Question about Hansgrohe Shower 28504 Raindance S 100 Air 3Jet Handshower

1 Answer

Slow flowing hansgrohe shower head - Hansgrohe Shower 28504 Raindance S 100 Air 3Jet Handshower

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 72 Answers

First thing to check is the filter screen at the hose connection on the hand shower. If this screen is clean and there is no debris in the flow restriction device inside the handle end you will most likely need to clean the hand shower spray face. You can remove the unit from the hose and soak the spray face in CLR. Follow the instructions on the container for use and dilution. Soak for no more than 10 minutes at a time. After soaking, rinse the unit well and reconnect to the water source. Run water through it and while running rub the rubber spray channels to further clear up any deposits. Repeat the soaking and cleaning process at least two more times to clear out all deposits that may be limiting your performance. If you need more help feel free to contact me at Hansgrohe. 1-800-334-0455. Press 2 for tech and ask for David Scarborough. I'd be happy to help.

Posted on Oct 30, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 92 Answers

SOURCE: weak flow from head of Hansgrohe 27118 Bodyshower

more then likly one of the strainers (little screen) has some stuff on it where the hose screws onto pull screen and clean.

Posted on Mar 26, 2009

Digital G-pa
  • 9 Answers

SOURCE: leaky handshower hansgrohe croma c100

Grab a wrench and give it at least a quarter-turn. Hand tight isn't enough with a shower, even with teflon tape.

Posted on Mar 28, 2009

blueextc3221
  • 15935 Answers

SOURCE: loss of pressure in Hansgrohe shower panel

Thanks for your question!

I'm sorry that you haven't received an answer yet.

The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...

Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.

Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question

Posted on Sep 05, 2010

HANSGROHE US
  • 7 Answers

SOURCE: I replaced a broken Hansgrohe hand shower with a

Hi Christieb942,

When you get a new hand shower you can sometimes get sediment on the federally mandated FLOW RESTRICTOR. Not screaming, that is ****** in cheek. To CHECK the Flow Restrictor for debris, look at the hose connection end of the hand shower. You will see an INSERTED part that is green, yellow, or white. We have to push that in there to satisfy the EPA requirement for flow. You can pull it OUT and rinse it off. Then connect your handshower and try it and see if it is improved. You will not void the warranty in any way by doing this. I hope you understand what I am telling you, but if not you can call me 800-334-0455. I wish I could answer more directly, but Big Brother has eyes.

Posted on Sep 20, 2011

  • 72 Answers

SOURCE: Hansgrohe clubmaster shower head is dripping

If the shower head is constantly dripping and not shutting off it is more likely to be the valve in the wall that is the issue. You will most likely need to service the valve that is supplying the shower head. If you need any further assistance feel free to call me at Hansgrohe Technical Services at 1-800-334-0455. Press 2 for Tech and ask for David Scarborough.

Posted on May 16, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The water flow from my triton electric shower does not stop even after unit is switched off


28487001 is not an electronic shower head made by Hansgrohe. It is an overhead shower head that has no electronic parts. Triton is a completely different company. If you have an electronic shower system by Triton you will need to contact Triton. If you have a Hansgrohe product feel free to contact Hansgrohe at 1-800-334-0455.

Apr 13, 2013 | Hansgrohe Showerhead Shower Power ...

1 Answer

I need a water restricter


Most manufacturers of faucets and shower heads install flow restriction devices at the factory when building the products. These devices are proprietary in most cases and are made to be difficult to remove and in some cases removal will damge the product. There may be some after market flow restriction devices that are made to be installed between the shower arm and shower head but I am unaware of any specific models or brands. If you need help with any Hansgrohe products feel free to contact Technical services at 1-800-334-0455.

Mar 29, 2013 | Hansgrohe Home

1 Answer

Hansgrohe shower head leaking


If the shower head is constantly dripping and not shutting off it is most likely the valve in the wall not the head itself. How is the head leaking? Where/when does the water show up? Feel free to contact Hansgrohe Tech at 1-800-334-0455. Press 2 for tech. We would be happy to help.

Dec 01, 2012 | Hansgrohe Home

1 Answer

Hansgrohe shower head water leaking out of connector


Is it a Grohe or Hansgrohe shower head? If it is a Hansgrohe shower head the first thing to check is if the self sealing filter gasket is installed at the connection to the shower arm. Hansgrohe shower heads have a black self sealing filter gasket in the head that some people remove assuming it is a flow restriction device. It is only a filter and does not restrict flow unless clogged with debris. Next make sure the flow restriction device below the filter gasket is still installed. On some models removing the flow restrictor will cause water to be expressed from the air injection ports near the pivot ball. Feel free to contact me at Hansgrohe. 1-800-334-0455. Press 2 for Technical and ask for David Scarborough

Aug 20, 2012 | Grohe Home

2 Answers

Hansgrohe clubmaster shower head is dripping


First step is usually just taking off the shower head and apply a descaling solution but make sure you read the intructions for which material it can work on eg brushed nickel.

May 15, 2012 | Hansgrohe 28496821 Clubmaster Shower Head...

1 Answer

How to un-fit Hansgrohe Chroma 3-ways handshower?


Hansgrohe hand showers have filtration sometimes on the inlet side of the hand shower. You must unscrew the smooth conical nut from the handshower to expose the filter and the flow restrictor. If your hand shower is not equipped with a filter gasket, you should use one to protect your hand shower from the particulate.

Filter gaskets can be used at your body sprays and shower head as well if you have them. If you have a Hansgrohe thermostatic valve you don't need the little filter screens, because the valve is filtering the water good enough. We do not recommend opening your handshower for cleaning. There would be a strong chance you may not get it together again, or it may become damaged.

If your concern is with a buildup of lime on the spray faces, you can use a decalcifying agent to dissolve the deposits, but do not soak for more than 10 minutes and then rinse well with clear water.

Best regards,

Phil Heslep
Hansgrohe Technical Support
North America

Jan 08, 2012 | Home

1 Answer

Shower body three way diverter problem, no water to one port


try taking the shower head off and see if there is something stuck in it. sometimes things will come through the water lines and lodge themselves in the valves as well. if the shower head isn't clogged try dismantling the valve that turns the shower head on and then turn the water on when its out and flush the port out.

Jun 11, 2009 | Hansgrohe Axor Hansgrohe Starck Shower...

1 Answer

Weak flow from head of Hansgrohe 27118 Bodyshower


more then likly one of the strainers (little screen) has some stuff on it where the hose screws onto pull screen and clean.

Mar 25, 2009 | Hansgrohe 27118821 Brushed Nickel...

1 Answer

Insufficient hot water from Gledhill pulsacoil 2000


changing the shower head will not do anything.to do what you want,you would need more BTU's or a bigger unit to supply more water,someone may be hogging the water also.

Feb 25, 2009 | Hansgrohe Axor Hansgrohe Starck Shower...

Not finding what you are looking for?
Hansgrohe Shower 28504 Raindance S 100 Air 3Jet Handshower Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hansgrohe Home Experts

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Brad Brown

Level 3 Expert

15451 Answers

 John
John

Level 3 Expert

794 Answers

Are you a Hansgrohe Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...