Question about Kodak ESP 7250 All-in-One InkJet Printer
Error message 3513
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Error message re printhead.
To resolve the error condition:
Posted on Nov 23, 2008
If that error happens every single time you turn on the printer, that pirnthead is faulty.
But if the error only happens some times, try a firmware update from www.kodak.com/go/downloads
Posted on Jul 09, 2008
Unfortunately, the only way to possible fix this error is to get the printhead out and reseat it. You can do that by removing the ink cartridges. Right above where the black ink cartridge was, at the top left hand corner of the printhead, if you push up towards the ceiling there should be a button that releases the printhead. You should now be able to tilt the printhead forward and pull it out of the printer. Reseat the printhead by putting it back in the printer and pushing straight back on the back wall of the printhead. It should snap into place. Replace the ink cartridges and close the printer. If the error clears, download the newest firmware from kodak.com so this never happens again.
If these steps do not clear the error however, call Kodak AiO tech support at 1800 421 6699 to get a new printhead.
Posted on Jul 21, 2008
In regards to the error message with the printhead missing or come loose......I had that issue just shortly after I installed my printer. I was going crazy trying to fix it taking it out and reinstalling which was a pain, removing the cartridges and then the printhead to no avail. Finally I got smart and disconnected the power cord from the printer itself, not directly from the outlet. Once I did that and turned the printer back on the error was gone. It might have been a fluke, but it worked for me, so you might want to try it.
Posted on Aug 30, 2008
Tips for a great answer:
Jan 18, 2016 | Kodak ESP5 AllInOne InkJet Printer
Jan 01, 2016 | Kodak ESP 7250 All-in-One Printer
Feb 26, 2015 | Kodak ESP5250 All-In-One InkJet Printer
Apr 14, 2014 | Office Equipment & Supplies
Nov 14, 2013 | Kodak ESP 7250 All-in-One Printer
Jun 29, 2011 | Kodak ESP 5 Printer
May 01, 2011 | Kodak ESP 7250 All-in-One InkJet Printer
371 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: