prescott_.2890.C2.A0nm.29_2


See the heading - Prescott (90nm)?
This means the processors in this chart, are based on the Prescott Core, and the 90nm architecture.

(nm stands for NanoMeter. Approximately 1 Billionth of a meter)

Looking at the headings in the chart, you will see Model Number, sSpec Number, Frequency, L2-cache, Front-Side Bus, Multiplier, Voltage, TDP, Socket, Release Date, Part Number/s, and Release Price.

At this point I would only concern myself with the,
Model Number, (If applicable),
sSpec Number,
Frequency,
FSB, (Front Side Bus),
Voltage,
Socket,
and Part Number(s)


1) Model Number:
The older Intel Pentium 4 HT processors did not have a Model Number.
Intel didn't start using a Model Number until later.
Model Number examples start with 517, 520, 520J, and so on.

Look for the sSpec Number, and the Part Number, for the older Pentium 4 HT's. They're printed on the top of the processor's case, and should be listed by the seller.

2) sSpec Number:
Intel brought this out.
Their way of marking a processor.
Another identifier for you to use.

3) Frequency:
The Maximum frequency rate, ('Speed'), that the Processor is supposed to be able to operate at.

4) L2-cache:
The small memory area for the Processor. The Processor accesses this small memory area first, because it operates at the same frequency rate as the Processor.

You can't change it, and 2MB of L2-cache, is the largest size for an Intel Pentium 4 with HT.
Just thought I would include this information.

(Ram Memory is next. Typically, Ram Memory operates at half of the FSB frequency rate. The Harddrive is next)

5) Front-Side Bus (FSB):
The frequency rate that the Processor transfers data (Information) to the Northbridge chip, and back from the Northbridge chip.
More on the Northbridge chip in a moment.

6) Voltage:
Pretty self-explanatory. The Voltage range the Processor will use.
You need the Voltage range of 1.25/1.4 Volts.
(1.25 Volts to 1.4 Volts)

Any Processor (That is Intel Pentium 4 HT, Socket LGA 775), that uses Voltage in this range will work.

7) Socket:
The type of processor socket that the Processor will fit in.
Has to be LGA 775.

8) Part Number(s)
Self-explanatory again.
The Part Number, that is stamped on top of the Processor's top case.

Part Number(s) is listed, because there may be more than one Processor in the Model Series, that fits the same specifications.

If there is no Model Number, refer to the sSpec Number, or Part Number.

The largest frequency rate (Speed) of Processor you can use, is a Pentium 4 HT that operates at 3.8GHz. (And fits in an LGA 775 processor socket)

Barring that a Pentium 4 at 3.8GHz cannot be found, you will know what Processors you Can use.

Scroll across the headings with your eyes, and start under the Frequency heading.

Find the frequency rate ('Speed') you wish to try.

Go across to the Front Side Bus heading. You should look for a processor listed that has an 800MHz listing.

Look at the Voltage.
All of the Intel Pentium 4 HT processors that fit in an LGA socket, use an 800MHz FSB, and are in THIS particular chart, fall within the same Voltage range.

Keep the Voltage range in your mind, as you look at the other charts below this one.

Socket.
You know you need a processor that fits in an LGA 775 socket.

Look at the chart below this Prescott Core (90nm) example.
Prescott 2M Core (90nm)

Use the above criteria above in this chart.

I wouldn't recommend any Pentium 4 HT's, in the Cedar Mill (65nm) chart.
It isn't that the architecture is smaller (65nm), but that the BIOS program,and version on your motherboard, may not be able to handle these processors listed.

I also do not see a BIOS update for one, and for two, if you make a mistake when performing a BIOS update, your motherboard becomes an expensive Frisbee, or doorstop.

You also do not want any of the processors listed under the Pentium 4 Extreme Edition heading.
$$$$$$$$$$$$$$$

(Mobile Processors are for laptops Laptops are M-O-B-I-L-E)


Northbridge chip.

1) The Northbridge chip, and the Southbridge chip make up the motherboard chipset.

(Does not apply to the new motherboards that support the Intel i3, i5, and i7 Core processors)

2) Chip and Chipset are slang terms for I.C.
Integrated Circuit.

http://en.wikipedia.org/wiki/Integrated_circuit

The Northbridge chip handles the faster processes of the computer.
Processor, Ram Memory, and High speed graphics.

(AGP or PCI Express. Not a graphics card in a PCI slot, nor Integrated Graphics on the motherboard. These are slower processes of the computer)

http://en.wikipedia.org/wiki/File:Motherboard_diagram.svg

(CPU = Processor
Memory Slots = Ram Memory slots)

Looking at the diagram, you can see the slower processes handled by the Southbridge chip.

Looking back at the Motherboard Specifications, look across from the Chipset heading.

Northbridge: i915P graphics and memory controller hub
(MCH)
Southbridge: ICH6 Intel I/O Controller Hub 6

Uses an Intel 915P Northbridge chip, and an Intel ICH6 Southbridge chip.


Jun 27, 2010 | HP Media Center m1270n (PP132AA#ABA) PC...

