Question about Dell Wireless 2350 Router

2 Answers

Dell Wireless 2350 Router

Works great bought it used. But someone change my admin password and i have tried resetting with reset button . used different router for 30 days with dell powered down. still cannot get to config screens. works as a wired router fine but have a new laptop and no more ports i needs to set up as wireless have rune the set utility and have it set up secure but can get to config with HTTP://myrouter or asks for password i type admin for user id and admin for password and it always worked before now it says wrong id or password 3 tries then locks me out HELP please wife wants on internet with new laptop and dose not want to listen to kids scream they cant use internet cuase she needs a cable

Posted by on

  • 2 more comments 
  • Custer Feb 22, 2008

    Have used reset button twice but when I try to access Control Utility using default passwor "Admin", it tells me the password is wrong. Any ideas?

  • jamescossey Feb 22, 2008

    default password?

  • Anonymous Jan 03, 2009


  • Anonymous Mar 25, 2014

    Never have set password for wireless router. Purchased new laptop and would like to set a password being using.



2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

Connect one of the router's LAN ports to the computer, no other connections to the router.
Reset the router to factory defaults by holding the reset for 15 seconds with power on.
Reboot the computer.
Start, Run, cmd /k ipconfig
The address of the Default Gateway is the base address of the router, type that into IE to access the setup pages.

Posted on Feb 22, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 113 Answers

I can definitely help you on this, however, this would require us follow a few troubleshooting steps which cannot be dictated here. So, I would request you to initiate a chat session with me from the fixya homepage and we would carry on from there. Cheers

Posted on May 15, 2007


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My Dell 2350 router was working fine and was password protected. I must have messed up the settings because now it is no longer password protected (I can tell because the padlock next to it is now gone.)...


Looks like someone pressed the reset button on your router which caused it to go back to it's factory settings that's why you lost the password.

Click here for the user manual regarding network security setup for your Dell Wireless Router.

Hope this helps! :D

Sep 08, 2010 | Dell Wireless 2350 Router

1 Answer

Default login and password

reset the router buy holding the rest button down for 10 seconds once all the lights start to blink leave it for 20 seconds or more so the lights get stable and then use the default user id admin and password admin
Don t forget to say thanks

Aug 18, 2010 | Dell Wireless 2350 Router

1 Answer

Could you tell me what is the default password for linksys wireless-G? I bought this 6 months ago...

You did not mention which router model you are using (WRT, WAP, etc.), but my first try would be for username/password:admin/admin.

You can also go to this page and find your router in their database.

Note: The default values only work if the router is reset to factory default! If someone had changed the password already, this won't work. To reset the router to factory default, press the small reset button on the back of the router with a pen or needle for about 10 seconds while the router is connected to power.

If you have any more questions, just come back here and leave a comment - I'm happy to help.

Aug 09, 2010 | Linksys Wireless-G Broadband Router

1 Answer

I cant renember the router password and...

Sounds like your router needs to be reset to the factory defaults by pressing the reset button on the back of the router for 4 to 6 seconds.

Here is the link to setting up your router for gaming:

Hope this helps..

Mar 12, 2010 | Dell Wireless 2350 Router

1 Answer

I have a TrueMobile 2300 router and my security code is not working. How can I change it?

The only way to reset the password if you can't remember the old one is to reset the device. To load the Dell TrueMobile 2300 Wireless Broadband Router's default settings, hold down the reset button on the router for at least five seconds. While the unit resets, the Power light blinks.
Then navigate to the router through your browser and Type the following as your username:
Type the following as your password:
Click the OK button.
The Dell TrueMobile Setup Page appears.

Click the Advanced Settings tab.
Click the OK button.
Click the Administration Settings button on the left side of the page.
Put a check in the box to the left of the Change Your Password setting under the section of the page titled Password Settings.
Type the password that you want to use in the New Password field.
Retype your password in the Retype Password field.
Click the Submit button.
Another window appears stating You have successfully submitted the settings to this device!
Click the Save and Restart button.
Your new password will be saved into the router settings.

This will however wipe all your settings!

Jan 05, 2010 | Dell TrueMobile 2300 Wireless Broadband...

1 Answer

My friend ave me a dell 2350 wirless router without the software. i dowbloaded the software and it asks me to put in eser name and password. it's saying its the wrong name and password
Undoubtedly, it's asking for the administrator information. User name is admin and password is admin. The link will show you the default settings for the router should you have to reset it.
Thanks for using . If you liked my answer, please rate it accordingly!

Jan 11, 2009 | Dell Wireless 2350 Router

1 Answer

Forgot my Password

Press the Reset
button for about 10 seconds to reset the router to the defaults,
then use the default user name and password (admin and admin) to access the
Router Setup utility.

Jan 02, 2009 | Dell TrueMobile 2300 Wireless Broadband...

1 Answer

I forgot the user name and password to my Dell Wireless 2350 Broadband Router. How can I retrieve it?

Please look on the back of the router for a small reset button - Press this with a pin or something small and hold it for a few seconds. Then check your router manual or a sticker on the bottom of the router to use the default password for your router

Note: You will have to reconfigure any settings you changed ie port forwarding

Dec 29, 2008 | Dell Wireless 2350 Router

2 Answers


You just need to reset the router.

There should be a small red button on the back somewhere (not the power button, just turning on and off will not work).

once reset, access the admin screens again by going to and entering the default password...which i think it is "password"

Jul 07, 2008 | Actiontec GT704WG Wireless Router...

1 Answer

Disconnection problems

I see. You can try changing the wireless settings of the router. You can do that by accessing the web based utility of the router. Here are the instructions:

1. Click the Start button, and then click Run.
2. Type the following text in the Open box: http://my.router
3. If this is the first time configuring your Dell Wireless 2350 Broadband Router, or if the user name and password have not been changed from the default settings, type admin in the User Name field and admin in the Password field.
4. Click the OK button. The Configuration screen appears.
5. Under the Basic settings, under Wireless Settings change the channel from Auto to 1, 6, or 11.

If that does not work, you can try updating the firmware of the router. You can download the firmware from this site:

Here are the instructions on how to upgrade:

1. Reaccess the configuration page of the router using a wired computer.
2. Click on System Tools, find Firmware Upgrade.
3. Click Browse and search for the firmware you downloaded from the site I gave you earlier. Select it and then start the upgrade. Let the firmware finish its upgrade.

May 21, 2008 | Dell Wireless 2350 Router

Not finding what you are looking for?
Dell Wireless 2350 Router Logo

1,643 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18417 Answers

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides