Question about GoVideo DV2140 DVD Player/VCR
DVDs will not load. A short time after inserting a disc, I get the message "This disc will not play. Check the disc". Removing and then reinserting the disc sometimes causes it to play properly. I took the cover off of the playwer to see what was happening, and can see that the disc starts to spin slowly and then stops. It will do this a number of times until it gives up and I get the above message. While this is happening, I can hear a "clicking" sound, but can not see what is causing it. When I can get a disc to play properly it spins up very fast. When I see this fast spin up I know it will play properly.This problem happens with all of my discs. Any suggestions on what may be the problem would be appreciated.
Try running a DVD cleaner through it and see what happens. You can get one at Walmart for under $10. If that doesn't do the trick then take it to someone that can open it up to clean it.
Posted on Nov 26, 2007
I have a universal remote from ComCast cabel and was able to get code 0591 to work for the Go Video DV2140. It's one of the same codes as the Zenith DVD player.
Posted on Nov 09, 2008
Your optical pickup drive lens is dirty or needs to be replaced. Run a DVD disc cleaning kit through it and see if that helps. If not, then you have to open this thing up and clean the lens with a bit of rubbing alcohol and then try. If that don't work you can either kick it to the curb or replace the optical lens.
Posted on Nov 13, 2009
Tips for a great answer:
Dec 21, 2016 | GoVideo DV2140 DVD Player/VCR
Jan 04, 2010 | GoVideo Go Video DVD/VCR Combo
Jan 03, 2010 | GoVideo Go Video DVD/VCR Combo
Aug 14, 2009 | Televison & Video
Mar 30, 2008 | Panasonic PV-DF2703 Triple Play 27 in....
Mar 07, 2008 | Televison & Video
Dec 14, 2007 | GoVideo DV2140 DVD Player/VCR
66 people viewed this question
Usually answered in minutes!