Question about Durabrand DVD-1002 DVD Player

1 Answer

No disk We put in a new cvd it goes to loading and than no disk comes up even after using the cleaning disk

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 146 Answers

The drive motor may be bad and the disk is not spinning up or the laser is probably bad and it is not reading the disk.
You may also want to make sure that the disk is firmly on the spindle. The Durabrand players have a stiff spindle and you have to press firmly till it clicks in or it won't spin up, causing the error.

Cheers

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The but does not help. every disk I load says samething even orig disk. Even put recorded on this player. Still says loading and then no disk. Any help appreciated.


Get yourself a cleaning disk from Walmart or an audio or computer retailer. Sometimes the optics get dusty and can't read the start of the disk. They are not expensive and worth a shot.

Sep 19, 2015 | Sansui VRDVD4005 DVD Player/VCR

1 Answer

Shows no disc when there is a disc loaded. Goes through as if it getting ready to load then stops and reads no disc.


  • Hi, I can help.
  • Sounds like the lens is dirty to me. When the lens is dirty it be comes difficult if not impossible for the disk to be read.
  1. Go buy a lens cleaner from Best Buy (or where ever) and put it into your player. These lens cleaners have bristles on them that "sweep" the lens clean.
  2. If real dirty you may have to run it through two or three times to get it to read completely right again.
  3. Sometimes if real dirty you may have to fool with it a bit just to get the lens to read the cleaning disk.
  4. Make sure the disk is the proper format and not scratched too. Disks can be resurfaced at your local video store for just a couple of bucks.
  5. Make sure the disk is from your region.
  • If you do all of this to no avail then it is possible that your lens has come out of alignment and needs to be put back into position. A lens even 1mm out of alignment can mess up the ability of it to read properly.


  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.

Regards, Tony

Aug 22, 2011 | Durabrand 8.5'' Portable DVD Player

1 Answer

I have a toshiba modelsd-p1850sn model it goes on


possibly needs both the disk and the laser iris cleaned. Buy a cleaning kit for about $15 and run the disk in the drive to clean the iris.

please rate my help++++Thanks for using Fixya

Nov 29, 2009 | Toshiba SD-P2000 Portable DVD Player

1 Answer

DVP-NS50P will not load DVD


the lense could be only dirty, try cleaning it first. i suggest do a manual cleaning if you can. open the top cover of the unit, remove the disk retainer and you will find the lense somewhere in the middle. use a cotton bud, use a little of alcohol, dampen a little only and wipe the lense in circular motion. then use new dry bud to dry it.

May 04, 2008 | Sony DVP-NS50P DVD Player

2 Answers

Can't get past LOAD


it might need to be cleand u take the sheild off and take a q tip and lightly clean the laser
pls rank ps keep off the carpit

Jan 23, 2008 | Samsung DVD-VR357

2 Answers

Toshiba Sd2800


I have the same problem with my SD-2800 that Ruska has. Any suggestion how the unit can be fixed?

Dec 09, 2007 | Toshiba SD-2800 DVD Player

1 Answer

Unit will not start or load disc


Try opening up unit and using canned air and blow it out - sometimes simple dirt causes things like this While inside glance and see if you don't have some old tape or bits of labels that have come off and are anywhere inside that might be hanging the various working areas. Try using cd cleaning disk and vhs cleaning tape Without seeing this not sure what is causing it but may be something simple like the dust or pieces of label causing problems or the little rubber "tires" and other rubber components having gotten stretched out and slipping.

Nov 05, 2006 | Emerson EWR20V4 DVD Recorder/VCR

2 Answers

Wont play saying unknown disk


If the region setting is correct and won't even read a cleaning disc, there's not much you can do. Either the DVD drive or the Main board (aka MPEG board) is faulty and will have to get it repaired. I'm not sure about UK, but in Australia, Bush manufacturing warranty period for DVD players is 12 months.

Aug 29, 2006 | Bush DVD2038 DVD Player

Not finding what you are looking for?
Durabrand DVD-1002 DVD Player Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Durabrand Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69845 Answers

matt martin
matt martin

Level 3 Expert

1198 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Durabrand Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...