Question about Computers & Internet

1 Answer

My sister has a Motorola SP4200 router with a Netgear WPN824v2 wireless router/accesspoint/switch connected to it. Previously she had the SP4200 connected to port 1 (not WAN) port on the Netgear as it is being used effectively as a wireless switch. She had a couple of laptops, and a desktop connected and everything worked fine. My nephew tried to connect his wireless XBox360 yesterday and now nothing works from the Netgear side. Sister can still connect the desktop through the Motorola with no problem proving internet connection ok but Netgear does not want to play ball. Any ideas?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 192 Answers

It might be asking for a WEP password in order for you to use it which is on the botom of the router or the game sistem is the one causing the trouble and should not be conected to any wirless or eathernet internet routers.

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I rename the netgear connection and make it security enabled? I have WG602v2 router


Hi,

Please follow steps to make your network secure and change network name.

1. Connect the computer to 1ST Accesspoint using a Ethernet cable.
2. Open a web browser (Internet Explorer, Mozilla Firefox or Safari).
3. Access the Accesspoint (usually http://192.168.0.227).
4. Login to the Accesspoint (Username = admin Password = Password unless you have changed it).
5. click on Wireless Settings in the left hand side menu under Setup.
6. Change the network name SSID to (any name) and click apply.
7. Click on Security Settings in the left hand side menu under Setup and select Security Type as WEP.
8. Select Authentication Type as Open System.
9. Select Encryption Strength as 64 bits.
10. Under Security Encryption (WEP) Key in the Key 1 box enter the same 10 digit key that was used on the router before.
11. Click Apply.

Hope this will resolved your issue

Thanks for using Fixya

Jun 12, 2010 | NetGear WG602 54Mbps Wireless G Access...

1 Answer

I have a netbook running Windows CE 6.0 and I cannot get it to connect to my Netgear wireless router WPN824v2....


The Netgear wireless router needs the wireless settings configured and then the wireless card in the netbook needs to be configured with the wireless router's settings so it can communicate with the wireless router.
For instructions on setting up and securing your wireless network - please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security

Dec 21, 2009 | Computers & Internet

3 Answers

Netbook Windows ce 6.0 cannot connect to Netgear wireless route


To connect to the Netgear wireless router the Netgear wireless needs to be configured and the wireless card in the netbook needs to be configured with the Netgear's wireless settings.
To configure both the Netgear and the wireless card in the netbook, please follow my instructions - please click on this link :-
http://www.fixya.com/support/r3559128-wireless_router_security

Dec 19, 2009 | Computers & Internet

1 Answer

How can i connect my ipod touch to the netgear maxrange router wpn824v2


Hi,


Follow the steps below to configure settings:

1. Open a browser on a computer connected to the router.
2. Access the router using http://www.routerlogin.com or http://192.168.1.1
3. Username is admin and password is password
4. Click on Wireless settings in the left hand side menu.
5. Under security option select WEP and in key1 type 9876543210 click Apply.


Scan for the wireless network on the Itouch and connect to the network using the password as set above.

Rate it, if it helps.

Anand

Jul 12, 2009 | NetGear RangeMax WPN824 Router

1 Answer

Can't connect Netgear router with ATT DSL


After you hook everything up the first thing you want to do is power cycle everything. So unplug the power cord on the router and the modem, Then plug the modem back in first and once the lights all come back on then plug in your router and once those lights come up i would reboot your PC and see it that helps.

Apr 08, 2009 | NetGear RangeMax WPN824 Router

1 Answer

Setting Up the Netgear WGT624 as a bridge


Just disable the DHCP function of the Netgear router. Connect them from LAN port of 2wire to LAN port of Netgear.

Nov 25, 2008 | NetGear WGT624 Wireless Router

1 Answer

Netgear wpn824v2


Plug your modem into the Internet port on the router, plug in any computers that will be hard wired. Open Internet Explorer and type http://192.168.1.1 This will start up the Netgear install wizard.

May 22, 2008 | NetGear RangeMax WPN824 Wireless Router...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...