Question about Jura Capresso Jura / Capresso Grinder

Open Question

My new capresso coffee burr grinder won't turn on

Following instructions on my new capresso coffee burr grinder 559 - plugged it in - put in 3-4 tab of beans for 1st recommended grin - set fineness selector to 9, put the grind amount selector to 4 - wont to press the on button and nothing happens except a "click"

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 60 Answers

SOURCE: fill beans message keeps coming up on jura capresso impressa s9

You need to open the grinder, it`s probably packed with old fine powdered coffee that blocks the outlet. Clean this out and try again. Since it works normal when you use pre-ground coffee, there shouldn`t be any problems with any other parts.

Let me know if you want a description for have to open and clean the grinder.

Good luck!

Posted on Jun 02, 2009

  • 1 Answer

SOURCE: Jura E9 grinder spins but does not grind

I had a similar problem, and solved it by turning the grinder by hand against resistance. Apparently the grinder wasn't really turning during the cycle and needed to be cleared. If your beans are "hopping" this may be a different problem.

Posted on Aug 14, 2009

Testimonial: "Grinder is turning but old bean oil is clogging it. Stirring beans on next brewing after drying the grinder was also customer services recommendation"

  • 2069 Answers

SOURCE: My Jura S9's grinding unit clogged (due to Peete's beans)

Use the TABLET CLEANING. please refer to this manual here on page 24 if you don't have one.

Regards

Posted on Apr 28, 2010

  • 1 Answer

SOURCE: the upper burr stuck upside down!

Yes, this butter knife trick is the way that Capresso customer service recommends. Just to clarify the tip of the butter knife is the only portion inserted...DO NOT shove the entire blade into the grinder. Just the tip in the furthest to the right side of the "smiley face ****" that is on the top of the grinder without the clear plastic hopper. just imagine a birds eye view. Once you have the tip of the butter knife all the way to the right of the "smiley face ****" then just rotate counter-clockwise until it does not go any further. This should have dislodged the top part of the grinding cone and then simply pick it up with your fingers, flip 180 and put it in the correct way.

Posted on Jul 20, 2010

  • 1 Answer

SOURCE: after removing and cleaning drop-in portion of

First of all the solution IS NOT in the manual. Second of all, you shouldn't go taking the grinder apart. It is soooooooo simple. You just have to rotate the black part where the long **** is counter clockwise until it's at about 2 o'clock. The blade slips right off. I saw a post about someone sending it in for repair for this same problem. It must be a lie because this is not a problem that needs a repair solution. It is a very simple fix. No tools no springs popping out at you, no nothing. Again, Just hold onto the black part with the ****. It moves. Turn it counterclockwise to about 2 o'clock. The blade slips off.

Posted on Nov 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Grinder stopped working today. Tried to clean with no result. Anything I can do to trouble shoot? The timer goes, but no grind...


check to see if the grinder is jammed. Most likely, there was something that's gotten caught in it, and jammed the mechanism.

Feb 27, 2016 | Jura Capresso Capresso Infinity Conical...

1 Answer

Why does ground coffee not go thru shoot


If using Beans; it is set to fine and due to static it sticks - OR you have a blockage..

If you are putting ground coffee into a grinder; the static will be a bigger issue and in addition there is no weight from the beans to press the grinds into the burrs. A bean grinder is not ment to grind beans that have already been ground.

Get a better grinder and do not buy supermarket beans.

May 31, 2014 | Capresso 560.01 Infinity Burr Grinder,...

1 Answer

How to reset the grinder burrs?


I took the grinder apart and found to have to replace the two metal grinding tools (inside cone and outside ring.
The parts for it were quite cheap. Just get yourself a proper instruction how to do it and follow it religiously. There are marks left by Jura engineers to calibrate the grinder assembly. Changing the actual grinder bits inside does not alter these if put together in the same position. The calibration is essential for a decent taste. After 7 years I would recommend a full service anyway. This will not be cheap, but all seals get replaced or just the brewing unit and the machine will be physically cleaned inside. Only a clean machine will give a decent taste. And the usual cleaning and de-scaling you can do is not enough to maintain a squeaky clean machine over the period of a few 1000 cups of coffee.

