Question about Philips 47PFL7403D 47 in. LCD TV

7 Answers

Need code for comcast remote control

47" philips lcd tv model 47PFL3603D/F7

Comcast DVR (HD) remote control

I can't find the code to put in for my new TV. I'm getting the run around from cable, who wants me to pay for a service call and have someone come out, and Philips tells me to go to the urc.phillips.com site and ''play around' and I ''might'' find it there!

Posted by on

  • 3 more comments 
  • nancekelly Jan 03, 2009

    That is NOT the solution - we (Comcast and I had already TRIED using the codes in that manual that was written in July 2007 if you look closely at it - it is virtually useless to anyone unless they are looking for a code for an older television.



    I am not.



    This is a brand new model - Comcast does not have the code for it.



    Philips obviously does not either, or they would have given me a straight answer.



    Please folks - let's not give BS responses as ''expert'' answers - I have tried all this - I've been on the phone for days doing this, I just need to know if anyone has THE NEW CODES FOR PHILIPS 47" LCD TVS - not ones that are a year and a half old.



  • nancekelly Jan 04, 2009

    that is NOT the solution either bluextec3221 - as that leads you to the exact July 2007 list that was provided earlier.

    Does anyone here bother to look at the things that they send to people as solutions, or is it all a big race to see how many posts they can answer? I thought I was rather informative about the fact that manual was not of any help and that Comcast and I had already gone that route.

  • nancekelly Jan 04, 2009

    I do not wish to purchase another remote - that was one of the solutions that Philips offered me, and they provided me with that link also. I paid $1100 for this TV - I am not going to go out an purchase a new remote to go with it.



    Comcast said they get their updated codes from the manufacturers, and the codes they gave me were the latest ones that Philips had given them.



    Philips sent me to the exact page that you sent me to ........ supposedly to ''fiddle around'' a bit, and I could ''probably'' find the code that I was looking for. There were approximately 10 remote controls they offered the codes for - with hundreds of codes listed. I called Philips back, and they sent me back there to look at the Universal Remote Controls they offered for sale, and where to buy them. That is NOT the solution either.



    There HAS to be a code in existance for this TV, and someone out there has to have it, but no one is willing to spend the time to find out what it is. Comcast is using the: Philips hasn't updated us yet answer, and Philips is using the: Buy one of our Universal Remotes, or search through our library yourself (which I tried, but there are just too many to even begin to try after you go down the lists for all the model numbers starting at the first - I got half way through before I decided to pay for the "Premium Answers" here at FixYa!

  • Anonymous Feb 16, 2009

    need code for phillips 42" lcd tv

  • Anonymous May 09, 2009

    well the code i used for my philips televion was 10054 it worked only half way though.... volume and power the tv on and off i still cant change channels.



×

7 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,183 Answers

HI,
Could you kindly give the exact model of the comcast remote that you are using.


Thanks
Proton

Posted on Jan 03, 2009

  • 1 more comment 
  • Mandeep  Singh
    Mandeep Singh Jan 03, 2009

    You can try the following codes

    Philips 0035, 0081, 0618



    BUT, according to me this remote is not compatible with the philips TV.







    Thanks

    proton

  • Mandeep  Singh
    Mandeep Singh Jan 04, 2009

    Hi,

    As i wrote before ,my friend , if you could give me the model number of the remote that you have i may try to find a solution. Cause everything on the philips says the remote is not compatible with the TV you are using . So its better to change the cable provider.



    Thanks

    Proton

  • Mandeep  Singh
    Mandeep Singh Jan 04, 2009



    Try adding 1 to the front of the code. "10054"'. Hope this helps

    This code solved problems for a lot of people using the comast remote.





    Thanks

    Proton

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I have a philips lcd tv and have tried for days to get my comcast dvr remote to program my tv. I used code 10054. thanks proton

Posted on Feb 13, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

10054 worked for my 47 inch philips lcd hdtv

Posted on Dec 04, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,239 Answers

Hi nancekelly ,
here are the codes 006,007,010,011
,013,016,033,035

Posted on Jan 04, 2009

  • ABHISHEK.C
    ABHISHEK.C Jan 04, 2009

    check this pdf guide there is full info about programing codes http://www.comcast.com/MediaLibrary/1/2/...

  • ABHISHEK.C
    ABHISHEK.C Jan 04, 2009

    http://www.thompsontv.com/rcarc.html


    and check here http://www.comcast.com/remotes/universal...



    If your home entertainment device does not respond to the remote control after trying all of the codes listed for your brand, or if your brand is not listed at all, try searching for your code.Example: You've tried all the codes for your TV, but you still cannot get the remote control to operate your TV.


    1. Turn on your TV.

    2. On the remote control, press TV once.

    3. Then press and hold SETUP until the TV key blinks twice, then release the SETUP key.

    4. Using the number pad, enter 9-9-1. The TV key will blink twice.

    5. Aim the remote control at the TV and slowly alternate between pressing Power and TV. Stop when the TV turns off after pressing the POWER key. This means that a working code has been found.

    6. Press the SETUP key once to lock in the code. The TV key will blink twice.
    Note: Use the AUX key to program the remote for an audio receiver or DVD player.

