Question about AEG Lavamat 74640 Front Load Washer

Open Question

Aeg oka-lavamat 74620 update ,c3 error - AEG Lavamat 74640 Front Load Washer

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: AEG LAVAMAT 74620 shows "CE" error

I fixed it, but I still don't know for sure what the "CE" error code is. I guess it is for the water distributor. I opened it up. There are some gears in there that move a mechanical arm that distributes the water into different containers. The mechanical arm moves around an axis -- it was very difficult to move, so the gears kept slipping. I opened it, and put some greaze inside. Closing it up was a real pain. But it works, and I didn't have to wait around to receive a new distributor.

Posted on Dec 28, 2008

Ad
  • 3230 Answers

SOURCE: AEG OKO Lavamat Update washing machine LAVALOGIC 1600

Hello,
This error code (C3) means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

Good Luck!!

Posted on May 06, 2009

  • 326 Answers

SOURCE: I need cogs for my aeg lavamat where i CAN GET IT?

you can get it at  www.repairclinic.com

Posted on May 06, 2009

  • 1 Answer

SOURCE: my AEG lavamat 74620 doesnt fill up with water

I have the same problem but I think it is the Gears the orange cog goes up and the yellow than slips, clicking noise, I put some washers on top to hold them down more and the water is going in to the washer.

Posted on Nov 08, 2009

richroth
  • 9472 Answers

SOURCE: AEG Lavamat 74620 shows a Cd error code. Can you

CD means door lock is defective. this may be due to the door catch broken or even the main board being defective.

Posted on Nov 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I correct error code 25 on an AEG OK-LAVAMAT 74640 update washing machine mean?


Family error code "E20" means difficulties in draining, but I never heard for error code E25 on this model. Could be : E21, E23 and E24 error code.

Dado

Aug 24, 2014 | AEG Washing Machines

1 Answer

I need to replace the water pump og AEG Lavamat 74620 (1998)


So do it. there are two. one to recycle and one to exhaust. they are close to each other in the front bottom left hand corner of the casing below the drum and behind the lower front panel that contains the filter and drain. though it's far easier to get at them by removing the thing from situ and taking the back off.

Mar 18, 2013 | AEG Washing Machines

1 Answer

AEG Lavamat 74620 shows a Cd error code. Can you tell me what problem this indicates.


CD means door lock is defective. this may be due to the door catch broken or even the main board being defective.

Nov 23, 2010 | AEG Washing Machines

2 Answers

My AEG lavamat 74620 doesnt fill up with water


Hello,
This means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

Good Luck!!

May 06, 2009 | AEG Lavamat 72640 Front Load Washer

1 Answer

AEG OKO_LAVAMAT 74620 gave me a code error C7. What is it?


take off the bottom front panel, a booklet is taped to the right side of the panel for the sevice tech it has all the codes

Feb 28, 2009 | AEG Lavamat 72640 Front Load Washer

1 Answer

AEG LAVAMAT 74620 shows "CE" error


I fixed it, but I still don't know for sure what the "CE" error code is. I guess it is for the water distributor. I opened it up. There are some gears in there that move a mechanical arm that distributes the water into different containers. The mechanical arm moves around an axis -- it was very difficult to move, so the gears kept slipping. I opened it, and put some greaze inside. Closing it up was a real pain. But it works, and I didn't have to wait around to receive a new distributor.

Dec 27, 2008 | AEG Lavamat 16810 Front Load Washer/Dryer

1 Answer

AEG OKO Lavamat Update washing machine LAVALOGIC 1600


Hello,
This error code (C3) means your water sensor has detected a leak. it will stop when the sensor is dry.
Try getting the water out of the trap door and letting the machine dry.

I would also unplug it for secirity reasons.

Basically your water pump is getting tired or the sensor is dirty. Try cleaning the sensor or else you may have to change the pump.

Good Luck!!

Dec 10, 2007 | AEG L86800 Front Load Washer

3 Answers

AEG LAVAMAT 74620 - Washing Machine CE error code


Replace Water distributor (Dispenser Drawer) then will be Ok

Rafiq

Aug 27, 2007 | Washing Machines

Not finding what you are looking for?
AEG Lavamat 74640 Front Load Washer Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top AEG Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1466 Answers

Einar Axel...
Einar Axel...

Level 1 Expert

12 Answers

Are you an AEG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...