Question about Samsung HLN437W 43" Rear Projection HDTV

1 Answer

Samsung HLN617W1 picture will not come on

Went out while I was watching last night and would not restart after being left off all night. Remote will not turn off set and have to unplug. Apparently tries to restart, but cannot. Also cannot turn off set unless I unplug. After trying to restart, it stops after several tries and tmer and lamp lights blink. Temp light does not blink or come on. Probably bulb, but also has sound from perhaps fan that has persisted for long time. Set is over three years and out of warranty

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Replacing the projection lamp solved part of the problem. I am still concerned about the sound which is coming either from the fan or color wheel. After it warms up the humming sound seems to greatly lessen. I guess I will just wait that problem out until something drastic happens.

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Good morning Sam. Last night while watching TV the


Hello Andrew, Could I get you to please post the model number and make of the set. I will be better able to assist you.

Dec 03, 2011 | Samsung 56" Slim-Depth LED DLP HDTV

1 Answer

Samsung DLP TV HLN617W1 picture comes on then goes out after several seconds and all 3 lights flash


Ha the Lamp ever been replaced and if so how long ago? If you have never replaced the lamp then it is time to replace it 1-800-628-1118

Oct 15, 2011 | Samsung DLP HL-P5663W 56" TV

1 Answer

Samsung PS50C91HDX Sound but no picture


It sounds like the main board or screen may have gone

Sep 26, 2009 | Samsung 50 in. Plasma TV

1 Answer

Screen is black on my Samsung LCD TV


Press your input button for the correct input your using for cable or viewing regular channels.

Apr 14, 2009 | Samsung LN-T4061F 40 in. LCD HDTV

1 Answer

My tv turns on but no picture or sound


power pack capacitors have failed they will need to be replaced with new ones and that should repair the tv, soldering skill is required to do this or replacement of the entire power pack.
hope this helps

Apr 07, 2009 | Samsung Televison & Video

2 Answers

No picture on screen


MYGR8-YOU HAVE TO LIST BRAND NAME AND MODEL #. JOE TV

Nov 30, 2007 | Televison & Video

4 Answers

TV WENT OFF BY ITSSELF


This may denote a proble in either your switching powers supply or your Horizontal section derived high voltage power supply. These are both very dangerous sections in your television. My next question is important; do you have a background in electronics? If not I would not advise you working on this problem yourself and that you take the TV to a repair shop for servicing. If you do have some background in electronics, I would like for you to make the following obeservations: What was the TV doing (it actions)prior to it going out? Did you hear any sounds before it went out like buzzing or crackling? What do you hear when you try to turn it on now, clicking? These questions are just to develop some background into what might be happening to your set. Thank you, Shuttle83

Oct 07, 2007 | RCA 32V524T TV

1 Answer

TV


If you are using cable and the signal is connected to the TV through the regular cable wire, then the TV must be in TV mode to work properly. If you are using a cable box with that TV then the TV must be on channel 3. If the screen shows AV 1, then the TV is in the AV mode (red, white and yellow RCA jacks), and you most likely accidently hit the INPUT button on the remote. Pressing 0 3 or INPUT a couple of times on the remote should bring your picture back.

Aug 09, 2007 | Samsung DynaFlat TX-P2775H 27" TV

Not finding what you are looking for?
Samsung HLN437W 43" Rear Projection HDTV Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...