Question about FoodSaver Smartseal V3485 Brushed Stainless Steel and Black

Open Question

Where is tray to empty on v3485

Where is tray to empty

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I open the canister


Make, model? Your question is asking a doctor what is wrong with you and giving him no info.

Nov 22, 2014 | Vacuums

1 Answer

V3835 tray full light won't go out after both trays have been emptied and cleaned.


Hair dryer. Remove both tray inserts and dry thoroughly, paying special attention to the sensor area in the center of the upper tray.

Sep 26, 2013 | FoodSaver V3835 Vacuum Food Sealer with...

1 Answer

Renovator is not sucking up suds into tray


1) test the hose for clogged
2) bag/tank full need emptied.
3) tight everything.
God bless you
7_15_2012_10_57_27_am.jpg7_15_2012_10_57_49_am.jpg

Jul 14, 2012 | Kirby Heritage II Vacuum

1 Answer

Shampooer does not distribute foam


It usually means you have no filter or a defective filter in your shampooer hose,or your not using kirby shampoo.

Dec 09, 2011 | Kirby G6 Bagged Upright Vacuum

1 Answer

I have bissell powerforce turbo bagless upright vacuum. Its a great machine. It is clogged though. I think I was not emptying the dirt collection tray thing enough. How can I unclog it. Its not sucking up...


remove the hose , clear that , then if you take a wire hanger apart you can pull whatever is remaining out of that connection, also remember to clean ( if you have the cleanable filter) the filter and also the top one

May 18, 2011 | Bissell Vacuums

1 Answer

Keurig model B40 How do I empty the resevoir , I can empty the cold watet tank. We are moving so need to completely empty all water.


Hi,

The water reservoir lifts out. There are two tabs on the side which lock it in place. You may have to pres on them to remove it. If you are wanting to completely empty the entire machine, I have found an instruction manual and have instructions for purging: Fill reservoir with clean water and replace on machine with lid on it. Raise and lower handle without K cup inserted. Wait for the red light next to "heating goes off.
The blue lights on the control center will begin flashing. Put a cup on the drip tray and press "Brew"

When finished, repeat brew procedure 2 or 3 times and inner tank should be empty.

Hope this helps, if it does, please place a vote for me.

Good luck with your move,

Handie Andie

Mar 28, 2011 | Vacuums

1 Answer

How do you use the rainbow to **** up a large amount of water from an air conditioner tray


You simply begin with an empty water basin, turn the unit on, and gingerly slurp the water away. Do not plunge the nozzle into a pool of water. Afterall, this is a vacuum cleaner, it moves air and the water/debris you kick-up into the air, not a water pump. The standard basin has a maximum capacity of 2 quarts, before the unit effectively drowns. If you have the special larger basin, then it has a 4 quart capacity. If you are trying to remove a larger volume of water, then you will have to empty the water basin multiple times. Unfortunately, you have to keep a close eye on the water level, so that you do not drown the vacuum.

Mar 23, 2011 | Rainbow E series Canister Wet/Dry Vacuum

19 Answers

The tray full light stays on even though the tray is empty.this prevent the foodsaver from operating.I have tried unplugging,recleaning the tray but nothing works


I had the save problem with my 3400 series.
The first time i was able to let it dry and it worked alright (48 hours).
The second time even this did not work.
If you remove the screws on the bottom of the unit. There are about 10 and pull it down, you will see the sealer assembly and a small circuit board in the middle.
Trace the wires from the drip tray, there are three of them, red white and brown, to the small white plastic JST connector on the small circuit board. Pull said connector gently to disconnect it.
The unit will function perfectly now, although it will no longer have a drip tray sensor of any sort it will function every time all the time.
All in all this took me about 10 minutes.
Thanks!

Sep 09, 2010 | Vacuums

1 Answer

Roomba does not fill upper tray.


brushes are not turning, you can see this if you remove dust bin and start the roomba, remove brushes clean thoroughly removing yellow end pieces as well to remove trapped hair, re inbstall brushes and turn manually about 20 turns and re try cleaning, try this a couple of times

Jul 06, 2010 | iRobot Roomba 530 Robotic Vacuum

Not finding what you are looking for?
FoodSaver Smartseal V3485 Brushed Stainless Steel and Black Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top FoodSaver Vacuums Experts

Lawrence Oravetz

Level 3 Expert

9324 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2760 Answers

George Sararu

Level 1 Expert

45 Answers

Are you a FoodSaver Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...