    Checking the CodesIf you have set up the remote control using the Searching For Your Code procedure, you may need to find out which four-digit code is operating your equipment. For example, to find out which code is operating your TV:


    1. Turn on your TV.

    2. On the remote control, press TV once. Then press and hold Setup until the TV key blinks twice, then release Setup.

    3. Enter 9- 9- 0. The TV key will blink twice.

    4. To view the code for the first digit, press 1 once. Wait 3 seconds and count the number of times the TV key blinks (e.g., 3 blinks = 3) and write down the number in the left- most TV Code box (at end of this section).
    Note: If a code digit is "0", the selected mode key will not blink.
    Repeat step 4 three more times for the remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit. To check another device code, repeat steps 1 to 5, but substitute the AUX key for the auxiliary device you are checking.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Https://www.comcast.com/corporate/customers/customer_support/remotes.html

there is the link. Since we dont know which remote you have, yuo'll pick it from a list, and go from there.

Posted on Jan 03, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,422 Answers

Posted on Jan 03, 2009

  • Priya darshan Jan 03, 2009

    If you need anymore help let me know..



×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Philips Master
  • 13,433 Answers

Hi

heres the manual for the comcast DVR remote the codes are listed inside
http://www.comcast.com/MediaLibrary/1/2/CM/VanityURL/documents/comcast_dvr_remote_manual.pdf

Posted on Jan 03, 2009

  • Ekse Jan 04, 2009

    If comcast doesn't have a working code for their own product then who will?

    The remote most likely will not function with the set, have you tried code search?

    I would suggest to get another remote
    try one of the urc remotes

    http://www.universalremote.com/consumer/...


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My remote does not work


Remote Code for LCD Coby TV model TFTV2425 - Comcast Help and ...

forums.xfinity.com/t5/XfinityTV.../Remote...LCD-Coby-TV.../916553
Apr 14, 2011 - Remote Code for LCD Coby TV model TFTV2425 ... If your home entertainment device does not respond to the remote control after trying all of the codes listed for your ... I just changed to an hd box andcodes given by comcast did not work. Looked at my old remote notes and that is what I found and it works. Comcast DVR remote won't "select" an input from th...
May 26, 2011
Remote code for coby tvs
Feb 7, 2011
Comcast remote code for Coby tv/dvd
Mar 20, 2010
More results from forums.xfinity.com

Coby tv remote doesn t work Questions & Answers - Fixya

www.fixya.com > Forum > Tags > tv remote doesn t work

Dec 15, 2015 | Coby TFDVD2274 22 in. LCD TV

1 Answer

Need a code for my Sony RM-Y16 Remote to split screen with my Comcast DVR


It is possible that this remote will not program to your Comcast dvr. Your DVR is probably newer than the remote and has new codes that the remote doesn't support. The only thing you can do now, is either purchase a new universal remote that supports both units. or use your Comcast remote to program it to your TV. the Comcast remotes are programmable.

Oct 07, 2012 | Sony RM-Y916 Remote Control

2 Answers

Can't get my hannspree remote to work with comcast


10030 for the comcast dvr remote. Code is from NEC

Oct 02, 2009 | Hannspree HT09 28 in. LCD TV

1 Answer

Need Remote/Device Code for Comcast RNG 200 DVR


je recherche le code pour reprogramme d'une tv internet de model nritv2112 une tv bush

Feb 01, 2009 | Logitech Harmony 670 LCD Remote Control

1 Answer

I have a new TV Model 47PFL3603D/F7 and am hooked up to comcast digital box and cannot figure out how to get my comcast remote to regulate the volume. I have the set on channel 3 and everything works...


Usually on a universal remote (after programmed) the volume is controlled by pressing the cable button then adjusting the volume. When you turn your tv on by pressing tv power---then flipping through the channels by pressing cable--channel up or down. The remote (in my experience usually only controls the volume while in the cable mode)

Jan 10, 2009 | Televison & Video

6 Answers

Philips TV HDMI CEC EasyLink tries to control Cable set top box


I finally found a fix to this! YAY. I thought I might have to return the TV. I have the Phillips 42PFL5603D, but should work for other models.

On the TV press menu picture settings---picture---dynamic contrast (turn off) AND active control, turn off
If you have Comcast Moto box: on the Cable box go menu--->setup--->cablebox set up---RF BYbass set to ON
If you have a non-Comcast Moto Box, I'm sure there is an RF bypass setting in the menu. You'll just have to look for it. Another fix was close saying to only turn of the active control, but it took all 3 of these for it to work consistently. The latter let it work for all of 30 seconds.

Dec 29, 2008 | Philips 42PFL7403D/27 42 in. LCD TV

3 Answers

Help with comcast remote code setup for philips tv


Try adding 1 to the front of the code. 10054 worked for me. Hope this helps.

Sep 27, 2008 | Televison & Video

1 Answer

I need a universal remote control code


I am looking for the White Westinghouse sk26h240s remote codes for a Comcast universal DVR Remote control. any ideas, please email me at renee.walton@comcast.net.

May 29, 2008 | Televison & Video

8 Answers

Program Comcast remote to operate Samsung 46"LCD


Not sure which remote you're using. We have comcast Motorolla box and Samsung LN-T4671F. the code I used was 10812 and it works perfectly.

Go here for more and check the comcast section:
http://www.remotecodelist.com/remotes/

May 18, 2008 | Samsung TV Remote Control

Not finding what you are looking for?
Philips 47PFL7403D 47 in. LCD TV Logo

1,785 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...