2 Answers

I have a dell dimension 4600i. I want to upgrade


It should.. Here is a link to documentation.

http://support.dell.com/support/edocs/systems/dim4600/en/4600/sm/specs.htm

Apr 28, 2010 | Dell Dimension 4600 PC Desktop

1 Answer

What type of motherboard for HP Compaq dc5700


The motherboard that you have is : yale-UL6E,

  • view the manual:
    yale_manual.pdf (300 KB)
  • micro-atx form factor
  • Intel Pentium 4 HT processor
  • Intel Celeron processor
  • Socket 478
  • 800/533/400 Mhz front side bus
  • Intel 865-PE chipset
  • 4 DDR-DIMM slots for single or dual channel configurations
  • supports PC2100 (266 Mhz), PC2700 (333 Mhz), PC3200 (400 Mhz) DIMM modules
  • graphics: uses AGP card only
  • audio: integrated AC97 audio
  • lan: integrated 10/100BT ethernet
  • 1 AGP 4x/8x slot
  • 3 PCI slots
  • 8 USB ports (2 headers for 4 possible front I/O, 4 on back I/O) *
  • 2 IEEE 1394 ports (1 for front I/O, 1 on back I/O)
  • connectors for front headphones and microphone

Dec 14, 2009 | HP Computers & Internet

1 Answer

Is my mobo compatible with a 256 mb 128 bit fx5500 agp video card?


youre motherboad support intel pentium d 800mhz fsb processor and ddr 400, it has built in graphics, yes it will support a 256 128 bit fx5500 agp card, the agp 8x/agp 3.0 enhance graphics performance it support a high bandwidth speeds up to 2.12gb/s its twice faster than agp 4x,

Nov 22, 2009 | EliteGroup 865G-M8 (V1.0) (MB865GM8)...

1 Answer

Can some one please let me know the name of the motherboard supporting Pentium 4 1.5 Ghz processor as well as Intel Core duo series of processors. Thanks, Ajay


The chips to which you refer are incompatible with respect to the socket used for each as well as the fact that Core duo and Pentium 4 1.5 GHz chips are from separate generations, the latter having been obsolescent since 2003. Therefore, there is no single motherboard that supports both, and the Pentium 4, Socket 478 boards can be obtained from various aftermarket sources.

Here is an example of the kind of board you need for your Pentium 4.

$11 to $290 from 21 sellers
ps1.png?v=mmz7gze1hlc ps1.png?v=mmz7gze1hlc ps1.png?v=mmz7gze1hlc ps1.png?v=mmz7gze1hlc ps1.png?v=mmz7gze1hlc 3 reviews
ATA-100, Serial ATA-150, 0 MB / 4 GB (max), DDR SDRAM, Intel 865G, 4 x USB

Prepare for the future with the Intel Desktop Board D865GBF, a platform that is truly a generation ahead. This ATX board features next-generation processor, dual-channel DDR400 memory support, integrated Intel Extreme Graphics 2, an AGP 8X slot, 8 USB 2.0 ports, integrated 6-channel audio and next-generation storage device support.

FEATURES AND BENEFITS

Support for the Intel Pentium 4 processors featuring Hyper-Threading Technology and 800-MHz system bus in the mPGA478-pin package. Also supports the Intel Pentium 4 processors (1.60a, 1.80a, 2a, 2.20 GHz or higher) with 533-MHz or 400-MHz system bus in the mPGA478 package.

Intel 865G Chipset featuring Intel Extreme Graphics 2 using Dynamic Video Memory Technology (DVMT). Low-cost, high-performance graphics solution.

Dual-Channel DDR400 SDRAM support: Four DIMM sockets designed to support up to 4 GB of DDR400 SDRAM memory (also supports DDR333 and DDR266). Flexible support for either single- or dual-channel operation.

AGP 8X/4X graphics interface: Flexibility to upgrade via a high-end AGP graphics card.

SATA150 and Ultra ATA100 connectors: Flexible support of new-generation SATA150 (2 ports) and current generation ATA (2 channels) storage devices. « less

While the board for your Core Duo is widely available now

Mar 26, 2009 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

1 Answer

Compatible graphics card for intel d875pbz motherboardboard


Actually the ATI 8500 agp gard should run just fine on that board use to have the same board and I set it up with this card and it ran great

Jan 03, 2009 | Computers & Internet

1 Answer

Upgrading Processor & Graphics card


The Intel® 845G chipset is optimized for the Intel® Pentium® 4 processor supporting Hyper-Threading (HT) Technology†. It is designed with the high performance 533/400 MHz system bus and integrated high-speed USB 2.0.

Max Cpu
Pentium 4 2.8ghz with a 400mhz FSB and
Pentium 4 2.63ghz with a 533mhz fsb

pay close attention when getting your cpu if it has a 533 front side bus and is faster than 2.63 then the actual cpu speed will end up slower (you will see something like 2.1ghz) if it comes on due to multiplier limitations

Dec 14, 2008 | Computers & Internet

Not finding what you are looking for?
Intel Desktop Board D875PBZ (BOXD875PBZLK) Motherboard Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

David
David

Level 3 Expert

778 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...