Mar 08, 2013 | Jura Capresso Impressa Z5 Espresso/Coffee...

3 Answers

Hmm, I have Capresso Infinity Burr Grinder #560, and I accidentally placed the upper burr back in upside down. Now it is stuck. I do not see the "black section with a long slot" around the blade.


Yes! I had the same issue with putting the burr in upside down and then twisting it an effectively "locking" it in there incorrectly. I tried the "knife" solution that worked for some people here, but it was placing the bean container back on and twisting counter clockwise that did the trick!

So glad I found this thread and didn't give up trying to fix my burr grinder (which we love).

Thanks to jaybayca!

Jan 08, 2011 | Jura Capresso 560 Electric Burr Grinder

1 Answer

I accidentally placed the upper burr in upside down. Now it is wedged in and I can't get it out. Any suggestions?


I've posted this in a few other places on this site (there are many ways to ask the same question), but try putting the clear bean container back on and untwisting as if to unlock it -- the problem isn't just that we put the upper burr in upside down, but then we locked it into place with the bean container. More info at http://www.fixya.com/support/t4009992-upper_burr_stuck_upside_down or try Capresso at 800.220.5701.

Jan 08, 2011 | Jura Capresso 560 Electric Burr Grinder

1 Answer

How do I disassemble the grinder and bell for cleaning? We have just bought a new mobile coffee van and the instructions are vague


Grinder bell is only putted inn to upper holder of burr, anyway during time it can jam and seem like it has some block. Some models have one horizontal screw from burr holder to bell, of it is the case you should release it first.

Nov 19, 2010 | Macap Doser coffee grinder - M4

1 Answer

I received a new lower burr grinder part from SAECO for my machine but no instructions on how to replace it. I know how to clean and replace the removable grinder part that fits into this. Do you have...


Hi
If you only got the lower burr it won't work. They should be matching burrs.
If you don't do it right, you will damage the grinder. You need a #10 Torex bit.

Insert the bit into the screw in the middle of a very clean grinder. Turn clockwise to loosen. Once the screw is out, pull the burr out, but be careful. There are ball bearings and springs under the burr. Make sure that everything is clean before reassembly. There are 3 holes in the bottom of the grinder. The springs go into the holes first. Then the ball bearings set on top of the springs. Place the new lower burr on top of the springs. A washer and the corkscrew go in next. Insert the screw in and with the bit in place turn (with a little down force) clockwise until the screw drops into place, then turn counterclockwise. It should turn fairly easy. Once you start putting pressure on the springs, try to turn the corkscrew. There is a notch that it slips into in the bottom of the grinder. Once it locks into place keep turning the screw until you start to turn the burr. That should be tight enough. Now reassemble the top burr and adjust.

May 12, 2010 | Saeco Vienna SuperAutomatica Coffee...

4 Answers

Spring loaded ball bearings - does the ball bearing sit on top of the spring or below the spring??


The ball bearing is a check valve. The ball should be in the input side of the water with the spring underneath.
input side ----->( O/////)-------> output side

Feb 21, 2010 | Jura Capresso Capresso Infinity Conical...

3 Answers

I need a new manual for my Capresso 452 coffeegrinder/maker


Fantastic deal! I'm jealous. I'm on my second one and I paid about $200 each time! Here's the manual

http://www.capresso.com/pdf/inst_coffeeteam_s.pdf

Aug 17, 2008 | Jura Capresso 452.01 Coffee Maker

Not finding what you are looking for?
Jura Capresso Jura / Capresso  Grinder Logo

Related Topics:

354 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jura Capresso Coffee Makers & Espresso Machines Experts

The Knight
The Knight

Level 3 Expert

73635 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Steve

Level 3 Expert

3287 Answers

Are you a Jura Capresso Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...